GFRP 복합재료의 층간파괴인성치에 관한 연구

A Study on the Interlaminar Fracture Toughness of Glass Fiber Reinforced Plastic Comosites

  • 발행 : 1999.11.01

초록

The value of the mode I interlamina fracture toughness, GIC, is calculated by experimental compliance method, modified compliance method and beam theory. The value of the mode II interlamina fracture toughness, GIC, is evaluated by beam method, theory beam theory and compliance method. This paper describes the effect of load pint displacement rate and speicimen geometries for mode I and II interlaminar fracture toughness of glass fiber reinforced plastic composites by using double cantilever beam (DCB) and end notched flexure (ENF) specimen. For the load point displacement rate of increases whereas the value of 2,6 and 10 mm/min the value of GIC decrease as load point displacement rate increases whereas the value of GIC is found to be no significant effect. The value of GIC decreases as initial crack length increases. The fractured surface of the DCB and ENF samples are examined by scanning electron microscopy (SEM).

키워드

참고문헌

  1. J. Mat. Sci. v.29 Effect of particles on interlaminar crack growth in crossplied carbon-fibre/epoxy laminates Srivastava, S.K;Harris, B.
  2. J. Reinf. Plast. Comp. v.5 Mode Ⅱ Interlaminar Fracture of Gra-phite/Epoxy and Graphite/PEEK Carlsson, L.A.;Gillespie Jr, J.W.;Trethewey, B.R.
  3. Comp. Sci. and Tech. v.39 Measurement of GIC and $G_{IIC}$ in Carbon/Epoxy Composites Davies, P.;Moulin, C.;Kausch, H.H.;Fischer, M.
  4. J. Mat. Sci. v.29 Interlaminar fracture of carbon-thermo-plastic polyimide composites Zhou, Jiang.;He, Tianbai.;Zhang, Jin.;Ding, Mengxian.
  5. Trans. JSME(A) v.60 no.573 Evaluation of Fiber-Bridging Effect on Model Ⅰ Interlaminar Fracture Toughness of Unidirectional CFRP Based on Measurements of Crack Opening Profiles Keisuke, T.;Hiroshi, T.;Kenjiro, Y.
  6. J. Mat. Sci. Letter v.15 Loading rate effects in the mode Ⅱ fracture of carbon fiber poly-ether-ether-ketone composites Cantwell, W.J.
  7. J. Com. Mat. v.20 On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode Ⅱ Testing Carlsson, L.A.;Gillespie Jr, J.W.;Pipes, R.B.
  8. J. Com. Mat. v.15 The Interlaminar Frac-ture Energy of Glass Fiber Reinforced Polyester Composites Han;Koutsky, J.
  9. ASTM STP 876 Effects of Strain Rate on Delamination Fracture Toughness of Graphite/Epoxy Aliyu, A.A.;Daniel, I.M.
  10. J. Com. Mat. v.21 Loading Rate Effect on Interlaminar Fracture Toughness of a Thermoplastic Composite Mall, S.;Law, G.E.;Katouzian, M.
  11. J. Mat. Sci. v.28 Fracture behaviour of model toughened composites under Mode Ⅰ and Mode Ⅱ delaminations Sue, H.J.;Jones, R.E.;Garcia-Meitin, E.I.
  12. J. Mat. Sci. Letter v.9 Delamination from thin starter films in carbon fibre/PEEK composites Davies, P.;Cantwell, W.J.;Kausch, H.H.
  13. 한국복합재료학회지 v.7 no.4 CFRP 복합재료의 모드 Ⅰ 층간파괴 인성치에 관한 연구 김형진;엄윤성;고성위
  14. 한국복합재료학회지 v.8 no.4 CFRP 복합재료의 모드 Ⅱ 층간파괴 인성치에 관한 연구 김형진;엄윤성;김엄기;고성위
  15. 한국해양공학회지 v.9 no.2 층간파괴인성치에 대한 섬유방향에 관한 연구 이정규;엄윤성;김형진;고성위
  16. J. Soc. Mat. Sci. Japan v.41 Effect of Fiber Orientation on the Mode Ⅰ Interlaminar Fracture Behowior of CF/Epoxy Laminates Chou, I.;Kimpara, I.;Kageyama, k.;Ohsawa, I.
  17. 한국복합재료학회지 v.6 no.2 온도변화에 따른 실리카 입자강화 복합재료의 기계적 성질 및 파괴기동 고성위
  18. 대한기계학회논문집(A) v.20 no.4 불균질 취성재료 파괴인성에 미치는 두께효과의 확률적 연구 김엄기;고성위;정규동
  19. ASTM STP Moisture and Temperature Effects on the Mixed Delamination Fracture of Unidirectional Graphite/Epoxy Russell, A.J.;Street, K.N.
  20. Comp. Sci. Tech. v.38 Measurement of $G_{IC}$ and $G_{IIC}$ in Carbon/Epoxy Composites Davies, P.;Moulin, C.;Kausch, H.H.;Fisher, M.M.