Structural Engineering and Mechanics

  • 제8권1호
  • /
  • Pages.103-118
  • /
  • 1999
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Deterministic structural and fracture mechanics analyses of reactor pressure vessel for pressurized thermal shock

  • Jhung, M.J. (Korea Institute of Nuclear Safety) ;
  • Park, Y.W. (Korea Institute of Nuclear Safety)
  • 발행 : 1999.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The structural integrity of the reactor pressure vessel under pressurized thermal shock (PTS) is evaluated in this study. For given material properties and transient histories such as temperature and pressure, the stress distribution is found and stress intensity factors are obtained for a wide range of crack sizes. The stress intensity factors are compared with the fracture toughness to check if cracking is expected to occur during the transient. A round robin problem of the PTS during a small break loss of coolant transient has been analyzed as a part of the international comparative assessment study, and the evaluation results are discussed. The maximum allowable nil-ductility transition temperatures are determined for various crack sizes.

키워드

참고문헌

  1. ASME (1995a), "Rules for construction of nuclear power plant components", ASME Boiler and Pressure Vessel Code, Section III.
  2. ASME (1995b), "Rules for inservice inspection of nuclear power plant components", ASME Boiler and Pressure Vessel Code, Section XI.
  3. Curry, D.A. (1983), "A model for predicting the influence of warm pre-stressing and strain aging on the cleavage fracture toughness of ferritic steels" , International Journal of Fracture, 22, 145-159. https://doi.org/10.1007/BF00942720
  4. Harvey, J.F. (1960), Theory and Design of Modern Pressure Vessels, 2nd ed., Van Nostrand Reinhold Co., New Jersey.
  5. McGowan, J.J. (1979), "Application of warm prestressing effects to fracture mechanics analyses of nuclear reactor vessels during severe thermal shock", Nuclear Engineering and Design, 51, 431- 444. https://doi.org/10.1016/0029-5493(79)90131-6
  6. Mishima, Y., et al. (1994), "PTS integrity study in Japan" , International Journal of Pressure Vessels and Piping, 58, 91-101. https://doi.org/10.1016/0308-0161(94)90012-4
  7. Myers, M.N. (1971), Analytical Method in Conduction Heat Transfer, McGraw-Hill, New York.
  8. Ozisik, M.N. (1980), Heat Conduction, John Wiley & Sons.
  9. Pennell, W.E. (1993), "Heavy-section steel technology program overview" , Nuclear Engineering and Design, 142, 117-135. https://doi.org/10.1016/0029-5493(93)90197-H
  10. Sievers, J. (1996), "Reactor pressure vessel pressurized thermal shock international comparative assessment study" , OECD/NEA PWG-3, December 23.
  11. Sievers, J. (1997), "The interim workshop on RPV PTS ICAS", OECD/NEA PWG-3, June 2.
  12. Stahlkopf, K.E. (1984), "Pressure vessel integrity under pressurized thermal shock conditions", Nuclear Engineering and Design, 80, 171-180. https://doi.org/10.1016/0029-5493(84)90165-1
  13. Timoshenko, S.P. and Goodier, J.M. (1970), Theory of Elasticity, 3rd ed., McGraw-Hill, New York.
  14. USNRC (1988), "Radiation embrittlement of reactor vessel materials", Regulatory Guide 1.99, Rev.2, US Nuclear Regulatory Commission, May.

피인용 문헌

  1. Round robin analysis of pressurized thermal shock for reactor pressure vessel vol.226, pp.2, 2003, https://doi.org/10.1016/S0029-5493(03)00191-2
  2. Round robin analysis for probabilistic structural integrity of reactor pressure vessel under pressurized thermal shock vol.19, pp.2, 2005, https://doi.org/10.1007/BF02916185
  3. Pressurized thermal shock analyses of a reactor pressure vessel using critical crack depth diagrams vol.76, pp.12, 1999, https://doi.org/10.1016/S0308-0161(99)00063-0
  4. Critical crack depth diagram of reactor vessel for pressurized thermal shock vol.239, pp.3, 2009, https://doi.org/10.1016/j.nucengdes.2008.11.012
  5. Autofrettage effects on strength and deformation of fiber reinforced pressure vessel vol.27, pp.3, 2007, https://doi.org/10.12989/sem.2007.27.3.277
  6. 원자로 용기의 가압열충격에 대한 파괴역학 해석 - 탄소성 거동과 클래드부의 영향 - vol.26, pp.1, 1999, https://doi.org/10.3795/ksme-a.2002.26.1.039
  7. Tensile and fracture characterization using a simplified digital image correlation test set-up vol.69, pp.4, 1999, https://doi.org/10.12989/sem.2019.69.4.467