Structural Engineering and Mechanics

  • 제6권7호
  • /
  • Pages.817-826
  • /
  • 1998
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Finite element application of an incremental endochronic model to flexible pavement materials

  • Kerh, Tienfuan (Department of Civil Engineering, National Pingtung University of Science and Technology) ;
  • Huang, C.Y. (Department of Civil Engineering, National Pingtung University of Science and Technology)
  • 발행 : 1998.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

A finite element model based on the incremental endochronic theory for flexible pavement materials was developed in this study. Three grid systems with eight-node cubic isoparametric elements, and different loading steps were used to perform the calculations for a specimen of circular cylinder. The uniaxial stress experimental results on an asphalt mixture at $60^{\circ}C$ in SHRP conducted by University of California at Berkeley were used to check the ability of the derived numerical model. Then, the numerical results showed isotropic response and deviatoric response on the specimen in a three dimensional manner, which provided a better understanding for a deformed flexible material under the specified loading conditions.

키워드

참고문헌

  1. Henrinksen, M. (1984), "Nonlinear viscoelastic stress analysis-a finite element apporach", Computers and Structures, 18, 133-139. https://doi.org/10.1016/0045-7949(84)90088-9
  2. Lee, C.F. (1995), "Recent finite element applications of the incremental endochronic plasticity", Int. I. Plasticity, 11(7), 843-865. https://doi.org/10.1016/S0749-6419(95)00034-8
  3. Liu, M.L. (1993), "The structure response of pavement by using the hypoelastic model", The 17th Nat. Conf. Theo. Appl. Mech., Taiwan, 761-768.
  4. Liu, M.L. (1994), "The use of hypo elastic constitutive model for asphalt concrete materials", Int. Compu. Meth. Strue. Geot. Engng., Hong Kong, 659-700.
  5. Row, G.M., Brown, S.F. and Bouldin, M.J. (1995), "Visco-elastic analysis of hot mix asphalt pavement structures", Transportation Research Board 74th Annual Meeting, Washington D.C., Paper No. 95-0617.
  6. SHRP Project (1991), "Performance-related testing and measuring of asphalt-aggregate interaction and mixtures", Quarterly Report, Part I-Technical Section, Institute of Transportation Studies, Asphalt Research Program, U.C. Berkeley, California, QR-UCB-A-003A-91-2.
  7. Sugiura, K., Lee, G.C., and Wang, K.C. (1987), "Endochronic theory for structure steel under nonpropotional loading", J. Engng. Mech, 113(12), 1901-1917, ASCE. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:12(1901)
  8. Valanis, K.C. (1971), "A theory of viscoplasticity without a yield surface, part i. general theory, part ii application to mechanical behavior of metals", Arch. Mech., 23, 511-517.
  9. Valanis, K.C. (1980), "Fundamental consequence of a new intrinsic time measure: plasticity as a limit of the endochronic theory", Arch. Mech., 32, 171-191.
  10. Valanis, K.C. and Fan, J. (1984), "A numerical algorithm for endochronic plasticity and comparison with experiment", Computers and Structures, 19, 717-724. https://doi.org/10.1016/0045-7949(84)90171-8
  11. Valanis, K.C. and Lee, C.F. (1984), "Endochronic theory of cyclic plasticity with application", Trans. ASME, J Appl. Mech., 51, 367. https://doi.org/10.1115/1.3167627
  12. Watanabe, O. and Atluri, S.N. (1986), "Internal time, general internal variable, andm multi-yieldsurface theories of plasticity and creep: a unification of concepts", Int. J. Plasticity, 2, 37-57. https://doi.org/10.1016/0749-6419(86)90015-X
  13. Wu, H.C. and Aboutorabi, M.R. (1988), "Endochronic modeling of coupled volumetric-deviatoric behavior of porous and granular materials", Int. J. Plasticity, 4, 163-181. https://doi.org/10.1016/0749-6419(88)90019-8
  14. Wu, H.C. and Komarakulnanakorn, C. (1992), "On the limit case of endochronic theory", Int. J. Solids and Structures, 29(2), 135-143. https://doi.org/10.1016/0020-7683(92)90103-Z
  15. Wu, H.C. and Lu, J.K. (1995), "Further development and application of an endochronic theory accounted for deformation induced anisotropy", Acta Mechanica, 109, 11-26. https://doi.org/10.1007/BF01176813
  16. Wu, H.C. and Wang, P.T. (1983), "Endochronic description of sand response to static loading", J. Engng. Mech., 109, 970-989, ASCE. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:4(970)
  17. Wu, H.C., Wang, P.T., Pan, W.F. and Xu, Z.Y. (1990), "Cyclic stress response of porous aluminum", Int. J. Plasticity, 6, 207-230. https://doi.org/10.1016/0749-6419(90)90022-7

피인용 문헌

  1. Development of finite element model using incremental endochronic theory for temperature sensitive material vol.16, pp.2, 2003, https://doi.org/10.12989/sem.2003.16.2.115