대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제24권6호
  • /
  • Pages.1575-1583
  • /
  • 2000
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

샌드위치 사출성형공정에 관한 수치해석

Numerical Simulation of the Sandwich Injection Molding Process

  • 발행 : 2000.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, the sandwich injection molding has drawn attention because it offers the flexibility of using the optimal properties of two different but compatible polymers and is also one of the most p romising methods in connection with recycling of thermoplastics. In this paper, a new particle tracing algorithm is presented in order to describe the advancement of core polymer melt during filling stage. The main advantage of this algorithm is the use of identity field information rather than tracking a set of fluid particles. In addition, to model the process accurately, especially to detect the possible

키워드

참고문헌

  1. Lanvers, A., and Michaeli, W., 1992, 'CAE for Coinjection and Gas-Assisted Injection Molding,' SPE ANTEC Technical Paper, pp. 1796-1799
  2. Seldon, R., 1997, 'Sandwich Injection Molding of Thermoplastics-A Literature Survey,' J. of Injection Molding Technology, Vol. 1, No. 4, pp. 189-203
  3. Isayev, A. I., 1987, Injection and Compression Molding Fundamentals, Marcel Dekker Inc., New York
  4. Bernhardt, E. C, 1983, Computer Aided Engineering for Injection Molding, Hanser Publishers, Munich Vienna New York
  5. Middleman, S., Fundamentals of Polymer Processing, McGraw-Hill, Inc.
  6. Donovan, R. C. et al., 1975, 'Recycling Plastics by Two-shot Molding,' Polym. Eng. and Sci., Vol. 15, No. 11, pp. 774-780 https://doi.org/10.1002/pen.760151103
  7. White, J., and Lee, B. L., 1975, 'An Experimental Study of Sandwich Injection Molding of Two Polymer Melts Using Simultaneous Injection,' Polym. Eng. and Sci., Vol. 15, No. 7, pp. 481-485 https://doi.org/10.1002/pen.760150702
  8. Young, S. S. et al., 1980, 'A Basic Experimental Study of Sandwich Injection Molding with Sequential Injection,' Polym. Eng. and Sci., Vol. 20, No. 12, pp. 798-804 https://doi.org/10.1002/pen.760201206
  9. Turng, L. S., Wang, V. W., and Wang, K. K., 1993, 'Numerical Simulation of the Coinjection Molding Process,' J. of Eng. Mat. Techn., Vol. 115, pp. 48-53
  10. Turng, L. S., and Wang, V. W., 1991, 'Simulation of Co-Injection and Gas-Assisted Injecion Molding,' SPE ANTEC Technical Paper, pp. 297-300
  11. Chen, S. C. and Hsu, K. F., 1995, 'Numerical Simulation and Experimental Verification of Melt Front Advancements in Coinjection Molding Process,' Numer. Heat Transfer A, Vol. 28, pp. 503-513 https://doi.org/10.1080/10407789508913758
  12. Schlatter, G. et al., 1995, 'Numerical Simulation of the Sandwich Injection Moulding Process,' SPE ANTEC Technical Paper, pp 456-460
  13. Hsu, K. F., 1994, 'Numerical Simulation of Multi-Component Injection Molding Process,' Master's thesis, Chung Yuan University, Taiwan
  14. Manogg, G. J., Townsend, P. and Webster, M. F., 1997, 'Numerical Simulation of Multilayer Injection Moulding,' J. Non-Newtonian Fluid Mech. Vol. 68, pp. 153-167 https://doi.org/10.1016/S0377-0257(96)01517-0
  15. Wang, K. K., et al., 1984, 'Computer-Aided Design and Fabrication of Molds and Computer Control of Injection Molding,' Progress Report No. 10, Cornell Injection Molding Program, Cornell Univ
  16. Manas-Zloczower, I., Blake, J. W., and Macosko, C. W., 1987, 'Space-Time Distribution in Filling A Mold,' Polym. Eng. and Sci., Vol.27. No. 16, pp. 1229-1235 https://doi.org/10.1002/pen.760271605
  17. Dupret, F., and Vanderschuren, L., 1988, 'Calculation of the Temperature Field in Injection Molding,' AICHE J., Vol. 34. No. 12, pp. 1959-1972 https://doi.org/10.1002/aic.690341205
  18. Tompson, E., 1986, 'Use of Pseudo-Concentrations to follow creeping Viscous Flows during Transien Analysis,' Int, J. Numer. Meth. Fluids. Vol. 6, pp. 749-761 https://doi.org/10.1002/fld.1650061005