DOI QR코드

DOI QR Code

용접 띠철근 보강된 콘크리트 기둥의 역학적 거동에 관한 실험적 연구

An Experimental Study on the Structural Behavior of Concrete Columns Confined with Welded Reinforcement Grids

  • 발행 : 1999.04.01

초록

지진다발 지역에서는 철근콘크리트 기둥의 단면을 합리적으로 구속함과 동시에 횡보강 띠철근의 세심한 배근등이 요구된다. 이러한 요구조건을 만족시키기 위한 보편적인 횡보강근 사용의 문제점으로는 높은 체적비(high volumetric ratio), 조밀한 간격(close spacings), 겹침(overlapping of hoops), 구부림(bends), 구부림 연장 (bend extensions), 시공상의 어려움과 콘크리트 타설상의 문제 등이다. 이러한 문제점을 해결하기 위한 한 방법으로는 요구되는 횡보강근의 체적비, 배역, 크기 등에 따라 이를 기조립, 용접하여 사용하는 것이다. 용접된 횡보강근의 사용은 겹침과 구부림, 구부림의 연장 등이 필요하지 않기 때문에 조립이 간편하고, 축방향 철근의 지지에 적합한 치수의 정확성과 재료를 절감시킬 수 있다. 더우기, 단면 내 횡보강 철근의 간격이 조밀해짐으로써, 코아 콘크리트 주변의 구속력을 균등히 분배시키게 되고, 이에 따라 코아 콘크리트의 거동을 향상시키는 결과를 얻을 수가 있다. 이에 본 연구에서는 이러한 용접 띠철근으로 보강된 철근콘크리트 기둥의 역학적 거동을 실험적으로 규명함과 동시에 철근콘크리트 기둥의 내진성능 향상을 위한 기초자료를 제공하고자 하였다. 그 결과 횡보강근의 강도와 연성에 영향을 미치지 않도록 용접됨과 동시에 충분한 신률을 가진다면, 용접된 격자형 횡보강근은 기둥의 띠철근으로써 사용가능한 것으로 판단된다. 특히, 용접된 격자형 횡보강근이 유효하게 거동하기 위하여는 1) 용접된 접합부위의 강도가 보강근의 모재강도 이상 2) 신률이 4% 이상이어야 할 필요가 있다.

An experimental investigation was conducted to study the structural behavior of concrete columns confined with welded grids. The full-scale columns with different volumetric ratio, spacing and arrangement of welded reinforcement grids were tested under simulated seismic loading. The columns were subjected to constant axial compression of approximately 20% or 40% of their capacities accompanied by incrementally increasing lateral deformation reversals. The results indicate that the welded reinforcement grid can be used effectively as confinement reinforcement provided that the steel used, have sufficient ductility and the welding process employed does not alter the strength and elongation characteristics of steel. The grids improved the structural performance of columns, which developed lateral drift ratios in excess of 3% with the spacing and volumetric ratio of transverse reinforcement similar to those required by the ACI 318-95 Building Code. Drift capacity further increased when grids with larger number of cells were used. Furthermore, the use of grids reduced congesting of reinforcement while the dimensional accuracy provided perfect support to longitudinal reinforcement.

키워드

참고문헌

  1. Building Code Requirements for Reinforced Concrete and Commentary (ACI 318-95) ACI Committee 318
  2. Design of Concrete Structures for Buildings(CAN3-A23.2-94) CSA
  3. Research Report. Dept. of Civil Eng. Behavior of Reinforced Concrete Columns Confined with Welded Wire Fabric and/or Rectilinear Ties Razvi, S. R.;Saatcioglu, M.
  4. Research Report, Earthquake Engineering Research Center Cyclic Behavior of Shear Wall Boundary Elements Incorporating Prefabricated Welded Wire Hoops Miranda, E.;Thompson, C. L.;Bertero, V.V.
  5. Research Report NISTIR 5436 Performance of 1/3-Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic Loads-Report No.4 Cheok, G. S.;Stone, W. C.
  6. Research Report OCEERC 96-05, Engineering Research Center. Dept. of Civil Eng. Concrete Columns Confined with Welded Reinforcement Grids Grira M.;Saatcioglu, M.
  7. 한국콘크리트학회 학술발표 논문집 v.9 no.1 용접된 띠철근으로 보강한 철근콘크리트 기둥의 강도와 연성 최창식;Grira, M.;Saatcioglu, M.
  8. 한국콘크리트학회 학술발표 논문집 v.9 no.2 용접된 띠철근으로 보강한 철근콘크리트 기둥의 강도와 연성(Ⅱ) 최창식;Grira, M.;Saatcioglu, M.
  9. Jour. of Structural Engineering v.118 no.9 Reinforcement Achorage Slip under Monotonic Loading Alsiwat, J.;Saatcioglu, M.
  10. ACI Structural Journal v.86 no.1 Response of Reinforced Concrete Columns to Simulated Seismic Loading Saatcioglu, M.;Ozcebe, G.
  11. Jour. of Structural Engineering v.118 no.6 Strength and Ductility of Confined Concrete Saatcioglu, M.;Razvi, S.
  12. ASCE Jour. of Structural Engineering v.121 no.11 Confined Columns under Eccentric Loading Saatcioglu, M.;Salamat, A. H.;Razvi, S. R.