DOI QR코드

DOI QR Code

Optimum design of cable-stayed bridges

  • Long, Wenyi (Department of Transportation, Transportation System Information Program, Office of Highway System Engineering) ;
  • Troitsky, Michael S. (Civil Engineering Department, Concordia University) ;
  • Zielinski, Zenon A. (Civil Engineering Department, Concordia University)
  • 발행 : 1999.03.25

초록

This paper presents a procedure to minimize the cost of materials of cable-stayed bridges with composite box girder and concrete tower. Two sets of iterations are included in the proposed procedure. The first set of iteration performs the structural analysis for a cable-stayed bridge. The second set of iteration performs the optimization process. The design is formulated as a general mathematical problem with the cost of the bridge as the objective function and bending forces, shear forces, fatigue stresses, buckling and deflection as constraints. The constraints are developed based on the Canadian National Standard CAN/CSA-S6-88. The finite element method is employed to perform the complicated nonlinear structural analysis of the cable-stayed bridges. The internal penalty function method is used in the optimization process. The limit states design method is used to determine the load capacity of the bridge. A computer program written in FORTRAN 77 is developed and its validity is verified by several practical-sized designs.

키워드

참고문헌

  1. Abendroth, R.E. and Salmon, C.G. (1987), "Sensitivity study of optimum RC restrained end Tsections", Journal of Structural Engineering, ASCE, 112(8), 1928-1943.
  2. Adeli, H. and Chompooming, K. (1988), "Interactive optimization of multispan plate girders", Microcomputer in Civil Engineering, 3(9), 227-244.
  3. Bhatti, M.A, Nasir Raza, S.M. (1985), "Preliminary optimal design of cable-stayed bridges", Engineering Optimization, Great Britain, 8, 265-289. https://doi.org/10.1080/03052158508902493
  4. Bums, S.A. and Ramamurthy S. (1983), "Mathematical programming in structural design", Journal of Structural. Engineering, ASCE, 109(7), 1669-1679. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:7(1669)
  5. Busek, R.H. (1971), "Practical optimization of steel highway bridge beams", Joint Highway Research Project, Purdue University and Indiana State Highway Committee, 5.
  6. Carroll, C.W. (1961), "The created response surface for optimizing nonlinear restrained system", Operations Research, 9(2), 169-184. https://doi.org/10.1287/opre.9.2.169
  7. Cohn, M.Z. and Lounis, Z. (1994), "Optimal design of structural concrete bridge systems", Journal of Structural Engineering, ASCE, 120(9), 2653-2674. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:9(2653)
  8. Design of Highway Bridges, (1988), CAN/CSA-S6-88, A National Standard of Canada.
  9. Ernst, J.H. (1965), "Der E-modul von seilen unter berucksichtigung des durchanges", Der Bauingenieur, 40(2), 52-55, (In German).
  10. Fiacco, A. V. and Mccormick, G.P. (1968), Nonlinear programming, sequential unconstrained minimization techniques, John Wiley Co., New York.
  11. Fletcher, R. and Powell, M.J.D. (1963), "A rapidly convergent descent method for minimization", Computer Journal, 6, 163-168. https://doi.org/10.1093/comjnl/6.2.163
  12. Fox, R.L. (1971), "Unconstrained minimization approaches to constrained problems" , Structural design applications of mathematical programming techniques, Pope, G.G. and Schmit, L.A, eds., AGARDograph No. 149, 55-78.
  13. Gallagher, R.H. and Zienkiewicz, O.C., eds. (1973), Optimum structural design, theory and application, John Wiley & Sons, New York.
  14. Gimsing, N.J. (1983), Cable-stayed bridges, concept and design, John Wiley & Sons, Chichester, New York.
  15. Harrison, H.B. (1973), Computer methods in structural analysis, Prentice Hall, New Jersey.
  16. Ivy, R.J., Lin, T.Y., Mitchell, S., Raab, N.C., Richey, V.J. and Scheffey, C.F. (1954), "Live loading for long-span highway bridges", Transactions ASCE, 119(2708), 981-1004.
  17. Kavlie, D. and Moe, J. (1971), "Automated design of frame structures", Journal of Structural Division., Proc. of the ASCE, 97(1), 33-62.
  18. Kowalik, J. and Osborne, M.R. (1968), Method for unconstrained optimization problems, American Elsevier Publishing Company, Inc., New York.
  19. Lazar, B.E. (1972), "Stiffness analysis of cable-stayed bridges", Journal of Structural Division, Proceeding of the ASCE, 98(7), 1605-1612.
  20. Metwally Abo-Hamd, A.M. (1984), "Optimum design of welded steel columns" , Journal of Structural Engineering, ASCE, 109(11), 2503-2510.
  21. Memari, A.M., West, H.H. and Belegundu, A D. (1991), "Methodology for automation of continuous highway bridge design", Journal of Structural Engineering, ASCE, 117(9), 2584-2599. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:9(2584)
  22. Nakamura S. and Wyatt T.A. (1988), "A parametric study on cable-stayed bridges by limit state design", Structural Eng./Earthquake Eng., JSCE, Japan, 5(10), 265s-273s.
  23. Ohkubo, S., Taniwaki, K. and Yamano, N. (1992), "Optimum design system for steel cable-stayed bridges dealing with shape, sizing variables and cable prestresses" , Microcomputers in Civil Engineering, Elsevier Science Publishers Ltd., 7(3), 201-22l. https://doi.org/10.1111/j.1467-8667.1992.tb00431.x
  24. Powell, M.J.D. (1964), "An efficient method for finding the minimum of a function of several variables without calculating derivatives" , Computer Journal, 7(3), 155-162. https://doi.org/10.1093/comjnl/7.2.155
  25. Rajaraman, K., Loganathan, K. and Raman, N.V. (1980), "Nonlinear analysis of cable-stayed bridges", IABSE Periodical, Zurich, Switzerland, 205-216.
  26. Schmit, L.A. and Farshi, B. (1974), "Some approximation concepts for structural synthesis", AlAA Journal, 12(5), 692-699. https://doi.org/10.2514/3.49321
  27. Standard Specification for Highway Bridges, (1983), 13th edition, American Association of State Highway Transportation Officials (AASHTO), Washington. D.C.
  28. Task Committee on Special Structures for the Committee on Metals of the Structural Division, (1977), "Commentary on the tentative recommendations for cable-stayed bridge structures" , Journal of Structural Division, ASCE, 103(5), 941-959.
  29. Troitsky, M.S. (1988), Cable-stayed bridges, theory and design, second edition, BSP Professional Books, London.
  30. Weaver, W. Jr. and Gere, J.M. (1991), Matrix analysis of framed structures, Van Nostrand Reinhold, New York.

피인용 문헌

  1. Cost optimization of composite beams using genetic algorithms vol.40, pp.11, 2009, https://doi.org/10.1016/j.advengsoft.2009.06.001
  2. Optimum design of concrete cable-stayed bridges with prestressed decks vol.17, pp.5-6, 2016, https://doi.org/10.1080/15502287.2016.1231237
  3. Discrete cost optimization of composite floor system using social harmony search model vol.12, pp.1, 2012, https://doi.org/10.1016/j.asoc.2011.08.035
  4. Optimum design of concrete cable-stayed bridges vol.48, pp.5, 2016, https://doi.org/10.1080/0305215X.2015.1057057
  5. A fuzzy integrated methodology for evaluating conceptual bridge design vol.37, pp.7, 2010, https://doi.org/10.1016/j.eswa.2009.12.024
  6. Optimal topology design of steel–concrete composite structures under stiffness and strength constraints vol.112-113, 2012, https://doi.org/10.1016/j.compstruc.2012.09.007
  7. Application of Micro-GA for optimal cost base isolation design of bridges subject to transient earthquake loads vol.41, pp.5, 2010, https://doi.org/10.1007/s00158-009-0470-5
  8. Optimal design of semi-fan cable-stayed bridges vol.40, pp.3, 2013, https://doi.org/10.1139/cjce-2012-0032
  9. Cost estimation, optimization and competitiveness of different composite floor systems—Part 2: Optimization based competitiveness between the composite I beams, channel-section and hollow-section trusses vol.62, pp.5, 2006, https://doi.org/10.1016/j.jcsr.2005.08.006
  10. Database for the optimum design of semi-fan composite cable-stayed bridges based on genetic algorithms vol.11, pp.8, 2015, https://doi.org/10.1080/15732479.2014.931976
  11. Investigation on Optimization of Cable Tension for Extradosed Cable-Stayed Bridge under the Rational Completion Stage vol.1020, pp.1662-8985, 2014, https://doi.org/10.4028/www.scientific.net/AMR.1020.264
  12. Study on Cable Force Optimization for Extradosed Cable-Stayed Bridge under the Rational Completion Stage vol.501-504, pp.1662-7482, 2014, https://doi.org/10.4028/www.scientific.net/AMM.501-504.1170
  13. Cost optimization of composite floor trusses vol.6, pp.5, 2006, https://doi.org/10.12989/scs.2006.6.5.435
  14. Оperational state of Myanmar cable-stayed bridge structures vol.6, pp.4, 1999, https://doi.org/10.15862/23sats419
  15. Optimization of cable-stayed bridges: A literature survey vol.149, pp.None, 1999, https://doi.org/10.1016/j.advengsoft.2020.102829