Abstract
Impregnation of phosphorous additiers into graphite bulk was studied with the goal of enhancing the effectiveness of oxidationprotection. In addition graphite acid washing was carried out prior to the impregnation further to improve oxidation resistance. Observation of the oxidation rate for raw graphite(Raw) impregnated graphite with tri-butyl phsophate on raw block(RP) and impregnated graphite on acid-treated graphite(AP) in air are reported. The phsophorus residue adsorbed on the graphite surface at active sites was determined by FTIR, XRS, TGA techniques. AP with tri-butyl phosphate was found to result in both 30% reduction in oxidation rate at 1000$^{\circ}C$ compared to Raw and increase of 120$^{\circ}C$ in oxidation temperature From the samples of oxidation rate of each specimen in Arrhenius plot it can be said that the present oxidation resistance origninates from the change of chemical reaction modesw neigther by acid-washing treatment nor phsophate impregnation
탄소재료의 산화저항성 증진을 위해 Tri-Butyl 인산 에스테르를 함참하였다. 시편은 함침전 초산으로 전처리 한 것과 흑연재 Raw Bulk(Raw)를 함침시켜 비교하므로써 초산 세척의 효과도 아울러 조사하였다. XPS와 FTIR을 사용하여 함침처리 전후의 탄소표면의 특성을 검토한 결과 Tn-butyl phosphale로 함침된 시편(RP)의 표면에는 P-O 그룹 및 -OH Band 등의 친수성이 강한 활성기가 존재하였다. 산세척한 시편을 함침한 탄소재(AP)는 Raw보다 산화게시온도가 약 120$^{\circ}C$ 향상되었고 산화율은 1000$^{\circ}C$에서 30% 감소된 효과를 보였다. 본실험에서 구한 Raw, 초산세척 시편, 초산처리후 함침한 시편들의 Arrbenius Plot으로부터 동일한 값의 기울기를 나타내어 탄소의 산화반응 요인중에 본실험에서 처리한 내산화과정은 탄소표면의 기본적 화학반응변화에 의한 효과로 보여지지 않는다.