한국재료학회지 (Korean Journal of Materials Research)

  • 제9권7호
  • /
  • Pages.695-700
  • /
  • 1999
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지

7050 Al합금의 응력부식저항성에 미치는 2단 시효처리의 영향

Effect of Two-Step Aging Treatment on the Stress Corossion Cracking Resistance of 7050 Al Alloy

  • Choe, Jung-Hwan (Dept.of Metallurgical Engineering, Busan National University) ;
  • Kim, Jong-Gi (Hyundai Mortor) ;
  • Kim, Heon-Gyu (Dept.of Metallurgical Engineering, Busan National University) ;
  • Lee, Sang-Rae (Dept.of Metallurgical Engineering, Busan National University) ;
  • Kim, In-Bae (Dept.of Metallurgical Engineering, Busan National University)
  • 발행 : 1999.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

7050 Al합금의 응력부식저항성에 미치는 2단 시효처리의 영향을 미세조직관찰, 전기전도도시험 및 SCF값을 평가함으로써 조사하였다. 최대 경도 이상 과시효에 의해 주 강화상인 η'상이 η상으로 변태되었고, 입내 및 입계에 존재하는 η상의 크기와 간격이 커졌으며 그 결과 응력부식저항성이 증대되었다. 2차 시효시간의 증가에 따라 전기전도도값은 증가되었으나 항복강도의 감소로 인하여 SCF값은 감소되었는데, 이러한 결과는 응력부식저항성의 증가를 의미한다. AMS 4107규격을 기준으로 하였을 때 7050 Al합금 단조재의 적정시효조건은 1차시효가 12$0^{\circ}C$에서 6시간, 2차시효는 $175^{\circ}C$에서 12시간이었다.

Effects of two-step aging treatment on the stress corrosion cracking(SCC) resistance of 7050 Al alloy were investigated by transmission electron microscopy, electrical conductivity measurement and stress corrosion facter(SCF) evaluation. It was found that η', principal hardening phase, transformed to η during over aging above maximum hardness, and SCC resistance was improved by increasing of the size and interspacing of η particles in matrix and grain boundary. The electrical conductivity increased with aging time, but SCF decreased due to the decrease of yield strength. This results mean increase of SCC resistance The optimum two-step aging condition in forged 7050 Al alloy was to be first aged at $120^{\circ}C$ for 6h and then finally aged at $175^{\circ}C$ for 12h.

키워드

참고문헌

  1. Light Alloys Metallurgy of the Light Metals(3rd edition) v.338 Arnold, a division of Hodder Headline PLC I.J. Polmear
  2. 열처리학회지 v.9 no.2 이효수;남태윤;이병권
  3. Metal. Trans. v.1 W. F. Smith;N.J. Grant
  4. Metal. Trans. v.A no.26 R. C. Dorward;D.J. Beerntsen
  5. MIL-H-6088G Heat Treatment of Aluminum Alloy
  6. Corrosion v.31 P. Doig;J.W. Edington
  7. U.S. Patent 3856584 B.M. Cina
  8. Z. Metalkde v.170 A. Aran
  9. Advance in Corrosion Science and Technology v.2 Stress Corrosion Cracking of High Strength Alumi-num Alloy M. O. Speidel;M.V. Hyatt;M.G. Fontana(et al.)(ed.)
  10. Corrosion v.26 Comparison of Fracture Mechanics and Nominal Str-ess Analyses in Stress Corrosion Cracking S.R. Novak;S. T. Rolfe
  11. Aluminum Properties and Physical Metallurgy J. E. Hatch
  12. Met. Trans. v.6A no.4 M. O. Speidel
  13. Metal. Trans. v.1 A.J. DE Ardo, JR;R.D.Townsend
  14. Met. Trans. v.4 no.10 J.A. Green;D.L. Novak
  15. Met. Trans. v.5 no.6 P.K. Poulose;J.E. Morral;A.J. McEvily
  16. Can. Aeronaut. Space J. v.27 J.C. Beddoes;M.C. Demalherbe
  17. Metal Progress v.27 R.A. Chihoski
  18. Metals Technology v.11 M. U. Islam;W. Wallace