초록
Pd를 지지체에 담지시킨 촉매($Pd/AlF_3$, $Pd/{\gamma}-Al_2O_3$)와 고체산촉매(${\gamma}-Al_2O_3$, ${\alpha}-Al_2O_3$, $AlF_3$)를 제조한 후 수소분위기에서 HCFC-142b(1-chloro-1,1-difluoroethane)의 탈염소반응을 수행하여 반응온도, 수소/HCFC-142b의 공급비(r) 및 Pd담지량 변화가 HFC-143a(1,1,1-trifluoroethane)와 HFC-152a(1,1-difluoroethane)로의 선택도에 미치는 영향을 조사하였다. 실험결과 $Pd/AlF_3$와 $Pd/{\gamma}-Al_2O_3$촉매에 의한 전환율은 각각 60%와 92%였고, 생성가스 중에서 HFC-143a로의 선택도는 각각 58%와 64%였다. 이때 최적반응조건은 반응온도, $200^{\circ}C$, 공간시간 1.05s, 수소/HCFC-142b의 공급비가 3이었다. 한편, 동일 조건하에서 ${\gamma}-Al_2O_3$와 ${\alpha}-Al_2O_3$, 그리고 $AlF_3$촉매에 의한 HCFC-142b의 생성가스로의 전환율은 각각 12%, 8%와 7%였고, 생성가스중 HFC-152a로의 선택도는 각각 94%, 92%와 90%였다.
Supported Pd($Pd/AlF_3$, $Pd/{\gamma}-Al_2O_3$) catalysts and solid-acid catalysts(${\gamma}-Al_2O_3$, ${\alpha}-Al_2O_3$, $AlF_3$) were used to perform dechlorination of HCFC-142b(1-chloro-1,1-difluoroethane) in the presence of excess hydrogen. In the reactions the effects of reaction temperature, the mole ratio(r) of $H_2$ to HCFC-142b and the amount of supported Pd on dechlorination of HCFC-142b into HFC-143a(1,1,1-trifluoroethane) or HFC-152a(1,1-difluoroethane) were investigated. The experimental results showed that the conversion of HCFC-142b to product gases were 60% and 92%, respectively, and the selectivity to HFC-143a in the product gases were 58% and 64% for $Pd/AlF_3$ and $Pd/{\gamma}-Al_2O_3$ catalysts, respectively. On these catalysts an optimum reaction condition was found at $200^{\circ}C$ with the space time of reactant gases as 1.05 second and the mole ratio of $H_2$ to HCFC-142b as 3. Solid-acid catalysts were also tested at the same reaction condition. The results showed that the conversions of HCFC-142b to product gases were 12%, 8% and 7%, and the selectivities to HFC-152a were 94%, 92% and 90% for ${\gamma}-Al_2O_3$, ${\alpha}-Al_2O_3$ and $AlF_3$ catalysts, respectively.