References
- Compend Contin Educ Dent v.18 no.3 Clinical dentistry in the 21st century H. C. Slavkin
- Biomaterials v.19 no.16 Biomaterials : a forecast for the future I. I. Hench
- Aust Dent J v.43 no.3 A new cavity classification G. J. Mount;W. R. Hume
- Compend Contin Educ Dent v.18 no.6 Air abrasion : the fulure of restorative microdentistry G. M. Radz
- Dent Today v.17 no.3 New concepts in air abrasion R. N. Porth
- Dent Clin North Am v.42 no.4 Esthetic dentistry in the twenty-first century. IIealthy beauty T. Maruyama
- J Dent Edu v.62 Restorative dentistry : Current Status and future directions W. R. Hume
- J Am Dent Assoc v.128 no.5 New developments in resin restorative systems K. F. Leinfelder
- Acta Odontol Scand v.57 no.1 IIighly cross linked nelworks for dental applications obtained by photocuring of tris 2-(acryloyoxy) ethyl isocyanurale, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol triacrylate, and pentaerythritol triacrylate J. Nie;L. A. Linden;J. F. Rabek;J. Ekstrand
- J Biomater Sci Polym v.9 no.9 Development of new photopolymerizable dental sealants N. Davidenko;M. E. Cohen;J. M. Diaz;R. Sastre
- Signature v.4 no.2 Ceromer/FRC technology : the future of biofunctional adhesive aesthetic dentistry N. Jr. Fahl;R. C. Casellini
- J. Oral Rehabil v.26 no.1 Finishing and polishing of the ceromer material Targis. Lab-side and chair-side methods M. Behr;M. Rosentritt;A. Leibrock;S. Schneider-Feyrer;G. Handel
- Pract Periodontics Aesthet Dent v.9 no.5(suppl) A new system for posterior restorations : a combination of ceramic optimized polymer and fiber-reinforced composite L. Rosenthal;T. Trinkner;C. Pescatore
- Eur J Prosthodont Restor Dent v.6 no.2 In vitro study of fraclure strength and marginal adaplation of fibre-reinforced-composite versus all ceramic fixed partial denlures M. Loose;M. Rosentritt;A. Leibrock;M. Bohr;G. Handel
- Dent Today v.17 no.2 A new condensable composite for the restoration of posterior teeth K. Leinfelder;A. Prasad
- J Am Dent Assoc v.129 no.5 A characterization of first-generation flowable composites S. C. Bayne;J. Y. Thompson;E. J. Jr. Swift;P. Stamatiades;M. Wilkerson M
- J Prosthet Dent v.79 no.4 Color stability of dental composites as a function of shade H. Uchida;J. Vaidyanathan;T. Viswanadhan;T. K. Vaidyanathan
- Surface finish produced on resin composites by new polishing systems v.30 no.3 J. C. Setcos;B. Tarim;S. Suzuki
- Pract Periodontics Aesthet Dent v.11 no.1 An evaluation of four light-curing units comparing soft and hard curing J. O. Burgess;M. DeGoes;R. Walker;A. H. Ripps
- J Oral Rehabil v.25 no.6 The effect of the photopolymerization method on the quality of composite resin samples Z. Tarle;A. Meniga;M. Ristic;J. Sutalo;G. Pichler;C. L. Davidson
- J Clin Laser Med Surg v.15 no.3 Polymerization shrinkage of restorative resins using laser and visible light curing T. C. Aw;J. I. Nicholls
- Biomaterials v.19 no.16 Study of dental materials by laser beam scanning V. Fano;W. Y. Ma;I. Ortalli;K. Pozela
- Gen Dent v.45 no.1 Curing lights : changes in intensity output with use over time J. G. Poulos;D. L. Styner
- Biomaterials v.19 no.6 New trends in glass-ionomer chemistry R. Guggenberger;R. May;K. P. Stefan
- J Dent Res v.76 no.4 Comparative physico-mechanical charac terization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials S. Gladys;B. van Meerbeek;M. Braem;P. Lambrechts;G. Vanherle
- Glass-ionomer cements in restorative dentistry v.28 no.11 J. W. Nicholson;T. P. Croll
- Proc Inst Mech Eng v.212 no.2 Glass-ionomers in medicine and dentistry J. W. Nicholson
- Aust Dent J v.44 no.1 Resin-ionomer restorative materials for children : a review K. M. Hse;S. K. Leung;S. II. Wei
- J Oral Rehabil v.25 no.1 Effects of storage, thermal and load cycling on a new reinforced glass-ionomer cement A. U. Yap
- Oper Dent v.23 no.4 Reparability of three resin-modified glass-ionomer restorative materials R. A. Shaffer;D. G. Charlton;C. B. Hermesch
- Gen Dent v.46 no.1 Direct posterior composite restorations-stale of the art 1998 B. W. Small
- J Dent v.26 no.1 The clinical performance of adhesives B. van Meerbeek(et al)
- J Esthet Dent v.11 no.1 Rationalization of esthetic restorative dentistry based on biomimetics P. Magne;W. H. Douglas
- Oral Surg Oral Med Oral Pathol Oral Radiol Endod v.86 no.1 A histopathologic study of direct pulp-capping with adhesive resins A Olmez;N. Oztas;F. Basak;B. Sabuncuoglu
- Am J Dent v.10 no.2 Ultra structure of the resin-dentin interface following reversible and irreversible rewetting F. R. Tay;A. J. Gwinnett;S. H. Y. Wei
- Oper Dent v.23 no.4 Resin-infiltrated dentin layer formation of new bonding systems C. Prati;S. Chersonu;R. Mongiorgi;D. H. Pashley
- Adv Dent Res v.11 no.4 Applications of confocal laser scanning microscopy to dental banding T. Pioch;S. Stotz;H. J. Stachle;H. Duschner
- J Dent Res v.76 no.1 An FT-Raman spectroscopic investigation of dentin and collagen surfaces modified by 2-hydroxyethlmethacrylate J. Xu;I. Stangel;I. S. Butler;D. F. Gilson
- J Dent Res v.76 no.6 Why do shear bond tests pull out dentin? A. Versluis;D. Tanbirojn;W. H. Douglas
- J Adhes Dent v.1 no.1 Do dentin bond strength tests serve a useful purpose? S. Sudsangiam;R. van Noort
- Oper Dent v.24 no.1 Hardening of new resin cements cured through a ceramic inlay O. M. el-Mowafy;M. H. Fubo;W. A. el-Badrawy
- J Esthet Dent v.11 no.1 Laboratory evaluation and clinical application of a new one-bottle adhesive J. Perdigao;L. N. Baratieri;M. Lopes M
- Eur J Oral Sci v.107 no.1 Influence of eugenolcontaining temporary cement on efficacy of dentin-bonding systems A. Peutzfeldt;E. Asmussen
- Dent Mater J v.16 no.1 New initiator system for bonding to dentin using methlcylohexanedione Y. Imai;M. Ishikawa
- Dent Clin North Am v.42 no.4 Tissue management needs for adhesive dentistry now and in the future D. E. Fischer
- J Dent v.25 no.2 Ceramics update A. J. Qualtrough;V. Piddock
- J Prosthet Dent v.81 no.3 In vitro investigation of the wear of human enamel by dental porcelain K. T. Yetzler;R. D. Woody;A. W. 3rd Miller;B. H. Miller
- Pract Periodontics Aesthet Dent v.10 no.7 Utilization of advanced metal-ceramic technology : clinical and laboratory procedures for a lower-fusing porcelain E. A. McLaren
- Compend Contin Educ Dent v.19 no.11 Ceramic inlay fabrication with three-dimensional copy milling technology - Celay R. D. Trushkowsky
- J Dent Technol v.16 no.2 Empress 2. First year clinical results L. Culp
- J Prosthet Dent v.78 no.4 Resin-bonded metal-ceramic inlays : a new approach T. Sewitch
- J Oral Rchabil v.26 no.2 In vitro study of the effect of thermo- and load-cycling on the bond strength of porcelain repair systems A. Leibrock;M. Degenhart;M. Behr;M. Rosentritt;G. Handel
- J Dent v.26 no.7 Survival of three types of veneer restorations in a clinical trial : a 2.5-year interim evaluation A. C. Mcijering;N. H. Creugers;F. J. Roeters;J. Mulder
- Int J Prosthodont v.11 no.5 Development and manufacture of prosthodontic components : do we need changes? P. A. Watson
- Ann Periodontol v.2 no.1 The Food and Drug Administration and the regulation of clinical trials for endosseous implants P. D. Scott;S. Runner
- Biomaterials v.18 no.7 High-prectsion, cost-effective cutting system for producing thin sections of oral tissues containing dental implants A. Piattelh;A. Scarano;M. Quaranta
- Clin Oral Implants Res v.8 no.6 Osseointegration enhanced by chemical etching of the litanium surface. A torque removal study in the rabbit P. R. Klokkevold;R. D. Nishimura;M. Adachi;A. Caputo
- Biomaterials v.19 no.17 Formation of hydroxyapatite in new calcium phosphate cements S. Takagi;L. C. Chow;K. Ishikawa
- Compend Contin Educ Dent v.18 no.3 Promising new dental materials on the horizon F. C. Eichmiller
- J Biomed Mater Res v.41 no.1 Application of FT-IR microspectroscopy to the study of an injectable composite for bone and dental surgery P. Weiss;S. Bohic;M. Lapkowski;G. Daculsi
- J Biomed Mater Res v.37 no.6 Bioactive bone cement : comparison of AW-GC filler with hydroxyapatite and beta-TCP fillers on mechanical and biological properties M. Kobayashi;T. Nakamura;J. Tamura;T. Kokubo;T. Kikutani
- Dent Mater J v.17 no.4 Adhesion of adhesive resin to dental precious metal alloys. Part I. New precious metal alloys with base metals for resin bonding H. Ohno;Y. Yamane;K. Endo;Y. Araki;Y. lizuka
- Contact Dermatitis v.39 no.2 New developments in jewellery and dental materials J. Vilaplana;C. Romaguera
- J Am Dent Assoc v.129 no.11 Amalgam at the new millennium T. G. Berry;J. B. Summitt;A. K. Chung;J. W. Osborne
- Br Dent J v.183 no.1 The future of dental amalgam : a review of the literature. Part 7 : Possible alternative materials to amalgam for the restoration of posterior teeth B. M. Eley
- J Dent Res v.76 no.1 Surface characterization of amalgam made with Hg-In liquid alloy H. Nakajima(et al)
- Photoelastic assessment of the expansion of direct-placement gallium restorative alloys v.30 no.3 J. W. Osborne
- J Can Dent Assoc v.64 no.9 Gallium restorative materials D. McComb
- Oper Dent v.22 no.5 In vitro corrosion behavior and microstructure examination of a gallium-based restorative E. J. DeSchepper;Y. Oshida;B. K. Moore;N. B. Cook;H. Eggertson
- J Prosthet Dent v.80 no.4 In vitro evaluation of biocompatibility of experimental titanium alloys for dental restorations R. R. Wang;Y. Li
- Biomed Mater Eng v.7 no.4 New titanium alloys for biomaterials : a study of mechanical and corrosion properties and cytotoxicity T. I. Kim;J. H. Han;I. S. Lee;K. H. Lee;M. C. Shin;B. B. Choi
- Am J Orthod Dentofacial Orthop v.113 no.4 A new self curing resin-modified glassionomer cement for the direct bonding of orthodontic brackets in vivo J. P. Fricker
- J Orofac Orthop v.58 no.1 Compomersa new bracket bonding generation in orthodontics? H. Eberhard;U. Hirschfelder;J. Sindel
- Semin Orthod v.3 no.3 Orthodontic wire : a continuing evolution R. J. Nikolai
- J Endod v.24 no.12 In vitro evaluation of a carbon fiber post J. P. Dean;B. G. Jeansonne;N. Sarkar
- Int J Periodontics Restorative Dent v.18 no.6 A new all-ceramic post and core system : Clinical, technical, and in vitro results Y. Kakehashi;H. Luthy;R. Naef;A. Wohlwend;P. Scharer
- Aust Dent J v.43 no.6 Polyvinyl siloxane impression materials : an updale on clinical use M. N. Mandikos
- N Y State Dent J v.63 no.6 Disinfection of impressions. Methods and effects on accuracy J. G. Poulos;L. R. Antonoff
- Am J Dent v.10 no.1 One visit composite onlay utilizing a new flexible model material R. D. Trushkowsky
- Dent Mater J v.17 no.3 Gypsum-bonded alumina dental investment for high-fusing casting M. Yan;H. Takahashi
- Am J Dent v.10 no.2 Use of a clear matrix to minimize finishing of a posterior resin composite R. D. Trushkowsky
- Oper Dent v.23 no.6 Evaluation of custom occlusal matrix technique for posterior light-cured composites J. C. Hamilton;K. E. Krestik;J. B. Dennison
- Dent Mater v.13 no.2 A Study of component release from resin pit and fissure sealants in vitro A. Hamid;W. R. Hume
- Contact Dermatitis v.36 no.3 Product analysis of acrylic resins compared to information given in material safety data sheet M.-L. Henriks·Eckerman;L. Kanvera
- J Periodontol v.68 no.8 A mucosal irritancy test device for intraoral use in dogs M. R. Wirthlin;G. C. Armitage;S. Rao;B. Fritzinger;S. Phillips;J. Heller
- J Mat Sci Mat Med v.8 The cell and molecular biologic approach to biomaterial research : a perspective C. J. Kirkpatrick(et al.)
- Quintessence Int v.28 no.1 Glass fiber reinforcement in repaired acrylic resin removable dentures : preliminary results of a clinical study P. K. Vallittu
- Dent Clin North Am v.43 no.1 New-generation bonded reinforcing materials for anterior periodontal tooth stabilization and splinting H. E. Strassler;A. Haeri;J. P. Gultz
- J Osaka Dent Univ v.32 no.2 Setting time and sealing ability of alpha-tricalcium phosphate cement containing titanic oxide M. Yoshikawa;Y. Terada;T. Toda
- J Oral Rehabil v.24 no.1 Influence of talc on the properties of polycarboxylate cement R. K. Bansal;U. S. Tewari;P. Singh;D. V. Murthy