참고문헌
- N. P. Suh, 1990, 'The Principles of Design,' The Oxford University Press
- 김우승, 1997, '전동 스티어링 컬럼,' 대한기계학회지, 제37권 10호, p. 82
- Shyu, S., Mani, A., Krishnaswamy, P., Conroy, R., Shermetaro, M., and Exner, G., 'Designing Energy Absorbing Steering Wheels Through Finite Element Impact Simulation,' SAE paper No. 931844
- Park, Y. S., Lee, J. Y., Lim, J. M. and Park, G. J., 1996, 'Optimum design of a steering column to minimize the injury of a passenger,' International Journal of Vehicle Design, Vol. 17, No. 4, pp. 398-414
- 김희수, 최양욱, 1996, '신차개발과정에서 충돌해석의 역할,' 대한기계학회지, 제36권, 제9호, pp. 867-875
- 조병관, 류길하, 강홍대, 1995, '상용차 조향계 의 진동 해석,' 자동차공학회논문집 제3권, 제2호, pp. 86-94
- 임재문, 1997, '차량충돌시 승객거동해석을 위한 소프트웨어의 개발 및 관련 부품의 설계방안 제시,' 한양대학교 박사학위 청구논문
- Obergefell, L. A., Gardner, T. R., Kaleps, I. and Fleck, J. T., 1988, 'Articulated Total Body Model Enhancements,' Report No. AAMRL-TR-88-043
- 박경진, 임재문, 최우석, 한선규, 전원기, 1997, '충돌안전도규정(FMVSS 203)을 만족하기 위한 에너지흡수 조향계의 해석 및 설계,' (주)삼성전기 최종보고서
- 임재문, 한선규, 전원기, 우덕현, 박경진, 1997, '직교배열표를 이용한 에너지 흡수 조향계의 해석 및 설계,' 한국자동차공학회 춘계학술대 회 Vol. 2, pp. 401-406
- 이권희, 1996, '연속 및 이산 설계공간에서의 구조물에 대한 강건최적설계, '한양대학교 박사 학위 청구논문
- 박영선, 이주영, 박경진, 1995, '직교배열표를 이용한 승용차의 에어백의 설계,' 자동차공학회 논문집, 제3권, 제2호, pp. 62-76
- Wang, J. T. and Lin, K. H, 'A Cal3d Steering System Impact Model,' SAE Paper No. 880650
- GENESIS User's manual, VMA Engineering, 1997
- 49CFR, Part 571, FMVSS 203, 'Impact Protection for the Driver from the Steering Control System,' DOT, NHTSA, USA
- ' 자동차 안전기준 시행 세칙 ', 건설교통부, 1993
- Horsch, J. D., Viano, D. C. and Decou, J., 'History of Safety Research and Development on the General Motors Energy-Absorbing Steering System,' SAE paper No. 912890
- Phadke, M. S., 1989, 'Quality Engineering Using Robust Design,' Prentice Hall
- 박성현, 1991, '현대실험계획법', 민영사
- Gillespie, T. D., 1992, 'Fundamentals of Vehicle Dynamics,' SAE
- Vries, A., Wagner, M., 'The Brake Judder Phenomenon,' SAE paper, No. 920554
- Petyt, M., 1990, 'Introduction to Finite Element Vibration Analysis,' Cambridge University Press, Boston
- Todd Schiller and Tatsuo Osawa, ' Incopotation of Analytical simulations into the NVH Design and Development Process of the Nissan Quest,' SAE Paper No. 922121
- Gi Seob Jeong, Jin Kwan Suh, and Seung Gyeon Jung, 1996, ' Validation of FE Models for NVH Simulation,' Proceedings of the 14th International Modal Analysis Conference, pp 1265-1271
- Arora, J. S., 1989, 'Introduction to Optimum Design,' McGraw-Hill book Company, New York
- Garret N. Vanderplaats, 1984, ' Numelcal Optimization Techniques for Engineering design,' McGraw-Hill Book Company