레이저 표면처리된 Nickel-Base 합금의 공식 저항성 연구

A Study on the Pitting Corrosion Resistance of Laser Surface Treated Nickel-Base Alloy

  • 발행 : 1999.02.01

초록

The effect on the pitting corrosion resistance of laser welding and surface treatment developed as a repair method of stream generator tubing material that was a major component of primary system at nuclear power plant was observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface melted and the microstructural characteristics were examined. The pitting corrosion resistance was examined through Ep(pitting potential) and degree of pit generation by means of the electrochemical tests and the immersion tests respectively. The pit formation characteristics were investigated through microstructural changes and the pit initiation site and pit morphology. The test results showed that the pitting corrosion resistances was increased in the order of the followings; sensitized Alloy 600, solution annealed alloy600, and laser surface melted Alloy 600. Pits were initiated preferably at Ti-containing inclusions and their surroundings in all tested specimens and it is believed that higher pitting resistance of laser-surface treated Alloy 600 was caused by fine, homogeneous distribution of non-soluble inclusions, the disappearance of grain boundary, and the formation of dense, stable oxide film. The major element of corrosion products filled in the pit was Cr. On the other hand, Fe was enriched in the deposit formed on the pit.

키워드

참고문헌

  1. Corrosion in Power Generating Equipment Corrosion in Steam Generating Systems Theus,G.J.;P.L.Daniel;M.O.Speidel(ed.);A.Atrens(ed.)
  2. EPRI, RP3580-06, P.A-238 EPRI
  3. Proc. of the Int. Cong. on Metallic Corrosion v.1 Angwin.M.J.
  4. Paper 86-JPGC-NE-4 Presented at the Joint ASME/IEEE Power Generation Conference Laskowski,L.J.;M.J.B.Hudson
  5. KAERI/RR-1521/94 김정수(등)
  6. Proc. of Eighth Int. Symp. on Environmental Degradation of Materials in Nuclear Power System-Water Reactors v.1 J.S.Kim(et al.)
  7. Pitting Corrosion of Metals Z.Szklarska-Smialowska
  8. Nuclear Technology v.5 M.W.Kendig;H.S.Isaacs
  9. Corrosion v.29 no.1 T.Suzuki;M.Yamabe;T.Kitamura
  10. Corrosion v.36 no.6 R.L.Smamakian;A.R.Troiano;R.F.Hehemann
  11. Corrosion v.37 no.11 L.F.Lin;G.Cragnolino;Z.Szklarska-Smialowska;D.D.Macdonald
  12. Acta Metall. v.1 W.A.Tiller;J.W.Rutter;K.A.Jackson;B.Chalmers
  13. Mater. Sci. and Engin. v.A134 J.M.Pelletier;L.Renaud;F.Fouquet
  14. Handbook of Stainless Steels C.J.Novak
  15. 박사학위논문 허도행
  16. Corrosion Sci. v.27 P.Marcus;H.Talah
  17. Trsans. of the Japan Welding Soc. v.24 no.1 Y.NaKao;N.Nishimoto;W.P.Zhang
  18. KAERI/RR-1759/96 김우철(등)
  19. EPRI NP-3137 v.1 C.M.Chen;K.Aral;G.J.Theus