Spray Characteristics of High-Pressure Injector in Direct-Injection Gasoline Engine

직분식 가솔린 기관 고압 인젝터의 연료 무화 특성

  • Published : 1999.11.01

Abstract

An experimental study was carried out to investigate the global spray behavior and spray characteristics of high-pressure fuel injector in the direct-injection goasoline enginet. The atomization characteristics of fuel spary such as mean droplet size, mean velocity , and velocity distribution were measured by the phase Doppler particle analyzer. The spray tip penetration and spray width were investigated by the result fo visualizaiton experiment. The quantitiative spary characteristics of injector spray were measured under various sparay conditions and ambient pressures. The results of experiment show that the increase in ambient pressure have influence on the spray tip penetration and spray development process. Also, the influence of injection pressure and measuring location on the mean velocity and droplet size distribution were discussed.

Keywords

References

  1. SAE Paper 950506 The Spray Characteristics of Automotive Port Fuel Injection - A Critical Review F. Q. Zhao;Lai, M. C. Lai;D. L. Harrington
  2. SAE Paper 970627 A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines F. Q. Zhao;M. C. Lai;D. L. Harrington
  3. The 3th Conference of ILASS-Asia A Study on the Spray Structure of High Pressure Gasoline Injection C. S. Lee;K. H. Lee;M. S. Chon;Y. H. Kim;J. S. Park;H. N. Cho
  4. SAE Technical pager No. 962015 Fuel Preparation requirements for direct-injection spark ignition Engine L. G. Dodge
  5. SAE paper 970514 Development of Gasoline direct. Injection Engine Y. Iwamoto;K. Noma;O. Nakayama;T. Yamaguchi;H. Ando
  6. SAE Technical paper, 940398 Initial comparisons of Computed and Measured Hollow-cone Sprays in an Engine C. F. Lee;F. V. Bracco
  7. SAE Paper 961925 Spray Dyamics of High Pressure Fuel Injectors for DI Gasoline Engines F. Q. Zhao;J. H. Yoo;Y. Liu;M. C. Lai
  8. Combustion modeling in Reciprocating Engines N. Mattavi;James, Charles;A. Amann
  9. Atomization and sprays v.2 Interpreting mean Drop diameters using Distribution Moments W. A. Sowa
  10. Atomization and Sprays A. H. Lefebvre