대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제24권1호
  • /
  • Pages.38-51
  • /
  • 2000
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

점용접시편의 극한하중과 피로특성에 관한 실험적 고찰

An Experimental Investigation of Limit Loads and Fatigue Properties of Spot Welded Specimens

  • 발행 : 2000.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The study on the mechanical behavior of a spot-welded specimen is largely divided into the quasi-static overload failure analysis and the fatigue failure prediction. The main issue in an overload analysis is to examine the critical loads, thereby providing a generalized overload failure criterion. As the welding spot forms a singular geometry of an external crack type, fatigue failure of spot-welded specimens can be evaluated by means of a fracture parameter. In this study, we first present the limit loads of 4 representative types of single spot-welded specimens in terms of the base metal yield strength and specimen geometries. Recasting the load vs. fatigue life relationships experimentally, obtained here, we then predict the fatigue life of spot-weld specimens with a single parameter denoted the equivalent stress intensity factor. This crack driving parameter is demonstrated to successfully describe the effects of specimen geometry and loading type in a comprehensive manner. The suggested fatigue life formula for a single spot weld can play a key, role in the design and assessment of spot-welded panel structures, in that the fatigue strength of multi-spots is eventually determined by the fatigue strength of each single spot.

키워드

참고문헌

  1. 이형일, 최진용, 1998, '점용접시편의 극한하중 해석 및 유효 J-적분에 의한 피로수명예측,' 대한기계학회 논문집 기고
  2. 이태수, 이형일, 신수정, 1998, '점 용접점 파단의 정략적 모델-1 파단조건식,' 한국자동차공학회 논문집, 제6권, 제6호, pp. 40-52
  3. 신수정, 이형일, 이태수, 최양욱, 1999, '점 용접점 파단의 정량적 모델-2 판형구조해석,' 한국자동차공학회 논문집, 제7권, 제1호, pp. 161-172
  4. Pook, L. P., 1975, 'Fracture Mechanics Analysis of the Fatigue Behavior of Spot Welds,' International Journal of Fracture, Vol. 11, pp. 173-176 https://doi.org/10.1007/BF00034726
  5. Wang, P. C. and Ewing, K. W., 1988, 'A J-integral Approach to Fatigue Resistance of a Tensile-Shear Spot Weld,' SAE Paper 880373
  6. Wang, P. C. and Ewing, K. W., 1991, 'Fracture Mechanics Analysis of Fatigue Resistance of Spot Welded Coach-Peel Joints,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 14, No.9, pp. 915-930 https://doi.org/10.1111/j.1460-2695.1991.tb00725.x
  7. 송삼홈, 김부동, 1984, '점용접재의 피로거동과 응력분포,' 대한기계학회 논문집, Vol. 8, No.3, pp. 224-231
  8. 배동호, 1991, '인장-전단하중을 받는 일점 spot 용접이음재의 파괴역학적 피로강도 평가,' 한국자동차공학회 논문집, 제13권, 5호, pp. 42-50
  9. 이강용, 김옥환, 1997, '점용접에 의하여 판재로 보강된 균열판의 수직응력에 의한 응력세기계수,' 대한용접학회지, Vol. 15, No. 1, pp. 55-65
  10. 이강용, 김옥환, 1998, '혼합형하중하에 있는 판재로 보강된 균열판의 응력세기계수,' 대한기계학회 논문집A, Vol. 22, No.3, pp. 569-578
  11. 손일선, 구재민, 정원석, 배동호, 1998, '인장-전단하중을 받는 IB형 일점 spot 용접이음재의 응력분포와 피로강도 평가,' 한국자동차공학회 논문집, 제6권, 제5호, pp. 20-27
  12. Ono, M., Tanaka, J., Yuuki, R and Kabasawa, M., 1986, 'Fatigue Strength and Strain Behavior of Spot Welded Joints in Steel Sheets for Automobiles,' Nippon Kokan Technical Report, No. 47, pp. 45-51
  13. ASTM, 1996, 'Standard Test Methods for Tension Testing of Metallic Materials,' Annual Book of ASTM Standards, No. E8M, American Society for Testing and Materials, Philadelphia, PA
  14. JIS Z-3140, 1989, 'Method of Inspection for Spot Weld.'
  15. Zuniga, S. T., 1994, Predicting Overload Pull-Out Failure in Resistance Spot Welded Joints, Ph. D. Dissertation, Stanford University, Chapter 2
  16. Cahoon, J. R., Broughton, W. H. and Kutzak, A. R., 1971, 'The Determination of Yield Strength from Hardness Measurements,' Metallurgical Transactions, Vol. 2, pp. 1979-1983
  17. KS B 0528, 1994, 'Method of Fatigue Testing for Spot Welded Joint.'
  18. Tada, H., Paris, P. C. and Irwin, G. R., 1985, The Stress Analysis of Cracks Handbook, 2nd Edition, Paris Production, Inc., St. Louis
  19. Jurf, R. A. and Pipes, R. B., 1982, 'Interlamina Fracture of Composite Materials,' Journal of Composite Materials, Vol. 16, pp. 386-394 https://doi.org/10.1177/002199838201600503
  20. Erdogan, F. and Sih, G. C., 1963, 'On Crack Extension in Plates under Plane Loading and Transverse Shear,' Journal of Basic Engineering, Vol. 85, pp. 519-527
  21. Broek, D., 1986, Elementary Engineering Fracture Mechanics, 4th Edition, Martinus Nijhoff Publishers, Chapter 14
  22. Melin, S., 1987, 'Fracture from a Straight Crack Subjected to Mixed Mode Loading,' International Journal of Fracture, Vol. 32, pp. 257-263 https://doi.org/10.1007/BF00018544
  23. Cotterell, B. and Rice, J. R., 1980, 'Slightly Curved or Kinked Cracks,' International Journal of Fracture, Vol. 16, No.2, pp. 155-169 https://doi.org/10.1007/BF00012619
  24. Hallback, N., 1997, 'The Influence of Finite Geometry and Material Properties on Mixed Mode I/II Fracture of Aluminium,' International Journal of Fracture, Vol. 87, pp. 151-177 https://doi.org/10.1023/A:1007339103082
  25. Pook, L. P., 1971, 'The Effect of Crack Angle on Fracture Toughness,' Engineering Fracture Mechanics, Vol. 3, pp. 205-218 https://doi.org/10.1016/0013-7944(71)90032-4