초록
본 연구에서는 다단계 굴착시 연성토류 벽체의 수평변형, 굴착단계별 토압변화 및 분포, 그리고 배면지반의 지표침하와 지중변위의 분포를 규명하기 위하여 벽체강성, 벽마찰의 유무 및 지반조건에 대하여 굴착모형실험을 실시하였다. 모형실험 결과 벽체강성 및 벽체와 배면지반의 벽마찰각에 유무에 따른 지표침하 형태는 다소 차이를 나타내었으며, 지중변위 결과는 최대지중변위의 발생심도는 심도비 0.1H에서 0.15H(H는 최종굴착심도)의 범위에서 나타났다. 그리고 벽체의 강성에 따라 배면지반의 토압재분배 현상인 아칭효과는 벽체강성과 지반조건에 직접적인 관계가 있음을 확인할 수 있었다. 모형실험에서 얻은 벽체변위 및 토압분포는 기존 탄소성보법 프로그램으로 또한 지표침하 및 지중변위는 본 연구진에 의해 개발된 GDHM 재료모델을 이용한 유한요소법 프로그램으로 각각 비교분석하였다. 기존 탄소성보법 프로그램을 이용하여 모형실험을 해석한 결과 벽체변위 및 토압분포는 모형실험 결과와 상이한 결과를 얻었으며, GDHM 재료모델을 적용한 유한요소해석에서는 벽체수평변위의 형태는 다소 상이한 결과를 얻었으나 배면지반의 지중변위 분포는 벽체강성에 따라서 유사한 결과를 얻었다.
Model tests on propped retaining walls were performed for the investigation of wall displacement, distribution of earth pressure, surface settlement and underground movement at various excavation stage in sand. The result of model tests on the trough of surface settlement showed considerable difference depending on the characteristic of wall stiffness, wall friction and soil condition. The location of maximum underground movement were found to be at range of 0.15H to 0. 1H(H: Final excavation depth). Effect of arching by the redistribution of earth pressure were closely related to the stiffness of wall as well as the soil condition. The wall displacement and earth pressure distribution were simulated by elasto - plastic beam analysis program and finite element method with GDHM model respectively. The result of elasto-plastic analysis showed some discrepancy on the wall displacement and earth pressure, but result of underground movement by FEM with various wall stiffness were in good agreement with the model tests.