Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지

A Study on the Grinding Characteristics of Carbon Fiber Epoxy Composite Hollow Shafts

탄소섬유 에폭시 복합재료 중공축의 연삭 특성에 관한 연구

  • Published : 1999.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Since carbon fiber epoxy composite materials have excellent properties for structures due to their high specific strength, high modulus, high damping and low thermal expansion, the hollow shafts made of carbon fiber epoxy composites have been widely used for power transmission shafts for motor vehicles, spindles of machine tools and rollers for film manufacturing. However, the molded composite shafts are not usually accurate enough for mechanical machine elements, which require turning or grinding of composite hollow shafts. In this paper, the grinding characteristics of composite hollow shafts, which are flexible in the radial and circumferential directions, were investiaged experimentally and analytically with respect to the stacking angle, thickness and outer diameter.

Keywords

References

  1. Composites v.1 Reinhart, T. J.
  2. Robotica v.9 Manufacturing of a SCARA Type Direct-Drive Robot with Graphite Epoxy Composite Materials Lee, D. G.;Kim, K. S.;Kwak, Y. K.
  3. Composite Structures v.38 Development of Guide Roller Using Electroplated Carbon Fiber Composite for Thin Polymer Film Processing Bang, K. G.;Choi, J. K.;Kim, H. S.;Lee, D. G.;Jeon, H. S.
  4. Composite Structures v.25 Development of the Anthropomorphic Robot with Carbon Fiber Epoxy Composite Material Lee, D. G.;Jeong, K. S.;Kim, K. S.;Kwak, Y. K.
  5. Composite Structures v.37 Manufacturing of a Carbon Fiber-Epoxy Composite Spindle-Bearing System for a Machine Tool Choi, J. K.;Lee, D. G.
  6. Int. J. Mach. Tools Manufact v.35 Orthogonal Cutting Mechanism of Graphite/Epoxy Composite Wang, D. H.;Ramulu, M.;Arola, D.
  7. Int. J. Mach. Tools Manufact v.35 On the Maching of Fiber Reinforced Plastic (FRP) Composite Laminates Bhatnagar, N.;Ramakrishman, N.;Naik, N. K.;Komanduri, R.
  8. KSME v.12 Characteristics of Tool Wear in Cutting of Glass Fiber Reinforced Plastics Kang, M. S.;Lee, W. P.
  9. KSPE v.12 A Study on the Machine Surface Morphology of Laminate Composite Wang, D. H.
  10. Int. J. Mach. Tools Manufacts v.37 Some Experimental Investigations in the Drilling of Carbon Fiber Reinforced Plastic Composite Laminates Chen, W. C.
  11. JSPE v.27 Characteristics of trimming CFRP with End Mills Asahina, K.;Suzuki, S.
  12. Int. J. Mach. Tools Manufact v.35 Cutting Glass Fiber Reinforced Composite Using CO2 Laser with Multimodel - Gaussian Distribution Caprino, G.;Tagliaferri, V.;Covelli, L.
  13. KSME v.18 Mirror Surface Grinding Characteristics and Mechanism of Carbon Fiber Reinforced Plastics Park, K. Y.;Lee, D. G.;Nakagawa, T.
  14. KSCM v.10 A Study on Grinding Characteristics of Glass Fiber Reinforceㅇ Plastics with Electrolytic In-Process Dressing An, S. O.;Noh, S. L.
  15. ANSYS User's Manual
  16. Tool and Manufacturing Engineers Handbook, (4th Edition) v.1 Dorzda, T. J.;Wick, C.
  17. Grinding Technology Malkin, S.
  18. Wear v.53 Effect of Fiber Orientation on Friction and Wear of Fiber Reinforced Polymeric Composites Sung, N. H.;Suh, N. P.
  19. Int. J. Mach. Tools Manufact. v.35 Damage Development in Drilling Glass Fiber Reinforced Plastics Caprino, G.;Tagliaferri, V.