Easing Contraction for Three-dimensional construction of Sleeve

소매입체구성을 위한 오그림

Dressmaking which is defined as the process of changing two-dimensional cloth into three-dime-nsional clothes needs a lot of joining parts. Particularly sleeve needs a more curved surface than other joining parts owing to shape of the top of arms. Easing is used to control the fullness along the seam-line to create the fullness curved shape of the sleeves and it plays an important role in increasing three-dimensional constru-ction power. unfortunately sufficient data regarding effective easing conditions to increase three-dimensional construction power of sleeve are not available. Therefore the author tried to investigate the effective easing conditions to increase three-dimensional construction power of sleeve by cap height. Easing construction power of sleeve by cap height. Easing contraction made by different angles on the sleeve cap curve line previous work were examined and the effective easing conditions according to the variation of angles were determined. This study contains the following objectives. Firstly to obtain the easing contraction ratio in sleeve according to the above easing conditions. Secondly to investigate the three-dimensional construction power or sleeve by the factors of easing contraction. Thirdly to determine for each sleeve the effective easing conditions on the basis of the calcuative easing contraction ratio in the sleeve patterns by cap heights.