대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제24권3호
  • /
  • Pages.743-751
  • /
  • 2000
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

잔류응력을 고려한 점용접이음재의 피로설계

Fatigue Design of Spot Welded Lap Joint Considered Residual Stress

  • 발행 : 2000.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Because welding residual stress is formidable result in electric resistance spot welding process, and it detrimentally affect to fatigue crack initiation and growth at nugget edge of spot welded la p joints, it should be considered in fatigue analysis. Thus, accurate prediction of residual stress is very important. In this study, nonlinear finite element analysis on welding residual stress generated in process of the spot welding was conducted, and their results were compared with experimental data measured by X-ray diffraction method. By using their results, the maximum principal stress considered welding residual stress at nugget edge of the spot welded lap joint subjected to tension-shear load was calculated by superposition method. And, the $\Delta$P- $N_f$ relations obtained through fatigue, tests on the IB-type spot welded lap joints was systematically rearranged with the maximum principal stress considered welding residual stress. From the results, it was found th2at fatigue strength of the IB-type spot welded lap joints could be systematically and more reasonably rearranged by the maximum principal stress($\sigma$1max-res considered welding residual stress at nugget edge of the spot welding point.

키워드

참고문헌

  1. Fujimoto, 1979, 'The Stress and Displacement of IB Type Spot-welded Lap Joint under Tension-Shear Load,' JSAE Review, No. 17
  2. ASTM, 1981, 'Residual Stress Effect in Fatigue,' ASTM STP 776
  3. Bae, D. H., 1981, 'The Fracture Mechanical Fatigue Strength Evaluation of IB Type Spot-Welded Lap Joint under Tension-Shear Load,' KSAE Review, Vol. 13, No. 5, pp. 42-50
  4. Radaj, D., Zhang, S., 1995, 'Geometrically Nonlinear Behavior of Spot-welded Joint in Tensile and Compressive Shear Loading,' Engineering Fracture Mechanics, Vol. 51, No. 2, pp. 281-294 https://doi.org/10.1016/0013-7944(94)00126-3
  5. Radaj, D., Zhaoyun, Z. and Mohrmann, W., 1990, 'Local Stress Parameter at The Weld Spot of Various Specimen,' Engineering Fracture Mechanics, Vol. 37, No. 5, pp. 993-951
  6. Huda, H., 1997, 'Electro Thermal Analysis of Electric Resistance Spot-welding Process by 3-D FEM,' Journal of Materials Processing Technology, No. 63, pp. 672-677 https://doi.org/10.1016/S0924-0136(96)02705-7
  7. Tsai, C. L. and Dickinson, D., 1989, 'Study of Nugget Formation in Resistance Spot-welding using Finite Element Method,' 1989 Material Park conference, ASM International Materials, pp. 43-53
  8. Anastassiou, M., 1990, 'Residual Stress and Micro Structure Distribution in Spot-welded Steel Sheet; Relation with Fatigue Behavior,' Material Science and Engineering, A125, pp.141-156
  9. Nied, H. A., 1984, 'The Finite Element Modeling of the Resistance Spot Welding Process,' Welding Research Supplement, pp. 123-132
  10. Goldsmith, A., 1961, 'Handbook of Thermo Physical Properties of Solid Materials,' Reversed Edition, Vol. II, The Macmillan Co, pp. 28-56
  11. RWMA, 1981, 'Residual Welding Manual,' Vol. 1, pp. 119-143
  12. Rigaku Co., 1987, 'X-선 응력측정장치 manual,' pp. 1-16
  13. Shigley, J. E. and Mischke, C. R., 1989, Mechanical Engineering Design, 5th Edition, Mcgraw-Hill, pp. 286-288
  14. Bae, D. H., 1988, 'Stress Distribution and Fatigue Strength Evaluation of a Single Elliptical Spot Welded Lap Joint under Tension-Shear Load,' Transaction of JSAE, No. 39, pp. 98-104
  15. JSAE Committee, 1987, 'The Data Book of Spot- welding Fatigue Strength,' JSAE
  16. Ilseon Sohn, 1989, 'A study on the fatigue design methods and expert system development for thin steel sheet spot-welded lap joint,' Ph,D thesis, Sungkyunkwan University