Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

Reheating of Semi-Solid Aluminum Alloys and Mechanical Properties of Thixoforged Product

반용융 알루미늄 합금의 재가열 및 Thixoforging 부품의 기계적 성질

  • Published : 1999.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The reheating of the billet in the semi-solid state as quickly and homogeneously as possible is one of the most imposrtant parts. To obtain a fine globular microstructure in cross section of billet, the optimal design of the induction coil for variation of alloys and specimen sizes is necessary. For the thixo-forging process the construction of the reheating data base is very important, because the reheating conditions are different for variation of SSM and billet sizes. So in this study, the optimal coil design of A356 (ALTHIX) and Aι2024 with d×ι=60×90 (mm) to obtain the globular microstructure is theoretically proposed. The suitability of an optimal coil design will be demonstrated by reheating experiments. Finally, the thixoformability of an arbitrarily shaped product is evaluated by its forming variables. The defects and mechanical properties are also investigated.

Keywords

References

  1. Proceedings of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites Progress in Thixomolding R.F.Decker;R.D.Carnahan;R.Vining;E.Eldener
  2. Proceedings of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites Thixoforming of Aluminum Components for Lightweight Structures T.Witulski;A.Winkelmann;G.Hirt
  3. Proceedings of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites Recent Advances in Semi-Solid Metal(SSM) Cast Aluminum and Magnesium Components K.P.Young
  4. Metallurgical and Materials Transaction A v.30A no.12 An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of AI-6%Si-3%Cu-0.3%Mg Alloy for Thixoforming H.K.Jung;C.G.Kang
  5. 한국주조공학회지 v.19 no.3 Thixoforming을 위한 Al-6%Si-3%Cu-0.3%Mg 합금의 유도 가열 공정에 관한 연구 정홍규;강충길
  6. 한국 주조 공학회지 v.18 no.5 Thixoforming을 위한 Al7%Si-3%Cu-0.3%Mg 합금의 유도가 조건이 구상화 조직에 미치는 영향 정홍규;강충길
  7. 부산대학교 석사학위 논문 A Study on Coil Design and Heating D/B Construction of Semi-Solid Aluminum Alloys for Thixoforming 정홍규
  8. Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites The Induction Heating of Semi-Solid Aluminum Alloys S.Midson;V.Rudnev;R.Gallik
  9. Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites Aluminium Semi-solid Processing : From the Billet to the Finished Part M.Garat;S.Blais;C.Pluchon;W.R.Loue
  10. Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites The Thixoformability of Aluminum Alloys T.Witulski;U.Morjan;I.Niedick;G.Hirt
  11. Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites Induction Aluminum Billet Heater for Semi-Solid Processing F.Matsuura;S.Kitamura
  12. Proceedings of the 6th Int. Conf. on Technology of Plasticity (6th ICTP) Coil Design of Inductive Heating and Reheating Process of Aluminum Alloys for Thixoforming C.G.Kang;H.K.Jung;Y.J.Jung
  13. Proceedings of the 175th JSTP Symposium for Semi-Solid Metals Forming The Characteristics of Thixoforming Product S.Kouji
  14. Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites Die Casting of Aluminum Alloy in Semi-Solid State K.Kitamura;Y.Ando;K.Hironaka;S.Yahata;C.Yoshida
  15. 한국 주조 공학회지 v.19 no.2 반용융 단조품의 제조 공정 및 금형설계 박형진;강충길;김병민;최재찬
  16. 한국 정밀공학회지 v.16 no.6 반용융 단조품의 제조 박형진;강충길;김병민;최재찬
  17. Conduction and Induction Heating E.J.Davies
  18. Induction Heating N.R.Stansel
  19. Induction Heat Treatment V.I.Rudnev;L.C.Raymond;D.L.Loveless;M.R.Black
  20. Metals Handbook(10th Edition) v.2 Properties and Selection : Nonferrous Alloys and Special-Purpose Materials
  21. Proceedings of 42th JSTP Conference Measuring Method of Solid Fraction for Semi-Solid Metals-1 M.Kiuchi;S.Sugiyama
  22. Journal of Materials Processing Tech. v.45 Semi-Solid Forming of Aluminum Alloys by Direct Forging and Lateral Extrusion G.Hirt;R.Cremer;A.Winkelmann;T.Witulski;M.Zillgen
  23. Proceedings of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites Thixoforging of a nomally Wrought Aluminium Alloys K.Dibworth;H.V.Atlcinson;D.H.Kirkwood;ARA McLelland
  24. International Journal of Mechanical Sciences v.41 no.12 Finite Element Analysis with Deformation Behavior Modeling of Globular Microstructure in Forming Process of Semi-Solid Materials C.G.Kang;H.K.Jung
  25. Technical Report, Engineering Research Center for Net Shape and Die Manufacturing, No.NSDM9514-0909-00-01-1.5 Development of Compound Forging Technology of Semi-Solid Materials and Its Commercialization C.G.Kang;J.C.Choi;B.M.Kim;H.J.Park;H.K.Jung;J.H.Park
  26. Proceedings of the 18th Int. Die Casting Conference and Exposition Metallurigical Aspects of Thixoforming of A356.0 and A357.0 Alloys W.Lou;M.Brimont;C.Pluchon;P.Y.Menet;M.Garat
  27. Proceedings of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites Thixoforming of Automobile Components G.Chiarmetta
  28. Proceedings of the 6th Int. Conf. on Technology of Plasticity (6th ICTP) Influence of Process Parameters on the Defects in Thixoforming of Cast and Wrought Aluminum Alloys C.G.Kang;S.S.Kang;H.K.Jung
  29. Proceedings of the 2nd Int. Conf. on Semi-Solid Processing of Alloys and Composites Preliminary Results in Thixoforging Alumium Wrought Alloys A.Tietmann;T.Bremer;G.Hirt;R.Kopp
  30. Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites The Manufacturing of Automobile Parts Using Semi-Solid Metal Processing T.Idegomori;H.Hirono;O.Ito;S.Kimishima;K.Mizoue
  31. Proceedings of the Int. Symposium on Advanced Forming and Die Manufacturing Technology (AFDM'99) Thixoforming of Aluminum Component with Designed Die by Process Simulation C.G.Kang;H.K.Jung;K.W.Jung