A Study on Performance Improvement of Weft Insertion Mechanism for Rapier Loom Using Elliptical Gear

타원 기어에 의한 레피어 직기용 위입기구의 성능향상에 관한 연구

  • 김종수 (한국기계연구원 인쇄·섬유기계연구그룹) ;
  • 강동우 (창원대학교 기계설계공학과) ;
  • 신중호 (창원대학교 기계설계공학과)
  • Published : 1999.03.01

Abstract

This paper presents the kinematic analysis of a common rapier mechanism using three dimensional closed loop method. Also a new rapier mechanism using an elliptical gear set as a driving system in order to improve the inserting motion of the rapier is proposed. The elliptical gear set proposed in the paper can transmit the exact cyclic motion to the rapier mechanism as the driving motion. Although a driving gear on the main shaft rotates at a constant velocity, a driven gear has a variable velocity ratio on an instant contact point. By using an elliptical gear set, smoothness of the inserting motion of the rapier is obtained. The proposed mechanism improves the characteristics of the common rapier, resulting in an increases in the available width of the fabric. This paper presents the comparative data of displacements and velocities of two system.

Keywords

References

  1. Design of Machinery R. L. Norton
  2. Gear Design and Application N. P. Chironis
  3. Gear Geometry And Applied Theory F. L. Litvin
  4. Fiber Technology and Industry v.2 J. S. Kim;K. Y. Kim
  5. Master Thesis, Changwon National University D. W. Kang