ADI 절삭시 AE신호에 의한 플랭크 마멸폭의 인프로세스 검출

In-Process Detection of Flank Wear Width by AE Signals When Machining of ADI

  • 발행 : 1999.12.01

초록

Monitoring of Cutting tool wear is a critical issue in automated machining system and has been extensively studied for many years. An austempered ductile iron(ADI) exhibits the excellent mechanical properties and the wear resistance. ADI has generally the poor machinability due to the characteristic. This paper presents the in-process detection of flank wear of cutting tools using the acoustic emission sensor and the digital oscilloscope. The amplitude level of AE signal(AErms) is mainly affected by cutting speed and it is proportional to cutting speed. There have been the relationship of direct proportion between the amplitude level of AE signals and the flank wear width of cutting tool. The flank wear with corresponding to the tool life is successfully detected with the monitor-ing system used in this study.

키워드

참고문헌

  1. 鑄物第24委員會鑄物分科會 球狀黑鉛鑄鐵の强じん化をためのオステンパ-處理條件, 鑄鐵の磨耗と材料特性 和出 昇;上田琡完
  2. AFS Trans. v.92 A Guide to Mechanical Properties Possible by Austempering 1.5%Ni-0.3%Mo Ductile Iron J. F .Janwak;P.A.Morton
  3. AFC Trans. v.123 Continuous Cooling Transformation and Austempering Behavior of Cu-Mo Ductile Iron Y.J.Park;P .A.Morton
  4. 한양대학교 박사학위논문 오스템퍼링한 저합금 구상흑연주철의 기계적 성질 및 마멸특성에 관한 연구 박홍식
  5. JSPE v.45 no.4 Study on Separation Process at Tool Tip in Metal Cutting(2nd Report)-Detecting Fracture Phenomena at Tool Tip in Separation Process by Acoustic Emission Techniques T.Kaneeda;H.Tsuwa
  6. Acoustic Emission, ASTM STP505 Dislocation Motion as a Source of Acoustic Emission J.R.Fredrick;D.K.Felbeck
  7. Fundamentals of Acoustic Emission Acoustic Emission and Inhomogeneous Deformation in Plastic Deformation T.Kishi;K.Kuribayashi
  8. Fundamentals of Acoustic Emission Microscopic Aspects of Fracture and Acoustic Emission in Models K. Sano;K. Fujimoto
  9. Wear v.162;163;164 Ceramic Tool Wear when Machining Austempered Ductile Iron I.R.Pashby;J.Wallbank;F.Boud
  10. JSPE v.53 no.4 球狀黑鉛鑄鐵切削におけるセラミック工具の磨耗 嗚瀧則彦;間田泰弘
  11. 한국정밀공학회 v.13 no.11 오스템퍼링 처리한 구상흑연주철의 AE신호에 의한 절삭공구 손상의 검출에 관한 연구 전태옥;박홍식;이광영;예규현