References
- Greenwood, G. W., Seeds, W. E. and Yue, S., 1978, Forging and Properties of Aerospace Materials, The Materials Society, London, pp. 249-259
- Chockalingam, K. S. K., Neelakantan, M, Devaraj, S. and Padmanabhan, K. A., 1985, 'On the Pressure Forming of two Superplastic Alloys,' J. Mat. Sci, Vol. 20, pp.1310-1320 https://doi.org/10.1007/BF01026327
- Boyer, R., Welsch, G. and Collings, E. W., 1994, Materials Properties Handbook : Titanium Alloys, ASM International, pp. 483-636
- Froes, F. H. and Eylon, D., 1984, Titanium Net Shape Technologies, The Metallurgical Society of AIME, California, pp. 1-120
- Svoboda, A., Haggblad, H. A. and Karlsson, L., 1997, 'Simulation of Hot Isostatic Pressing of a Powder Metal Component with an Internal Core,' Comput. Methods Appl. Mech. Eng. Vol. 148, pp. 299-314 https://doi.org/10.1016/S0045-7825(96)01180-2
- Redanz, P., 1998, 'Numerical Modelling of Cold Compaction of Metal Powder,' Int. J. Mech. Sci., Vol. 40, No. 11, pp. 1175-1189 https://doi.org/10.1016/S0020-7403(98)00021-6
- Lewis, R. W., Jinka, A. G. K. and Gethin, D. T., 1993, 'Computer-Aided Simulation of Metal Powder Die Compaction Processes,' Powder Metall. Int., Vol. 25, No. 6, pp. 287-293
- Gethin, D. T., Tran, V D., Lewis, R. W. and Ariffin, A. K., 1994, 'An Investigation of Powder Compaction Processes,' Int. J. Powder Metall., Vol. 30, No. 4, pp. 385-398
- Abondance, D., Dellis, Ch., Baccino, R., Bernier, F., Moret, F., De Monicault, J. M., Guichard, D. and Stutz, P., 1996, 'Numerical Modelling of Near-net-shape HIPing of Ti-6A1-4V Powder,' Titanium '95 Science and Technology, The Institute of Materials, London, PP. 2634-2640
- Blenkinsop, P. A., Evans, W. J. and Flower. H. M., 1996, Titanium '95 Science and Technology Proceedings of the Eighth World Conference on Titanium, The Institute of Materials, London
- Powder Metallurgy, Metals Handbook, 9th ed., Vol. 7, U.S.A., 1984
- Cadle, T. M. and Narasimhan, K. S., 1996, Advances in Powder Metallurgy & Particulate Materials, Metal Powder Industries Federation, Princeton
- Cho, H. K., Suh. J. and Kim, K. T., 1994, 'Densification of Porous Alloy Steel Preforms at High Temperature,' Int. J. Mech. Sci., Vol. 36, No. 4, pp. 317-328 https://doi.org/10.1016/0020-7403(94)90038-8
- Harding, J., 1989, 'Constitutive Modelling of Material Mechanical Behavior at High Rates of Strain,' International Summer School on Dynamics Behavior of Materials, Ecole Centrale de Nantes, Nantes, France
- Meyers, M. A., 1994, Dynamic Behavior of Materials, John Wiley & Sons Inc., U.S.A.
- Zerilli, F. J. and Armstrong, R. W., 1995, In Shock Compression of Condensed Matter, Elsevier, Amsterdam
- da Silva, M. G. and Ramesh, K. T, 1997, 'The Rate-Dependent Deformation and Localization of Fully Dense and Porous Ti-6A1-4V,' Mat. Sci. Eng. A, A232,pp. 11-22 https://doi.org/10.1016/S0921-5093(97)00076-2
- Kim, K. T., 1988, 'Elastic-Plastic Response of Porous Metals under Triaxial Loading,' Int. J. Solids Structures, Vol. 24, No. 9, pp. 937-945 https://doi.org/10.1016/0020-7683(88)90042-X
- Shima, S. and Oyane, M., 1976, 'Plasticity Theory for Porous Metals,' Int. J. Mech. Sci., Vol. 18, pp. 285-291 https://doi.org/10.1016/0020-7403(76)90030-8
- Green, R. J., 1984, 'A Plasticity Theory for Porous Solids,' Int. J. Mech. Sci., Vol. 26, pp. 215-224 https://doi.org/10.1016/0020-7403(72)90063-X
- Doraivelu, S. M., Gegel, H. L., Gunasekera, J. S., Malas, J. C. and Morgan, J. T., 1984, 'A New Yield Function for Compressible P/M Materials,' Int. J. Mech. Sci., Vol. 26, pp. 527-534 https://doi.org/10.1016/0020-7403(84)90006-7
- Kim, K. T, Suh, J. and Kwon, Y. S., 1990, 'Plastic Yield of Cold Isostatically Pressed and Sintered Porous Iron Under Tension and Torsion,' Powder Metall. Vol. 33, No. 4, pp. 321-326
- Kuhn, H. A. and Downey C. L., 1971, 'Deformation Characteristics and Plastic Theory for Sintered Powder Materials,' Int. J. Powder Metall. Vol. 7, No. 15, pp. 15-25
- ABAQUS User's I, II and III Manual, Ver. 5.8, Hibbitt, Karlsson, and Sorensen, 1999
- Aravas, N., 1987, 'On the Numerical Integration of a Class of Pressure-Dependent Plasticity Models,' Int. J. Num. Meth. Eng., Vol. 24, pp. 1395-1416 https://doi.org/10.1002/nme.1620240713
- Hehenberger, M., Samuelson, P., Aim, O., Nilsson, L., and Olofsson, T., 1982, 'Experimental and Theoretical Studies of Powder Compaction,' In IUTAM Conference on Deformation and Failure of Granular Materials, Delft, pp. 381-390
- Govindarajan, R. M., 1992, Deformation Processing of Porous Metals, Doctoral thesis, University of Pennsylvania, U.S.A.
- Kim, K. T., 1989, 'A Temperature Dependent Strain Hardening Law,' Res. Mechanica, Vol. 26, pp. 371-382
- Kim, K. T. and Cho., Y. H., 1992, 'A Temperature and Strain Rate Dependent Strain Hardening Law,' Int. J. Press. Ves. & Piping, Vol. 49, pp. 327-337 https://doi.org/10.1016/0308-0161(92)90120-5
- Naghdi, P. M., 1984, 'Constitutive Restrictions for Idealized Elastic-Viscoplastic Materials,' J. Appl. Mech.,Vol. 51, pp. 93-101
- SAS language: reference, Ver. 6.0, Sas Institute, 1990
- Borse, G. J., 1991, Fortran 77 and Numerical Methods for Engineers, PWS-KENT Pub. Co.
- Altan, T., Oh, S. I., and Gegel, H. L., 1983, Metal Forming (Fundamentals and Applications), American Society For Metals