Structural Engineering and Mechanics

  • 제7권4호
  • /
  • Pages.387-400
  • /
  • 1999
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of excitation type on dynamic system parameters of a reinforced concrete bridge

  • Wahab, M.M. Abdel (Department of Mechanical and Materials Engineering, University of Surrey) ;
  • De Roeck, G. (Department of Civil Engineering, Katholieke Universiteit te Leuven)
  • 발행 : 1999.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Damage detection in civil engineering structures using the change in dynamic system parameters has gained a lot of scientific interest during the last decade. By repeating a dynamic test on a structure after a certain time of use, the change in modal parameters can be used to quantify and qualify damages. To be able to use the modal parameters confidentially for damage evaluation, the effect of other parameters such as excitation type, ambient conditions,... should be considered. In this paper, the influence of excitation type on the dynamic system parameters of a highway prestressed concrete bridge is investigated. The bridge, B13, lies between the villages Vilvoorde and Melsbroek and crosses the highway E19 between Brussels and Antwerpen in Belgium. A drop weight and ambient vibration are used to excite the bridge and the response at selected points is recorded. A finite element model is constructed to support and verify the dynamic measurements. It is found that the difference between the natural frequencies measured using impact weight and ambient vibration is in general less than 1%.

키워드

참고문헌

  1. Adams, R.D., Walton, D. Flitcroft, J.E. and Short, D. (1975), ''Vibration testing as a nondestructive test tool for composite materials", Composite Reliability, ASTM STP 580, 159-175, Philadelphia: American Society for Testing and Materials.
  2. Loland, O. and Dodds, C.J. (1976), "Experiences in developing and operating integrity monitoring system in north sea", Proc. Proceedings of the 8th Annual Offshore Technology conference, 2, 331-3319, OTC paper n 2551.
  3. Vandiver, J.K. (1975), "Detection of structural failure on fixed platforms by measurements of dynamic response", Proceedings of the 7th Annual Offshore Technology Conference 2, 243-252, OTC, paper $n^{\circ}$ 2267.
  4. Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", Journal of Sound and Vibration, 145(2), 312-332.
  5. Nauerz, A. and Fritzen, C.P. (1996), "Error localization using power spectral densities" The 21th International Seminar on Modal Analysis (ISMA 21), Noise and Vibration Engineering. 973-982.
  6. Ahmadian, H., Mottershead, J.E. and Friswell, M.I. (1996), "Damage detection from substructure modes", The 21th International Seminar on Modal Analysis (ISMA 21), Noise and Vibration Engineering, 983-991.
  7. Nake, H.G. and Cemple, C. (1991), "Fault detection and localization in structures: A discussion", Mechanical Systems and Signal Processing, 345-359.
  8. Hajela, P. and Soeiro, F.J. (1990), "Structural damage detection based on static and modal analysis", AIAA Journal, 28(6), 1110-1115, https://doi.org/10.2514/3.25174
  9. Zimmerman, D.C. and Kaouk, M. (1994), "Structural damage detection using a minimum rank updating theory" , Journal of Vibration and Acoustics, 116, 222-231. https://doi.org/10.1115/1.2930416
  10. Friswell, M.I. and Mottershead, J.E. (1995), Finite Element Model Updating in Structural Dynamics, KLUWER Academic Publisher, Dordrechts, The Netherlands.
  11. Pandit, S. (1991), Modal and Spectrum Analysis: Data Dependent System in State Space, John Wiley & Sons.
  12. Pandit, S. and Metha, N.P. (1985), "Data dependent systems approach to modal analysis via state space" , ASME paper $n^{\circ}$ 85 -WA/DSC-1.
  13. De Roeck, G., Abdel Wahab, M. and Claesen, W. (1996), "System identification using the data dependent system method", Version 1.1. Department of Civil Engineering, Katholieke Universiteit te Leuven.
  14. ANSYS, revision 5.3, (1992), Swanson Analysis Systems.
  15. Peeters, B., Abdel Wahab, M., De Roeck, G., De Visscher, J., De Wilde, W.P., Ndambi, J.-M. and Vantomme, J., (1996), "Evaluation of structural damage by system identification", The 21th International Seminar on Modal Analysis (ISMA 21), Noise and Vibration Engineering, 1349-1362.
  16. Allemang, R.J. and Brown, D.L. (1982), "A correlation coefficient for modal vector analysis", 1st International Modal Analysis Conference, Orlando, Florida, 110-116.