Utilization of Vitraified Glass as an Aggregate Source in Concrete

Vitrified Glass 콘크리트의 특성

  • Published : 1999.12.01

Abstract

Over 4.1 billion metric tons of non-hazardous solid wstes are generated in the United States annually. Therefore, there is a need to reuse or reprocess as many products or by-products as possible. In this report, theaggregates produced from Naval Shipyard and Charleston area dredge spoils are designated as GP-21-23 and GP 4-5, repectively. The major objective of this study is to determine the feasiblity of the use of these aggregates in concrete. The followings are some of the conclusions, observations and recommendations regarding this portion of the research project. In most cases, the unit weight of concrete containing GP 21-23 and GP 4-5 (vitrified galss) lower than the control concrete, and the concrete containing vitrified glass produced lower compressive and bending strength compared to the control. However the concrete containing virtrified glass could be used in the field based on the minimum criterial set for the mix design. The use of vitrified glass in concrete is recommended in several applications except parking lots, side walks and main roads, because abrasion resistace is not high.

Keywords

References

  1. 도로교 표준시방서 건설교통부
  2. Journal of The Korean Society of Agricultural Engineers v.39 Utilization of vitrified glass as an aggregate source in asphalt concrete mixtures Min, Jeong-Ki
  3. A feasibility study of the waste materials in highway construction Amirkhanian, S.;Manugian, D.
  4. The Journal of Solid Waste Technology and Management v.24 no.2 Utilization of waste materials in highway industry Amirkhanian, S.
  5. Standard test method for compressive strength of cylindrical concrete specimens v.04. 02 American Society for Testing and Materials
  6. Standard test method for unit weight, yield, and air content of concrete v.04. 02 American Society for Testing and Materials
  7. Standard test method for flexural strength of concrete (using simple beam with center-point loading) v.04. 02 American Society for Testing and Materials
  8. Standard test method for static modulus of elasticity and poisson's ratio of concrete in compression v.04. 02 American Society for Testing and Materials