Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on the Strength Evaluation of Mechanical Press Joint

기계적 프레스 접합부의 강도 평가에 관한 실험적 연구

  • Published : 2000.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Mechanical press joining technique has been used in sheet metal joining processes because of its simple process and possibility of joining dissimiliar metals, such as steel and aluminum. The static and cyclic behavior of single overlap AI-alloy and steel(SPCC) joints has been investigate. Relationships were developed to estimate the strength of the joint taking into consideration base metal strength properties and the geometry of the joint. Fatigue test results have shown that fatigue resistance of the SPCC mechanical press joints is almost equal to that of the spot weld at the life of $10^6$ cycles. Also, the dissimilar material jointed specimen with upper SPCC plate and button diameter corresponding to the nugget diameter of the spot welded specimen has almost same strength as the same material jointed specimen and as the spot welded specimen.

Keywords

References

  1. 손병천, 우승엽, 이재범, 최용범, 장희석, 1996, '이종재료(알루미늄함금-강판)의 저항 점용접에 관한 연구,' 대한용접학회지, 제15권, 제4호, pp. 268-288
  2. Larsson, J. K., 1994, 'Clinch Joining - A Effective Joining Technique for Body - In - White Assembly,' Advanced Technique & Processes, IBEC'94, pp. 140-145
  3. Muraski, S. J., 1990, ' American Autos in the Clinch,' Machine Design, pp. 48-54
  4. Gao, S. and Budde, L., 1994, 'Mechanism of Mechanical Press Joining,' Int. J. Mach, Tools Manufact., Vol. 34, No. 5, pp. 641-657 https://doi.org/10.1016/0890-6955(94)90049-3
  5. Sawhill, J. M. Jr. and Sawdon, S. E., 1983, ' A New Mechanical Joining Technique for Steel Compared with Spot Welding,' SAE Paper 830128
  6. Krause, A. R. and Chernenkoff, R. A., 1995, ' A Compared with Study of the Fatigue Behavior of Spot Welded and Mechanically Fastened Aluminum Joints,' SAE Paper 950710
  7. 송삼홍, 김부동, 1984, ' 점용접부의 파괴거동과 응력분포,' 대한기계학회논문집, 제8권, 제3호, pp. 224-231
  8. Kurath, P., 1992, ' Multiaxial Fatigue Criteria for Spot Welds,' SAE Paper 920668
  9. Davidson, J.A. and Imhof, E.J.Jr., 1983, ' A Fracture Mechanics and System-Stiffness Approach to Fatigue Performance of Spot-Welded Sheet Steels,' SAE Paper 830034
  10. Abe, H., Kataoka, S., and Satoh, T., 1986, ' Emperical Formula for Fatigue Strength of Single-Spot-Welded Joint Specimens under Tensile-Shear Repeated Load,' SAE Paper 860606
  11. Davidson, J. A., 1983, ' A Review of the Fatigue Properties of Spot -Welded Sheet Steels,' SAE Paper 830033
  12. 권용우, 권순용, 박석완, 1997, ' 차체용 알루미늄관 접합부 피로특성,' 한국자동차공학회 추계학술대회 논문집, pp. 983-987