DOI QR코드

DOI QR Code

Disposable Glucose Sensor Based on Platinised Carbon Paste Electrode

백금 도금된 탄소반죽 전극을 이용한 일회용 글루코오스 센서

  • 이동주 (㈜올메디쿠스 부설연구소) ;
  • 유재현 (광운대학교 이과대학 화학과) ;
  • 최강 (광운대학교 이과대학 화학과) ;
  • 최문희 (광운대학교 이과대학 화학과) ;
  • 김문환 (광운대학교 이과대학 화학과) ;
  • 류준오 (㈜올메디쿠스 부설연구소) ;
  • 한상현 (광운대학교 이과대학 화학과) ;
  • 차근식 (광운대학교 이과대학 화학과) ;
  • 남학현 (광운대학교 이과대학 화학과)
  • Published : 1999.11.01

Abstract

Disposable, amperometric glucose sensor was constructed using platinised carbon paste electrode. The sensor response was studied by amperometry and cyclic voltammetry applying sample solutions on the strip-type electrode. Platinization of screen-printed carbon paste electrode effectively improved the electrochemical reversibility of a mediator and the analytical characteristics of the sensor. The heterogeneous rate constant for $[Fe(CN)_6]^{4-/3-}$ was $1.45\times10^{-2}cm{\cdot}s^{-1}$. An applied potential of 0.3V vs. Ag/AgCl resulted in the best selectivity for glucose. The apparent Michaelis-Menten constant for glucose on the strip sensor, $K_m^{app}$, was 24.5 mM. To evaluate the analytical performance of the glucose sensor strip, a correlation study was performed with the NOVA S.P, Ultra M analyzer for 30 serum samples containing $80\~297mg/dL$ of glucose: the correlation coefficient value was 0.983. It can be seen that the strip sensor has satisfactory precision and accuracy.

Carbon paste전극을 백금도금 한 후 이 전극을 사용한 일회용 전류법 glucose센서를 제작하였다. 전극에 시료용액을 가한 후, voltammetry을 이용하여 본 센서의 감응성을 연구하였다. screen printing된 carbon paste전극 표면 위에 전기도금 방법으로 도입된 백금은 센서의 분석성능과 mediator의 전기 화학적 가역성을 크게 향상시켜 준다. 제작된 센서가 $[Fe(CN)_6]^{4-/3-}$에 대한 heterogeneous rate constant는 $1.45\times10^{-2}cm{\cdot}s^{-1}$이며, 이 센서는 적용전위 0.3V vs. Ag/AgCl에서 glucose에 대한 좋은 감응성을 보여주었다. 이 때 glucose에 대한 Michaelis-Menten상수는 24.5mM이다. 일회용 glucose 스트립 센서의 분석성능을 평가하기 위하여 NOVA S.P. Ultra M analyzer와 비교실험을 수행하였다. 이 때 시료용액으로서 $80\~297 mg/dL$ 범위의 glucose를 함유하고 있는 30여 종류의 혈청을 사용하였고, 상관계수는 0.983으로서 정밀도와 정확도가 비교적 우수함을 보여주었다.

Keywords