Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristic Analysis of Powder Forging Processes for Engine Pistons by Finite Element Analysis

유한요소 해석을 통한 피스톤 분말단조 공정의 특성 분석

  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is concerned with the comparison of forging characteristics between forward and backward processes, through the three-dimensional finite element simulation, for the aluminum powder forging of engine pistons. Starting from the theoretical formulation of velocity and temperature fields in the sintered preform during the process, we examine the comparative distributions of relative density, effective stress and temperature as well as the variations of total forging load and total volume reduction. Through the comparative results, we find out that the forward method provides better forging characteristics than the backward method.

Keywords

References

  1. Ashoka, G. and Jinka, K., 1997, 'A New Three Dimensional Finite Element Model for the Simulation of Powder Forging Process : Application to Hot Forming of P/M Connecting Rod,' Int. J. Numer. Methods Engrg. Vol. 40, pp. 3955-3978 https://doi.org/10.1002/(SICI)1097-0207(19971115)40:21<3955::AID-NME210>3.0.CO;2-U
  2. 박종진, 1993, '소결분말 금속의 항복함수,' 대한기계학회논문집 제17권 제5호, pp. 1115-1122
  3. 주영신, 조진래, 김영호, 1999, '자동차 엔진피스톤 분말단조 공정에 대한 유한요소해석,' 대한기계학회 추계학술대회논문집, pp. 934-939
  4. Chenot, J. L., Bay, F. and Fourment, L., 1990, 'Finite Element Simulation of Metal Powder Forming,' Int. J. Numer. Methods Engrg. Vol. 30, pp. 1649-1674 https://doi.org/10.1002/nme.1620300820
  5. Simo, J. C., Taylor, R. L. and Pistev, K. S., 1985, 'Variational and Projection Method for the Volume Constraint in Finite Deformation Elasto-Plasticity,' Comput. Methods Appl. Mech. Engrg. Vol. 51, pp. 177-208 doi:10.1016/0045-7825(85)90033-7
  6. Cho, J. R. and Ha, D. Y., 'Convergence and Stability Analysis of the Crank-Nicolson-Galerkin Scheme for Linear parabolic Systems,' Finite Elements Anal. Design (in review)
  7. Cho, J. R., Joo, Y. S. and Jeong, H. S., 'Al - Powder Forging Process : Its Finite Element Analysis,' J. Mater. Process. Technol. (in press)
  8. Johnson, C., 1990, Numerical Solution of Partial Differential Equations by the Finite Element Method, Cambridge University Press, Cambridge
  9. Kobayashi, S., Oh, S. I. and Altan, T., 1989, Metal Forming and the Finite Element Method, Oxford University Press, Oxford
  10. Green, R. J., 1972, 'A Plasticity Theory for Porous Solids,' Int. J. Mech. Sci. Vol. 14, pp. 215-224 https://doi.org/10.1016/0020-7403(72)90063-X