미세극성 유체 유동장에 놓여진 쐐기형 물체주위의 열경계층에 관한 연구

A Study on the Thermal Boundary Layer Flow of a Micropolar Fluid in the Vicinity of a Wedge

  • 발행 : 1999.06.01

초록

일정한 표면 온도를 갖는 쐐기형 물체 주위를 지나는 미세 극성유체의 정상상태 층류유동에 대하여 고찰하였다. Falkner & Skan에 의하여 유도된 상사해법을 이용하여 유동방향의 비선형 경계층 방정식의 해를 구하였다. 4계 Runge-Kutta법을 사용하여 Pr 수가 1일 경우의 열전달 특성을 수치적으로 해석하였고, 물질 매개변수에 대한 영향을 고찰하였다. 경계층을 가로지르는 무차원 속도와 Nusselt 수의 분포는 쐐기형 물체 주위를 지나는 Newtonian 유체의 경우와 비교하였다. Pr 수가 1이고 일정한 쐐기각을 가질 경우 물질 매개변수 K값이 증가할수록 Newtonian 유체의 경우보다 미세 극성유체의 경우 경계층의 두께가 증가하는 결과를 보였다. 그러나 물질매개변수 K값이 일정할 경우, Newtonian 유체보다 미세 극성유체의 열전달율이 더 작은 경향을 나타내었다.

The characteristics of thermal boundary layer flow of a micropolar fluid in the vicinity of a wedge has been studied with constant surface temperature. The similarity variables found by Falkner and Skan are employed to reduce the streamwise-dependence in the coupled nonlinear boundary layer equations. Numerical solutions are presented for the heat transfer characteristics with Pr=1 using the fourth-order Runge-Kutta method and their dependence on the material parameters is discussed. The distributions of dimensionless temperature and Nusselt number across the boundary layer are compared with the corresponding flow problems for a Newtonian fluid over wedges. Numerical results show that for a constant wedge angle with a given Prandtl number, Pr=1, the effect of increasing values of K results in an increasing thermal boundary thickness for a micropolar fluid, as compared with a Newtonian fluid. For the case of the constant material parameter K, however, the heat transfer rate for a micropolar fluid is lower than that of a Newtonian fluid.

키워드

참고문헌

  1. J. Math. Mech. v.16 no.1 A.C.Eringen
  2. J. Math. Analysis Applic. v.38 A.C.Eringen
  3. J. Heat Transfer v.102 R.F.Bergolz;J.Heat Transfer
  4. J. Heat Transfer v.102 A.A.Emara;F.A.Kulacki
  5. Can. J. Chem. Engng v.62 B.Chanadra Shekar;P.Vasseur;L.Robillard;T.H.Nguyen
  6. J. Biomech. v.4 T.Ariman
  7. Int. J. Engng Sci. v.34 no.1 D.A.S.Rees;A.P.Bassom
  8. Rheol. Acta v.10 Y.Kazakia;T.Ariman
  9. Int. J. Engng Sci. v.18 R.S.R.Gorla
  10. Int. J. Engng Sci. v.22 R.S.R.Gorla
  11. Int. J. Engng Sci. v.30 no.3 R.S.R.Gorla
  12. ZAMM v.61 K.Unsworth;T.C.Chiam
  13. Int. J. Engng Sci. v.14 G.Ahmadi
  14. Phil. Mag. v.12 no.7 A.C.Falkner;S.W.Skan
  15. "Viscous Fluid Flow", 2nd ed. F.M.White
  16. Nature v.212 G.E.Gadd