Chemical Compositio and Structure of Evaporated Alloying Element by Laser Welding Condition

레이저 용접조건에 따른 증발된 합금원소의 조성과 구조의 변화

  • 조상명 (부경대학교 생산가공공학과)
  • Published : 1999.07.01

Abstract

This study is aimed to obtain fundamental knowledge of pulse laser welding phenomena the authors investigated the structure and composition of evaporated particles of Al alloys in air and in the Ar atmosphere during pulsed laser welding. The ultra-fine particles of 5 to 100nm diameter in a globular or irregular shape were formed in laser-induced plasma and the main structure was $MgAl_2O_4$ The composition of particles was ifferent depending on the power density of a laser beam; namely under the low power density conditions magnesium was predominant in the parti-cles while aluminium content increased with an increase in the power density. These results were attributed to evaporation phenomena of metals with different boiling points and latent heats of vaporization. On the other hand the number density of laser-induced plasma species was obtained by Saha's equation. it was confirmed that the number density depends upon the plasma tempera-ture and total pressures.

Keywords

References

  1. 溶接技術 産業用ェキシマレ-ザとその應用 谷九 浩;花井 政吉;齊藤 裕一
  2. 한국박용기관학회지 v.22-6 레이저 용접현상과 산업계로의 응용 김 종도;松繩 郞
  3. Proceedings of LAMP'92 Wide Possibilities of Laser Technology in Production of Aircraft Engines Y.V.Poloskin;V.D.Talalaev;V.M.Trishkin
  4. 鐵と鋼 v.71-14 鐵鋼業におけるレ一ザ一の利用 高藤 英生;市古 修身
  5. 한국박용기관학회지 v.23-3 펄스 YAG 레이저 용접시 유기하는 플라즈마의 스펙트럼선 同定과 발광특성 김종도
  6. 한국박용기관학회지 v.23-4 레이저 용접시 분광학적 수법에 의한 증발입자의 거동과 플라즈마 물성의 계측 김종도;김윤해
  7. 金屬の電子顯微鏡寫眞と解設 西山善次;幸田成康編
  8. Transactions of JWRI in Osaka University v.20-1 Beam - Plume Interaction in Laser Materials Processing A.Matsunawa;T.Ohnawa
  9. アグネ 技術センタ- 圖解ファインセラミックスの結晶化學 F.S. ガラッソ一;可藤誠軌;植松敬三譯
  10. コロナ プラズマ工學例題演習 中野
  11. 電氣學會論文集A v.98-4 銅蒸氣混入にょる高溫蒸氣中の電子密度の增大 作田;鬼頭;宮地
  12. Atomic Energy Level(Circular of the National Bureau of Standard 467" v.Ⅰ C.E.Moore