대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)
- 제36권4호
- /
- Pages.549-565
- /
- 1998
- /
- 0301-2875(pISSN)
- /
- 2005-3789(eISSN)
글레이징처리한 도재와 연마한 도재의 표면조도에 관한 연구
A STUDY ON THE SURFACE ROUGHNESS OF GLAZED PORCELAIN AND POLISHED PORCELAIN
- Choi, Mee-Ra (Department of Prosthodontics, School of Dentistry, Seoul National University) ;
- Chung, Hun-Young (Department of Prosthodontics, School of Dentistry, Seoul National University) ;
- Lee, Sun-Hyeong (Department of Prosthodontics, School of Dentistry, Seoul National University) ;
-
Yang, Jae-Ho
(Department of Prosthodontics, School of Dentistry, Seoul National University)
- 발행 : 1998.08.01
초록
Porcelain is considered to be one of the materials of choice for restoration where esthetics is of concern. But porcelain surface without final glazing treatment may induce undesirable results such as inflammatory response on adjacent soft tissues due to plaque accumulation and increased wear of opposing teeth. Therefore, rough porcelain surface must be smoothened by final glazing treatment or chairside polishing procedure. The purpose of this study was to compare the surface roughness among self-glazed, overglazed and polished porcelain with various polishing kit, and to detect which phase of polishing is optimal in clinic. Specimens were fabricated with Vita VMK porcelain. The surface treatment of each group was performed as follows. Group 1 : overglazing treatment Group 2 : self-glazing treatment Group 3 : polishing with the Truluster Polishing System for Porcelain(Brasseler, U.S.A.) Group 4 : polishing with the Exa Cerapol Adjustment kit (Edenta dental products, Switzerland) followed by finishing with diamond-filled polishing paste Group 5 : polishing with the Shofu Porcelain Adjustment kit (Shofu inc., Japan) followed by finishing with diamond-filled polishing paste. At each polishing steps, the measurement of Ra and Rq values were performed, and the surface was examined by scanning electron microscope. The results were as follows : 1. Overglazing treatment brought smoother surface than self-glazing treatment. 2. Polishing systems without porcelain polishing paste did not make better result than self-glazing treatment. 3. Polishing system with porcelain polishing paste made similar result to overglazing treatment. 4. Applying diamond-filled polishing paste after using polishing system which has no porcelain polishing paste produced surface as smooth as overglazing treatment does.