Abstract
This study was designed to study on major components of various Bee Venom(Bee Venom by electrical stimulation in Korea; K-BV I, Bee Venom by Microwave stimulation in Korea; K-BV II, 0.5mg/ml, Fu Yu Pharmaceutical Factory, China; C-BV, 1mg/ml, Monmouth Pain Institute, Inc., U.S.A.; A-BV) using HPLC(High performance liquid chromatography). The results were summarized as follows : 1. HPLC method is useful for analysis of Bee Venom when solution rate is above 1:4000. 2. Analysis of Apamin using HPLC, the Retention time was 8.7min, and standard measurement curve was a function of y=4E+06x+21245. 3. Analysis of Melittin using HPLC, the Retention time was 29.0 min, and standard measurement curve was a function of y=4E+06x+23015. 4. Concentration of Melittin was about 297times than Apamin in K-BV I, and about 329times in K-BV II at same 1:500 solution rate, abnormally about 12 times in C-BV at 1:4000 solution rate. 5. Chinese Bee Venom using HPLC, the point from 5 to 7min(Retention time) showed a big extraordinary peak. These data from the study can be applied to establish the standard measurement of Bee Venom and prevent pure bee venom from mixing of another components. I think it is desirable to study more about safety of Bee Venom as time goes by.