DOI QR코드

DOI QR Code

Sensitivity and optimisation procedures for truss structures under large displacement

  • Bothma, A.S. (Department of Mathematics and Applied Mathematics, University of Cape Town) ;
  • Ronda, J. (Department of Mathematics and Applied Mathematics, University of Cape Town) ;
  • Kleiber, M. (Institute of Fundamental Technological Research, Polish Academy of Sciences)
  • 발행 : 1999.01.25

초록

The work presented here focuses on the development of suitable discretised formulations, for large-displacement shape and non-shape design sensitivity analysis (DSA), which enable the straightforward incorporation of structural optimisation into established finite element analysis (FEA) codes. For the generalised displacement-based functional the design sensitivity vector has been expressed in terms of displacement sensitivity. The Total Lagrangian formulation is utilised for modelling of large deformation of truss structures. The variational formulation of the sensitivity analysis procedure is discretised by using "pseudo" - finite elements, Results are presented for the sensitivity analysis and optimisation of standard truss structures. For the purposes of this work, the analysis and optimisation procedures outlined below are incorporated into the FEA code ABAQUS.

키워드

참고문헌

  1. Arora, J.S. and Cardosa, J.E.B. (1989), "A design sensitivity analysis principle and its implementation into ADINA", Computers and Structures, 32(3/4), 691-705. https://doi.org/10.1016/0045-7949(89)90357-X
  2. Belegundu, A.D. and Arora, J.S. (1985), "A study of mathematical programming methods for structural optimisation-Part 1: Theory", Int'l Journal for Num. Methods in Eng., 21, 1583-1599. https://doi.org/10.1002/nme.1620210904
  3. Bothma, A.S. (1996), "A computational implementation of design sensitivity analysis and structural optimisation" , MSc. Thesis, University of Cape Town.
  4. Haririan, M., Cardosa, J.B. and Arora, J.S. (1987), "Use of ADINA for design optimisation of nonlinear structures" , Computers and Structures, 26(1/2), pp. 123-133. https://doi.org/10.1016/0045-7949(87)90242-2
  5. Kleiber, M., Hien, T.D. and Postek, E. (1994), "Incremental finite element sensitivity analysis for nonlinear mechanics applications" , Int'l Journal for Num. Meth. in Eng., 37, 3291-3308. https://doi.org/10.1002/nme.1620371906
  6. Kleiber, M. (1993), "Shape and non-shape structural sensitivity analysis for problems with any material and kinematic nonlinearity", Computer Methods in Applied Mechanics and Eng., 108, 73-97. https://doi.org/10.1016/0045-7825(93)90154-P
  7. Lim, O.K. and Arora, J.S. (1986), "An active set RQP algorithm for engineering design optimisation" , Computer Methods in Applied Mechanics and Engineering, 57, 51-65. https://doi.org/10.1016/0045-7825(86)90070-8
  8. Mroz, Z. (1994), ''Variational methods in sensitivity and optimal design", European Journals of Mechanics - A/Solids, 13(4-supplement), 115-147.
  9. Thanedar, P.J., Arora, J.S., Tseng, C.H., Lim, O.K. and Park, G.J. (1986), "Performance of some SQP algorithms on structural design problems" , Int'l Journal for Num. Meth. in Eng., 23, 2187-2203. https://doi.org/10.1002/nme.1620231204
  10. Tsay, J.J. and Arora, J.S. (1990), "Nonlinear structural design sensitivity analysis for path-dependent problems. Part 1: General theory" , Computer Methods in Applied Mechanics and Eng., 81, 183-208. https://doi.org/10.1016/0045-7825(90)90109-Y