Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지

A Six-Degree-of-Freedom Force-Reflecting Master Hand Controller using Fivebar Parallel Mechanism

5각 관절 병렬 구조를 이용한 6자유도 힘 반사형 마스터 콘트롤러

  • Published : 1999.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

A force-reflecting hand controller can provide the kinesthetic information obtained from a slave manipulator to the operator of a teleoperation system. The goal is to construct a compact hand controller that can provide large workspace and good force-reflecting capability. This paper presents the design and the analysis of a 6-degree-of-freedom force-reflecting hand controller using fivebar parallel mechanism. The forward kinematics of the fivebar parallel mechanism has been calculated in real-time using three pin-joint sensors in addition to six actuator position sensors. A force decomposition approach is used to compute the Jacobian. To evaluate the characteristics of the fivebar parallel mechanism, it has been compared with the other three parallel mechanisms in terms with workspace and manipulability measure. The hand controller using the fivebar parallel mechanism has been constructed and tested to verify the feasibility of the design concept.

Keywords

References

  1. Advanced in Computer Technology v.1 Kinematic coupling between operator and remote manipulator A.Bejczy;K.Salisbury
  2. Journal of Robotics and Mechatronics v.2 no.6 The development of a direct drive master arm T.Kotoku;E.Husler;K.Tanie;A.Fujikawa
  3. Company brochure Cybernet System Co.
  4. ASME Winter Annual Meeting v.DSC-55-1 The PHANToM haptic interface: a device for probing virtual objects T.Massi;K.Salisbury
  5. Proc. ISRR. Robotics Research 3 Parallel manipulator H.Inoue(et al.)
  6. In Proc. of the Int. Symposium on Teleoperaton and Control Development of a general purpose hand controller for advanced teleoperation K.V.Siva(et al.)
  7. Proc. of the IEEE Int. Conf. on Robotics and Automation Design of a four-dof force-reflecting manipulandum with a specified force/torque workspace P.A.Millman;J.E.Colgate
  8. Proc. IEEE Int. Conf. Ro-botics and Automation A pantograph linkage parallel platform master hand controller for force-reflection Gregroy L.Long;Curtis L.Collins
  9. IEEE Int. Conf. on Robotics and Automation A new analytical system applying 6 DOF parallel link manipulator for evaluating motion sensation N.Mimura;Y.Funabashi
  10. IEEE J. of Robotics and Automation v.4 no.5 Kinematic analysis for a six-degree-of freedom 3-PRPS parallel mechanism F.Behi
  11. The International Journal of Robotics Research v.13 no.2 On the forward kinematics of parallel manipulator R.Nair;J.H.Maddocks
  12. Foundations of Robotics/Analysis and Control T.Yoshikawa
  13. Proc. IEEE Int. Conf. on Robotics and Automation Jacobian formulation for a novel 6-DOF parallel manipulator K.Cleary;M.Uebel
  14. Trans. ASME Journal of Mechanical Design v.118 Working capability analysis of stewart platforms C.M.Luh;F.A.Adikins;E.J.Haug;C.C.Qiu
  15. Control of Systems v.DSC-33 Modeling and control of a stewart platform manipulator K.Liu;M.Fitzgerald;D.Dawson
  16. Int. J. of Robotics Research v.45 no.2 A stewart platform-based manipulator : General theory and practical construction E.F.Fichter
  17. Int. J. Robotics Research v.4 no.2 Manipulability of robotic mechanisms T.Yoshikawa