Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Modelling of shear deformation and bond slip in reinforced concrete joints

  • Biddah, Ashraf (Department of Civil Engineering, McMaster University) ;
  • Ghobarah, A. (Department of Civil Engineering, McMaster University)
  • Published : 1999.04.25
⟨ Previous Next ⟩

Abstract

A macro-element model is developed to account for shear deformation and bond slip of reinforcement bars in the beam-column joint region of reinforced concrete structures. The joint region is idealized by two springs in series, one representing shear deformation and the other representing bond slip. The softened truss model theory is adopted to establish the shear force-shear deformation relationship and to determine the shear capacity of the joint. A detailed model for the bond slip of the reinforcing bars at the beam-column interface is presented. The proposed macro-element model of the joint is validated using available experimental data on beam-column connections representing exterior joints in ductile and nonductile frames.

Keywords

References

  1. ACI-408 (1979), "Suggestion for development, splices, and standard hook provisions for deformed bars in tension" , American Concrete Institute, Detroit, Michigan.
  2. ACI Committee 352 (1976), "Recommendations for design of beam-column joints in monolithic reinforced concrete structures" , American Concrete Institute, Detroit, Michigan.
  3. Alsiwat, J.M. and Saatcioglu, M. (1992), "Modelling anchorage slip for dynamic analysis", Tenth World Conference on Earthquake Engineering, Madrid, 2627-2632.
  4. Architectural Institute of Japan (AIJ) Guidelines (1988), "Design guidelines for earthquake resistant reinforced concrete buildings based on ultimate strength concept and commentary" , Tokyo, Japan, 337.
  5. Architectural Institute of Japan (AIJ) Standards (1988), "AIJ Standard for structural calculation of reinforced concrete structures" , Tokyo, Japan.
  6. Atrach, O.M. (1992), "Behaviour of interior and exterior beam-column joints under earthquake conditions", M.Sc. Thesis, Department of Civil Engineering, University of Toronto, Canada.
  7. Biddah, A., Ghobarah, A. and Aziz T.S. (1997), "Upgrading of non-ductile reinforced concrete frame connections", Journal of Structural Engineering, ASCE, 123(8), 1001, 1010.
  8. Chung, Y.S., Meyer, C., and Shinozuka, M. (1987), "Seismic damage assessment of reinforced concrete members", Report No. NCEER-87-0022, National Center for Earthquake Engineering Research, State University of New York at Buffalo, NY.
  9. Chung, Y.S., Shinozuka, M. and Meyer, C. (1988), "SARCF User's Guide - Seismic analysis of reinforced concrete frames", Report No. NCEER-88-0044, National Center for Earthquake Engineering Research, State University of New York at Buffalo, NY.
  10. Collins, M.P. (1978), "Towards a rational theory for reinforced concrete members in shear" , Journal of the Structural Division, ASCE, 104, 649-666.
  11. CSA A23.3-94 (1994), "Design of concrete structures", Canadian Standards Association, Rexdale, Ontario, Canada, 209.
  12. Durrani, A.J. and Wight, J.K. (1985), "Behaviour of interior beam-column connections under earthquaketype loading", ACI Structural Journal, 82, 343-349.
  13. Filippou, F.C. (1986), "A Simplified model for reinforcing bar anchorages under cyclic excitations", Journal of the Structural Division, ASCE, 112(ST7), 1639-1659. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:7(1639)
  14. Filippou, F.C., Popov, E.P. and Bertero, V.V. (1986), "Analytical studies of hysteretic behaviour of reinforced concrete joints" , Journal of the Structural Division, ASCE, 112(ST7), 1605-1623. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:7(1605)
  15. Fujii, S. and Morita, S. (1991), "Comparison between interior and exterior reinforced concrete beamcolumn joint behaviour", ACI-SP 123, Design of Beam-Column Joints for Seismic Resistance, Detroit, MI, 145-165.
  16. Ghobarah A, Aziz T.S. and Biddah A. (1996), "Seismic rehabilitation of reinforced concrete beamcolumn connections", Earthquake Spectra, 12(4), 761-780. https://doi.org/10.1193/1.1585909
  17. Hawkins, N.M. and Lin, I.J. (1979), "Bond characteristics of reinforced bars for seismic loading", Third Canadian Conference on Earthquake Engineering, Montreal, Que., II, 1225-1252.
  18. Hsu, T.T.C. (1988), "Softened truss model theory for shear and torsion" , ACI Structural Journal, 85(6), 624-634.
  19. Ichinose, T. (1983), "Methods of inelastic analysis of reinforced concrete frames with bond slip", Transaction of the Architectural Institute of Japan, AIJ, No. 328, 26-35.
  20. Izumo, J. (1992), ''A parametric study of the reinforced concrete panel ductility by using the analytical model", Concrete Shear in Earthquake, Elsevier Science Publishers Ltd., London, UK., 365-374.
  21. Kanaan, A.E. and Powell, G.H. (1973), "DRAIN-2D, A general purpose computer program for dynamic analysis of planner structures" , UBC/EERC report 73-6, University of California, Berkeley, CA
  22. Kaku, T. and Asakusa, H. (1991), "Ductility estimation of exterior beam-column subassemblages in reinforced concrete frames", Design of Beam-Column Joints for Seismic Resistance, ACI-SP 123, Detroit, MI, 167-185.
  23. Kaku T. and Morita, S. (1978), "Bond behaviour of beam bars in the joint of reinforced concrete frame" , Annual Meeting of the Architectural Institute of Japan, AIJ, 1777-1778.
  24. Kitayama, K., Otani, S. and Aoyama, H. (1991), "Development of design criteria for reinforced concrete interior beam-column joints", Design of Beam-Column Joints for Seismic Resistance, ACI-SP 123, Detroit, MI, 97-123.
  25. Kurose, Y. (1987), "Recent studies on reinforced concrete beam-column joints in Japan", PMFSEL Report No. 87-8, Phil M. Ferguson Structural Engineering Laboratory, Department of Civil Engineering, University of Texas at Austin, 163.
  26. Leon, R.T. (1990), "Shear strength and hysteretic behaviour of interior beam-column joints", ACI Structural Journal, 87, 3-11.
  27. Monti G. (1995), "Finite element of reinforced concrete beam-column joints" Proceedings of the Tenth Conference on Engineering Mechanics, University of Colorado, Boulder, Colorado, 887-890.
  28. Morita, S. and Kaku, T. (1972), "Pullout of the beam bar from the joint of reinforced concrete beam-column subassemblages", Annual Meeting of the Architectural Institute of Japan, AIJ, 1099-1100.
  29. Morita, S. and Kaku, T. (1984), "Slippage of reinforcement in beam-column joint of reinforced concrete frame", Eighth World Conf. on Earthquake Engineering, San Francisco, CA, 477-484.
  30. Pantazopoulou, S. and Bonacci, J. (1992), "Consideration of questions about beam-column joints" , ACI Structural Journal, 89(1), 27-36.
  31. Pantazopoulou, S. and Bonacci, J. (1994), "On earthquake-resistant reinforced concrete frame connections" , Canadian Journal of Civil Engineering, 21, 307-328. https://doi.org/10.1139/l94-032
  32. Paulay, T. (1989), "Equilibrium criteria for reinforced concrete beam-column joints" , ACI Structural Journal, 86, 635-643.
  33. Sakata H. and Wada A. (1991), "A study on elasto-plastic behaviour of one-twentieth scale reinforced concrete frames", Sixth Canadian Conference on Earthquake Engineering, Toronto, Ontario, 671-678.
  34. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear" , ACI Structural Journal, 83(2), 219-231.

Cited by

  1. Behavior of FRP-Retrofitted Joints Built with Plain Bars and Low-Strength Concrete vol.15, pp.3, 2011, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000156
  2. Pushover experiment and analysis of a full scale non-seismically detailed RC structure vol.46, 2013, https://doi.org/10.1016/j.engstruct.2012.08.006
  3. Beam-Column Joint Model for Nonlinear Analysis of Non-Seismically Detailed Reinforced Concrete Frame vol.20, pp.3, 2016, https://doi.org/10.1080/13632469.2015.1104759
  4. Energy-Based Hysteresis Model for Reinforced Concrete Beam-Column Connections vol.112, pp.3, 2015, https://doi.org/10.14359/51687404
  5. Analytical assessment and modeling of RC beam-column connections strengthened with CFRP composites vol.42, pp.7, 2011, https://doi.org/10.1016/j.compositesb.2011.07.002
  6. Modified Bouc–Wen model for hysteresis behavior of RC beam–column joints with limited transverse reinforcement vol.46, 2013, https://doi.org/10.1016/j.engstruct.2012.08.003
  7. Influence of pinching effect of exterior joints on the seismic behavior of RC frames vol.6, pp.1, 2014, https://doi.org/10.12989/eas.2014.6.1.089
  8. Modeling of gravity-designed RC sub-assemblages subjected to lateral loads vol.130, 2017, https://doi.org/10.1016/j.engstruct.2016.10.044
  9. Simulation of Reinforced Concrete Frames with Nonductile Beam-Column Joints vol.29, pp.1, 2013, https://doi.org/10.1193/1.4000100
  10. A model for beam–column corner joints of existing RC frame subjected to cyclic loading vol.89, 2015, https://doi.org/10.1016/j.engstruct.2015.01.038
  11. Modeling Beam-Column Joints in Fragility Assessment of Gravity Load Designed Reinforced Concrete Frames vol.12, pp.3, 2008, https://doi.org/10.1080/13632460701457215
  12. On the need for classification criteria for cast in situ RC beam–column joints according to their stiffness vol.49, pp.4, 2016, https://doi.org/10.1617/s11527-015-0577-7
  13. Nonlinear seismic analysis of a super 13-element reinforced concrete beam-column joint model vol.11, pp.5, 2016, https://doi.org/10.12989/eas.2016.11.5.905
  14. Anchorage Models for Reinforced Concrete Beam-Column Joints under Quasi-static Loading vol.113, pp.3, 2016, https://doi.org/10.14359/51688759
  15. Probabilistic model for failure initiation of reinforced concrete interior beam–column connections subjected to seismic loading vol.33, pp.1, 2011, https://doi.org/10.1016/j.engstruct.2010.09.029
  16. Modelling exterior beam-column joints for seismic analysis of RC frame structures vol.37, pp.13, 2008, https://doi.org/10.1002/eqe.826
  17. Analytical investigation on the seismic performance of slabs in RC frame joints vol.67, pp.22, 2015, https://doi.org/10.1680/jmacr.14.00132
  18. Seismic behaviour of infilled and pilotis RC frame structures with beam–column joint degradation effect vol.33, pp.10, 2011, https://doi.org/10.1016/j.engstruct.2011.06.006
  19. Effects of joint flexibility on lateral response of reinforced concrete frames vol.81, 2014, https://doi.org/10.1016/j.engstruct.2014.09.046
  20. Influence of shear deformation of exterior beam-column joints on the quasi-static behavior of RC framed structures vol.12, pp.4, 2013, https://doi.org/10.12989/cac.2013.12.4.393
  21. A proposed model for predicting nonlinear behavior of RC joints under seismic loads vol.95, 2016, https://doi.org/10.1016/j.matdes.2016.01.098
  22. Analytical investigation on the seismic performance of slabs in RC frame joints vol.67, pp.22, 2015, https://doi.org/10.1680/macr.14.00132
  23. A new model to simulate joint shear behavior of poorly detailed beam–column connections in RC structures under seismic loads, Part I: Exterior joints vol.33, pp.3, 2011, https://doi.org/10.1016/j.engstruct.2010.12.026
  24. A numerical model for simulation of RC beam-column connections vol.88, 2015, https://doi.org/10.1016/j.engstruct.2015.01.025
  25. Seismic Response of a Concrete Frame with Weak Beam-Column Joints vol.31, pp.1, 2015, https://doi.org/10.1193/071811EQS179M
  26. Component-based reinforced concrete beam-column joint model vol.18, pp.1, 2017, https://doi.org/10.1002/suco.201600024
  27. Impact of Joint Modeling Approach on Performance Estimates of Older-Type RC Buildings vol.33, pp.3, 2017, https://doi.org/10.1193/092616EQS159M
  28. MODELLING OF RC BEAM-COLUMN JOINTS AND STRUCTURAL WALLS vol.5, pp.1, 2001, https://doi.org/10.1080/13632460109350387
  29. Dynamic analysis of reinforced concrete frames including joint shear deformation vol.21, pp.11, 1999, https://doi.org/10.1016/S0141-0296(98)00052-2
  30. Modeling of cyclic joint shear deformation contributions in RC beam-column connections to overall frame behavior vol.18, pp.5, 2004, https://doi.org/10.12989/sem.2004.18.5.645
  31. Nonlinear modeling of cyclic response of RC beam–column joints reinforced by plain bars vol.16, pp.11, 2018, https://doi.org/10.1007/s10518-018-0399-4
  32. Seismic fragility functions for code compliant and non-compliant RC SMRF structures in Pakistan vol.16, pp.10, 2018, https://doi.org/10.1007/s10518-018-0377-x
  33. Simplified assessment of the need for the explicit model of RC beam-column joints instead of the rigid model pp.14644177, 2019, https://doi.org/10.1002/suco.201800140
  34. Influence of exterior joint effect on the inter-story pounding interaction of structures vol.33, pp.2, 2009, https://doi.org/10.12989/sem.2009.33.2.113
  35. Experimental and analytical investigation on seismic behavior of RC framed structure by pushover method vol.39, pp.1, 1999, https://doi.org/10.12989/sem.2011.39.1.125
  36. Modelling beam-to-column joints in seismic analysis of RC frames vol.12, pp.1, 1999, https://doi.org/10.12989/eas.2017.12.1.119
  37. A practical model for simulating nonlinear behaviour of FRP strengthened RC beam-column joints vol.27, pp.1, 1999, https://doi.org/10.12989/scs.2018.27.1.049
  38. Haunch retrofitting technique for seismic upgrading deficient RC frames vol.17, pp.7, 1999, https://doi.org/10.1007/s10518-019-00638-9
  39. Response Modification Factor of RC Frames Strengthened with RC Haunches vol.2020, pp.None, 1999, https://doi.org/10.1155/2020/3835015
  40. Simplified assessment of the need to use the explicit model of reinforced concrete beam‐column joints instead of the centreline model vol.21, pp.4, 2020, https://doi.org/10.1002/suco.201900063
  41. Cyclic performance of RC beam-column joints with mechanical or forging (GPW) splices; an experimental study vol.28, pp.None, 2020, https://doi.org/10.1016/j.istruc.2020.10.071
  42. Response Modification Factor of Haunch Retrofitted Reinforced Concrete Frames vol.34, pp.6, 1999, https://doi.org/10.1061/(asce)cf.1943-5509.0001525
  43. Non-linear macro modelling of cyclic response of non-seismically detailed reinforced-concrete connections vol.73, pp.2, 1999, https://doi.org/10.1680/jmacr.19.00066
  44. Numerical Study of RC Beam-Column Joints Using a 4-Node Lattice Element Analysis Method vol.25, pp.3, 1999, https://doi.org/10.1007/s12205-021-0991-z
  45. Numerical Simulation on Seismic Behavior of Steel Fiber Reinforced Concrete Beam-Column Joints vol.14, pp.17, 1999, https://doi.org/10.3390/ma14174883
  46. Cyclic Nonlinear Modeling Parameters for Unconfined Beam-Column Joints vol.119, pp.1, 1999, https://doi.org/10.14359/51733139