DOI QR코드

DOI QR Code

On wind resistant properties of Tiger Gate suspension bridge

  • Xiang, H.F. (Department of Bridge Engineering, Tongji University) ;
  • Chen, A.R. (Department of Bridge Engineering, Tongji University) ;
  • Song, J.Z. (Department of Bridge Engineering, Tongji University)
  • 발행 : 1998.03.25

초록

Tiger Gate Bridge, a steel suspension bridge with a main span of 888 m and a stiffening box girder, is located at the Pearl River Estuary, Guangdong Province, one of the typhoon-prone area in China. Focusing on the developing of the full aeroelastic model of the bridge and simulation of the wind field of the bridge site in a large boundary wind tunnel at Tongji University, Shanghai, China, some main results about the wind resistant properties of the bridge including aerodynamic instability, buffeting responses both being in operation and erection stages by using of a full aeroelastic model wind tunnel testing are introduced. Some of analytical approaches to those aerodynamic behaviours are also presented, and compared with experimental data of the testing.

키워드

참고문헌

  1. Miyata T. (1995), "Full model testing of large cable-supported bridges" , A State of the Art in Wind Engineering, Ninth International Conference on Wind Engineering, New Delhi.
  2. Xiang. H. F, Lin, Z. X and Chen, A. R (1996) Wind Resistance Design Guideline for Highway Bridges, People's Communication Press House of China.
  3. Xiang H. F. (1995) "Buffeting response analysis and control of long-span bridges" , A State of the Art in Wind Engineering, Ninth International Conference on Wind Engineering, New Delhi.
  4. Xiang, H. F., Chen, A. R. and Lin, Z. X. (1997), An intorduction to the Chinese Wind Resistant Design Guideline of Highway Bridges", Proceeding of 2nd European and African Conference on Wind Engineering,, Genova, Italy, June.

피인용 문헌

  1. Flutter performance optimization of steel truss girder with double-decks by wind tunnel tests 2017, https://doi.org/10.1177/1369433217734637
  2. Full-order and multimode flutter analysis using ANSYS vol.44, pp.9-10, 2008, https://doi.org/10.1016/j.finel.2008.01.011