의사등방성 복합재 적층판의 피로손상

Fatigue Damage of Quasi-Isotropic Composite Laminates

  • 김인권 (조선대학교 기계기술연구소)
  • 발행 : 1999.08.01

초록

본 연구는 인장하중의 방향변화에 따른 의사 등방성 복합재 적층판의 피로손상거동의 변화에 대하여 알아보았다. [0/-60/+60]$_s$ 적층판과 [+30/-30/90]$_s$ 적층판의 저 싸이클 피로시험을 행하였고, 재료계는 AS4/Epoxy와 AS4/PEEK를 사용하였다. [+30/-30/90]$_s$ 적층판의 피로손상은 [0/-60/+60]$_s$ 적층판에 비하여 아주 달랐다. AS4/Epoxy와 AS4/PEEK [+30/-30/90]$_s$ 적층판에 발생한 층간분리의 위치가 모재의 종류에 따라 다르게 나타났다. 층간분리 진전시 측정된 변형률을 사용하여 임계 변형률 에너지 해방률을 계산하였다. 실험결과를 모드별 변형률 에너지 해방률의 제안된 계산법으로 얻어진 해석 결과와 비교한 결과, 잘 일치되었다.

In this study, when the applied directions of tensile loading is changed fatigue damage of quasi-isotropic composite laminates was discussed. Low cycle fatigue tests of $[0/-60/+60]_s$ laminates and $[+30/-30/90]_s$ laminates were carried out. Material systems used were AS4/Epoxy and AS4/PEEK. The fatigue damage of $[+30/-30/90]_s$ laminates differed from that of $[0/-60/+60]_s$ laminates. The position of delamination generated at AS4/Epoxy and AS4/PEEK $[+30/-30/90]_s$ laminates appeared differently according to the kind of matrix. Critical values of strain energy release rate were obtained by using the strain measured at the initiation of delamination. The experimental results agreed well with the results obtained by the proposed method for determining strain energy release rate.

키워드

참고문헌

  1. J. Compos. Mater. v.4 Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension Pipes, R. B.;Pagano, N. J.
  2. Damage in Composite Materials, ASTM STP 775 Characterization of Delamination Onset and Growth in a Composite Laminate O'Brien, T. K.
  3. KSME Int. J. v.12 no.4 A Simple Method to Calculate Mode Components of Strain Energy Release Rate of Free-Edge Delaminations in Composite Laminates Kim, I. K.
  4. Compos. Mater. v.29 Effects of Large Deflection on Mode Ⅱ Fracture Test of Composite Materials Wang, H.;Khanh, T. V.;Le, V. N. J.
  5. Fracture, ASTM STP 1012 v.2 Mode Ⅱ Delamination Fracture Toughness of Unidirectional Graphite / Epoxy Composites Corleto, C. R.;Bradley, W. L.
  6. Compos. Mater.:Fatigue & Fracture, ASTM STP 1012 v.2 Mode Ⅰand Mode Ⅱ Delamination of Thermosetting and Thermoplastic Composite Prel, Y. J.;Davies, P.;Benzeggagh, M. L.;de Charentenay, F.-X.
  7. Compos. Mater.:Fatigue & Fracture, ASTM STP 1012 v.2 Characterization of Matrix Toughness Effect on Cyclic Delamination Growth in Graphite Fiber Composites Mall, S.;Yun, K. -T.;Kochhar, N. K.
  8. 九州大學博士學位論文 擬似等方性複合材料積層板の疲勞損傷に及ぽす荷重方向變化の影響に關する硏究 金仁權