Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지

The Compressive Deformation Behavior of Nanocrystalline Al-5at.%Ti Alloy Prepared by Mechanical Alloying at Low Temperature

저온 기계적 합금화한 nanocrystalline Al-5at.%Ti 합금의 압축변형거동

  • Published : 1999.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Mechanical properties of nanocrystalline Al-5at.%Ti alloy were investigated through high temperature compression test. Al-5at.%Ti nanocrystalline metal powders, which had finer and more equiaxed shape than those produced at room temperature, were produced by mechanical alloying at low temperature. The powders were successfully consolidated to 99fo of theoretical density by vacuum hot pressing. XRD and TEM analysis revealed that $Al_3Ti$ intermetallic compounds formed inside powders and pure Al region with coarse grains formed between powders, especially at triple junction. Mechanical properties in terms of hardness and strength were improved by grain size refinement, but ductility decreased presumably due to the formation of the weak interfaces between Al pool and powders.

Keywords

References

  1. in Dispersion Strengthened Aluminium Alloys W.E.Franzier;M.J.Koczak;Y.W.Kim(ed);W.M.Griffith(ed.)
  2. Scripta Met. v.29 S.H.Wang;P.W.Kao;C.P.Chang
  3. Nature v.330 J.Karec(et al.)
  4. Mat. Res. Soc. Symp. Proc v.362 R.W.Siegel;G.E.Fougere
  5. Actamater v.45 P.G.Sanders;J.A.Eastman;J.R.Weertman
  6. Nanostructured Materials v.5 G.Liang;Q.Meng;Z.Li;E.Wang
  7. J. of Korean Powder Metallurgy Institute v.3 C.Suryanarayana
  8. Nanostructured Materials v.3 R.W.Siegel
  9. Metals and Materials v.2 C.Suryanarayana
  10. Nanostructured Materials v.2 R.D.Shull
  11. Mat. Sci. Eng. v.72 H.Hallen
  12. Mat. Sci. Eng. v.55 Y.Bergstrom;H.Hallen
  13. Nanostructured Materials v.8 J.Xu;J.S.Yin;E.Ma
  14. 한국과학재단 보고서(MA 방법에 의한 Nanocrystalline Al-Ti 합급 개발 연구), KOSEF 95-0030-09-01-3 이경섭;김선진;강성군
  15. Metals Handbook Ninth Edition v.12 ASM
  16. Defect and Diffusion Forum v.59 Birringer,R.;Hahn,H.;H.fler,H.;Karch,J.;Gleiter,H.
  17. Metallurgical Transactions v.5 J.S.Benjamin;T.E.Volin