한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제36권5호
  • /
  • Pages.513-520
  • /
  • 1999
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지

알루미나 또는 카본 코팅 SiC 휘스커의 코팅층 두께 및 형상에 미치는 코팅조건의 영향

Effects of Coating Conditions on the Thickness and Morphology of Alumina- or Carbon-Coated Layers on SiC Whiskers

  • 배인경 (인하대학교 무기재료공학과) ;
  • 장병국 (한국에너지 기술연구소) ;
  • 조원승 (인하대학교 무기재료공학과) ;
  • 최상욱 (인하대학교 무기재료공학과)
  • 발행 : 1999.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Alumina-coated SiC whiskers wee prepared by the calcination (1150$^{\circ}C$, 1h, Ar) of the alumina hydrate layer which was precipitated homogeneously on whisker surface from a solution of Al2(SO4)3 and urea as a precipitant. In addition carbon coated SiC whiskers were prepared by the pyrolysis (1000$^{\circ}C$, 4h Ar) of phenolic resin coated whisker. The effects of coating conditions on the thickness and morphology of the coated layers were examined by SEM and TEM. It was found that Al2O3-coating layers become thinner and more uniform with decreasing the Al2(SO4)3 concentration. Thin (0.075-0.1$\mu\textrm{m}$) and uniformly alumina-coating layers were obtained at the Al2(SO4)3 concentration 0.010mol/l. On the other han carbon-coating layers were uniform but very thin (5-16 nm) in thickness. For thicker carbon-coating layers ethanol as a disperse medium was found to be more efficient compared tousing acetone.

키워드

참고문헌

  1. Ceram. Eng. Sci. Proc. v.71 no.11 Effects of SiC Whisker Treatments on the Performance of SiC Whisker/Alumina Matrix Composites D. Q₁;R. T. Coyle
  2. J. Am. Ceram. Soc. v.73 no.2 Silicon Carbide Whisker/Alumina Matrix Composites. Effect of Whisker Surface Treatment on Fracture Toughness J. Homey;W. Vaughn
  3. Ceram. Eng. Sci. Proc. v.15 no.9-10 Improved Carbon Coating for Silicon Carbide Whiskers T. J. Mroz;E. A. Groat;J. P. Buckner;J. M. Prinzbach
  4. Ceram. Eng. Sci. Proc. v.14 no.9-10 Fabrication of AIN-SiC Whisker Composites T. Mroz;E. Groat;P. Fini
  5. J. Mater. Sci. v.29 Effects of Amorphous Silica Coatings on the Sintering Behaviors of SiC Whisker-reinforced Al₂O₃ Composites C. C. Cheng;F. S. Yen
  6. J. Ceram. Soc. Japan v.99 no.11 The Effect of Surface Coating and Orienting of Whiskers on Mechanical Properties of SiC(w)/Si₃N₄ T. Matsui;O. Komura;M. Miyake
  7. Am. Ceram. Soc. Bull. v.63 no.6 High Purity Alumina by Controlled Precipitation from Aluminum Sulfate Solutions J. E. Blendell;H. K. Bowen;R. L. Coble
  8. J. Ceram. Soc. Japan. v.101 no.7 Preparation of Alumina Hydrate-Coated SiC Whisker Effect of Reaction Condition on the Morphology of Coated Body H. Nakamura;A. Kato
  9. J. Mater. Sci. v.25 Preparation and Properties of Uniform Mixed and Coated Colloidal Particles B. Aiken;W. P. Hsu;E. Matijevic
  10. J. Am. Ceram. Soc. v.78 no.1 Processing and Properties of Particulate Composites from Coated Powders T. D. Mitchell, Jr.;L. C. De Jonghe
  11. J. Am. Ceram. Soc. v.77 no.3 Dense Al₂O₃/ZrO₂Particulate Composites by Free Sintering of Coated Powders C. L. Hu;M. N. Rahaman
  12. Adv. Ceram. Mater. v.2 no.4 Preparation and Properties of Coated. Uniform, Inorganic Colloidal Particles : I, Aluminum (Hydrous) Oxide on Hematite, Chromia and Titania S. Kratohvil;E. Matijevic
  13. J. Mater. Sci. v.23 Synthesis of Hydrous SnO₂and SnO₂-Coated TiO₂Powders by the Homogeneous Precipitation Method and Their Characterization B. K. Kim;I. Yasui
  14. Ceram. Inter. v.21 Usefulness of Alumina-coated SiC Whiskers in the Preparation of Whisker-Reinforced Alumina Ceramics A. Kato;H. Nakamura;N. Tamari;T. Tanaka;I. Kondo
  15. J. Am. Ceram. Soc. v.76 no.10 SiC-whisker-Reinforced Al₂O₃Composites by Free Sintering of Coated Powder C. L. Hu;M. N. Rahaman
  16. Ceram. Eng. Sci. Proc. v.14 no.9-10 Preparation and Characterization of Coated SiC Whiskers E. Groat;T. Mroz, Jr.;S. Gangolli;R. Partch
  17. 대한금속학회회보 v.9 no.6 초박막절편법 박경수
  18. Ceram. Inter. v.18 no.3 Effect of Crystallization of Alumina Hydrate in Preparation of Alumina-Coated Composite Particle H. Nakamura;A. Kato
  19. Br. Ceram. Trans. v.92 no.3 Sintering Behavior of Aluminum Oxides Derived from Aluminum Hydrodxides with Various Morphologies H. Nagai;Y. Oshima;K. Hirano;A. Kato
  20. 무기재료원료공학 이종근