Wind and Structures

  • 제1권3호
  • /
  • Pages.255-269
  • /
  • 1998
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Moment-curvature relationships to estimate deflections and second-order moments in wind-loaded RC chimneys and towers

  • Menon, Devdas (Department of Civil Engineering, Indian Institute of Technology)
  • 발행 : 1998.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Second-order moments of considerable magnitude arise in tall and slender RC chimneys and towers subject to along-wind loading, on account of eccentricities in the distributed self-weight of the tower in the deflected profile. An accurate solution to this problem of geometric nonlinearity is rendered difficult by the uncertainties in estimating the flexural rigidity of the tower, due to variable cracking of concrete and the 'tension stiffening' effect. This paper presents a rigorous procedure for estimating deflections and second-order moments in wind-loaded RC tubular towers. The procedure is essentially based on a generalised formulation of moment-curvature relationships for RC tubular towers, derived from the experimental and theoretical studies reported by Schlaich et al. 1979 and Menon 1994 respectively. The paper also demonstrates the application of the proposed procedure, and highlights those conditions wherein second-order moments become too significant to be overlooked in design.

키워드

참고문헌

  1. ACI 318R (1989). Commentary on Building Code Requirements for Reinforced Concrete ACI 318-89, American Concrete Institute, Detroit, Michigan.
  2. ACI 307 (1988). Standard Practice for the Design and Construction of Cast-in-place Reinforced Concrete Chimneys (ACI 307-88) and Commentary (ACI 307R-88), American Concrete Institute, Detroit, Michigan.
  3. Beeby, A.W. and Miles, J.R. (1969), "Proposals for the control of deflection in the new unified code" , Concrete, 3(3), 101-110.
  4. Branson, D.E. (1977). Deformation of Concrete Structures, McGraw-Hill Inc., New York.
  5. BS 8110 (1985). "Structural use of concrete: Part 2: Code of practice for special circumstances", British Standards Institution, London.
  6. CICIND (1984). "Model code for concrete chimneys - Part A: The shell", Comite International des Chimnees Industrielle, Zurich.
  7. DIN 1056 (1984). "Solid construction, free-standing stacks: Calculation and design" , Deutsches Institut fur Nonnung, Germany.
  8. IS 4998 (1992). "Indian standard practice for design of reinforced concrete chimneys: Part I: Design criteria (First Revision)" , Bureau of Indian Standards, New Delhi.
  9. Kaemmer, K., Schueller, G.I. and Pradlwarter, H.J. (1989), "Influence of nonlinearities in oscillations on along-wind gust response of RC chimneys", Engineering Structures, 11, 69-74. https://doi.org/10.1016/0141-0296(89)90015-1
  10. Menon, D. (1994). "Reliability of wind-resistant design of tubular RC towers", PhD Thesis, Dept of Civil Engrg, Indian Institute of Technology, Madras.
  11. Menon, D. and Rao, P.S. (1997a), "Estimation of along-wind moments in RC chimneys", Engineering Structures, 19(1), 71-78. https://doi.org/10.1016/S0141-0296(96)00041-7
  12. Menon, D. and Rao, P.S. (1997b), "Uncertainties in codal recommendations for across-wind load analysis of RC chimneys" , J. Wind Engrg and Industrial Aerodynamics, 72(3), 455-468. https://doi.org/10.1016/S0167-6105(97)00267-5
  13. Menon, D. and Rao, P.S. (1998), "Reliability of wind-resistant design of tubular reinforced concrete towers", J. Struct. Engrg, SERC, 25(4), 21-29.
  14. Menon, D. and Reddy, Y.N. (1998), "Finite element modelling of tall slender tubular towers", J. Struct. Engrg, SERC, 24(1), 243-246.
  15. Mokrin, Z.A.R. and Rumman, W.S. (1985), "Ultimate capacity of reinforced concrete members of hollow circular sections subjected to monotonic and cyclic bending" , ACI Journal, 82, 653-656.
  16. Naokowski, P. (1981), "Simplified determination of the moments of second-order in industrual chimneys" , Proceedings of the Fourth International Symposium on Industrial Chimneys, The Hague, Netherlands, May.
  17. Naokowski, P. and Gerstle, K.H. (1990), "Tower structures subjected to temperature and wind", ACI Structural Journal, 87(4), 479-487.
  18. Pillai, S.U. and Menon, D. (1998). Reinforced Concrete Design, Tata McGraw-Hill, New Delhi, 333- 374.
  19. Pinfold, G.M. (1984). Reinforced Concrete Chimneys and Towers, Viewpoint Publication, second edition.
  20. Prakhya, G.K.V., and Morely, C.T. (1990), "Tension stiffening and moment-curvature relations of reinforced concrete elements" , ACI Structural Journal, 87(9), 597-602.
  21. Rao, P.S. and Subrahmanyam, B.V. (1973), "Trisegmental moment-curvature relations for reinforced concrete members", ACI Journal, 70(5), 346-352.
  22. Rao, P.S and Menon, D. (1995), "Ultimate strength of tubular RC tower sections under wind loading", Indian Concrete Journal, 69(2), 117-123.
  23. Sakai, K. and Kakuta, Y. (1980), "Moment-curvature relationships of reinforced concrete members subjected to combined bending and axial force", ACI Journal, 77(5), 189-194.
  24. Schlaich, J., Schober, H. and Koch, R. (1979). Versuche zur Mitwirkung des Betons in der Zug-zone von Stahlbetonrohren, Bericht des Instituts fur Massivbau der Univeristat Stuttgart.
  25. Yu, W.W., and Winter, G. (1960), "Instantaneous and long-time deflections of reinforced concrete beams under working loads" , ACI Journal, 57(1), 29-50.