참고문헌
- Wu, H.C. and Yang, C.C. 1987, 'On the Influence of Strain-Path in Multiaxial Fatigue Failure,' Trans. ASME, J. Engng Mater. Tech. 109, pp. 107-113
- Socie, D.F. and Shield, 1984, T.W., 'Mean Stress Effects in Biaxial Fatigue of Inconel 718,' Trans. ASME, J. Engng Mater. Tech. 106, pp. 227-232
- Ogata, T. Nitta, A. and Blass, J.J., 1993, 'Propagation Behavior of Small Cracks in 304 Stainless Steel under Biaxial Low-Cycle Fatigue at Elevated Temperature,' ASTM STP 1191, pp. 313-325
- Berard, J.Y. McDowell, D.L. and Antolovich, S.D., 1993, 'Damage Observation of a Low-Carbon Steel under Tension-Torsion Low-Cycle Fatigue,' ASTM STP 1191, pp. 326-344
- Zhang, W. and Akid, R., 1997, 'Effect of Biaxial Mean Stress on Cyclic Stress-Strain Response and Behavior of Short Fatigue Cracks in a High Strength Spring Steel,' Fatigue Fract. Mater. Struct. 20, pp. 167-177 https://doi.org/10.1111/j.1460-2695.1997.tb00276.x
- Iida, l.S. and Kobayashi, A.S., 1969, 'Crack Propagation Rate in 7075-T6 Plates under Cyclic Tensile Stress and Transverse Shear Loading,' J. Bas. Engng. ASME Trans., 91, pp. 764-769
- Tanaka, K., 1974, 'Fatigue Crack Propagation from a Crack Inclined to the Cyclic Tensile Axis,' Engng Fracture Mech., 6,pp. 493-507 https://doi.org/10.1016/0013-7944(74)90007-1
- Sih, G.C., 1974, 'Strain Energy Density Factor Applied to Mixed Mode Crack Problem,' Int. J. Fracture, 10, pp. 279-284 https://doi.org/10.1007/BF00035493
- Sih, G.C. and Barthelemy, B.M., 1980, 'Mixed Mode Fatigue Crack Growth Prediction,' 1980, Engng Fract. Mech., 13, pp. 439-451 https://doi.org/10.1016/0013-7944(80)90076-4
- Lam, Y.C., 'Fatigue Crack Growth under Biaxial Loading,' 1993, Fatigue Fract. Engng Mater. Structures, 16, pp. 429-440 https://doi.org/10.1111/j.1460-2695.1993.tb00098.x
- Gao, H. Alagok, N. Brown M.W., and Miller, K.J., 1985, 'Growth of Fatigue Cracks under Combined Mode I and Mode II Loads,' ASTM STP 853, pp. 184-202
- Li, C, 1989, 'Vector CTD Criterion Applied Mixed Mode Fatigue Crack Growth,' Fatigue Fracture Engng Mater. Structures, 12, pp. 59-65 https://doi.org/10.1111/j.1460-2695.1989.tb00508.x
- Elber, W., 1971, 'The Significance of Fatigue Crack Closure,' ASTM STP 486 pp. 230-242
- 김훈, 종지호, 1998, 'Automation of Fatigue Crack Growth Testing Through Real Time Measurements of Crack Length and Crack Opening Load,' 대한기계학회 1998년도 추계학술대회논문집A, pp. 346-352
- Lakshminarayana, H.V. and Murthy, M.V.V., 1976, 'On Stress Around an Arbitrarily Oriented Crack in a Cylindrical Shell,' Int. J. of Fracture, 12,4, pp. 547-566
- Socie, D., 'Multiaxial Fatigue Damage Models,' 1987, ASME J. of Engng. Mater. and Tech. Vol. 109, pp. 293-298