Structural Engineering and Mechanics

  • 제6권4호
  • /
  • Pages.363-375
  • /
  • 1998
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Contact surface element method for two-dimensional elastic contact problems

  • Liu, Zhengxing (Department of Engineering Mechanics, Shanghai Jiao Tong University) ;
  • Yang, Yaowen (Department of Engineering Mechanics, Shanghai Jiao Tong University) ;
  • Williams, F.W. (Division of Structural Engineering, Cardiff School of Engineering, University of Wales Cardiff) ;
  • Jemah, A.K. (Division of Structural Engineering, Cardiff School of Engineering, University of Wales Cardiff)
  • 발행 : 1998.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The stiffness matrix of a two-dimensional contact surface element is deduced from the principle of virtual work. The incremental loading procedure used is controlled by displacement and stress. Special potential contact elements are used to avoid the need to rearrange the FEM mesh due to variations of the contact surface as contact develops. Published results are used to validate the method, which is then applied to a turbine to solve the contact problem between the blade root and rotor in the region in which a 'push fit' connects the blade to its rotor.

키워드

참고문헌

  1. Cai, Z.X. and Liao, C.L. (1993), "Two-dimensional contact stress analysis using mixed finite element method", J. of Taiwan Mechanics Association, 9(4), 319-330. (in Chinese)
  2. Chen, M.Q. (1983), "Solution of elasto-plastic contact problems using quasi-elastic summation and double-iteration", J. of Solid Mechanics, 3, 365-374. (in Chinese)
  3. Chen, W.J. (1981), "An analysis of coupled thermal-elastic contact problems with the finite element method", J. of Solid Mechanics, 3, 326-336. (in Chinese)
  4. Fredriksson, B. (1976), "Finite element solution of surface nonlinearities in structural mechanics with special emphasis to contact and fracture mechanics problems", Computers & Structures, 6, 281-290. https://doi.org/10.1016/0045-7949(76)90003-1
  5. Garrido, J.A., Foces, A. and Paris, F. (1994), "An incremental procedure for three-dimensional contact problems with friction", Computers & Structures, 50(2), 201-215. https://doi.org/10.1016/0045-7949(94)90296-8
  6. Gladwell, G.M.L. (1980), Contact Problems in the Classical Theory of Elasticity, Sijthoff and Noordogg.
  7. Haslinger, J. and Hlavacek, I. (1982), "Approximation of the Signorini problem with friction by a mixed finite element method", J. Math. Analys. Appl., 86, 99-122. https://doi.org/10.1016/0022-247X(82)90257-8
  8. Im, S.B. and Kawk, B.M. (1993), "Sensitivity analysis for automatic loading in frictional contact formulated by complementarity", Computers & Structures, 46(2), 355-364. https://doi.org/10.1016/0045-7949(93)90200-W
  9. Kikuchi, N. (1982), "A smoothing technique for reduced integration penalty methods in contact problem", Int. J. Num. Eng., 18, 343-350. https://doi.org/10.1002/nme.1620180303
  10. Man, K.W., Aliabadi, M.H. and Rooke, D.P. (1993), "BEM frictional contact analysis: load incremental technique", Computers & Structures, 47(6), 893-905. https://doi.org/10.1016/0045-7949(93)90294-N
  11. Oden, J.T. and Pires, E.B. (1983), "Nonlocal and nonlinear friction laws and variational principles for contact problems in elasticity", J. Appl. Mechs. Trans. ASME, 50, 67-76. https://doi.org/10.1115/1.3167019
  12. Okamoto, N. and Nakazawa, M. (1979), "Finite element incremental contact analysis with various frictional conditions", Int. J. Num. Meth. Eng., 14, 337-357. https://doi.org/10.1002/nme.1620140304
  13. Papadopoulos, P. and Taylor, R.L. (1993), "A simple algorithm for three-dimensional finite element analysis of contact problems", Computers & Structures, 46(6), 1107-1118. https://doi.org/10.1016/0045-7949(93)90096-V
  14. Paris, F., Foces A. and Garrido, J.A. (1992), "Application of boundary element method to solve three-dimensional elastic contact problems without friction", Computers & Structures, 43(1), 19-30. https://doi.org/10.1016/0045-7949(92)90076-C
  15. Rahman, M.U. (1984), "An iterative procedure for finite element stress analysis of frictional contact problems", Computers & Structures, 18(6), 947-954. https://doi.org/10.1016/0045-7949(84)90138-X
  16. Tan, L.S. and Sha, X.H. (1984), "Finite element analysis of elastic contact problem of axisymmetric opening in spherical shell", J. of Solid Mechanics, 2, 262-268. (in Chinese)
  17. Torstenfelt, B.R. (1984), "An automatic incrementation technique for contact problems with friction", Computers & Structures, 19(3), 393-400. https://doi.org/10.1016/0045-7949(84)90048-8
  18. Tseng, J. and Olson, M.D. (1981), "The mixed finite element method applied to two-dimensional elastic contact problems", Int. J. Num. Meth. Eng., 17, 991-1014. https://doi.org/10.1002/nme.1620170705
  19. Zhong, W.X. (1985a), "The minimum potential energy principle in elastic contact problems and its numerical method", Comput. Struct. Mech. and Appl., 2(1), 21-29. (in Chinese)
  20. Zhong, W.X. (1985b), "On variation principle of elastic contact problems and parametric quadratic programming solution", Comput. Struct. Meck. and Appl., 2(2), 1-10. (in Chinese)
  21. Zhong, W.X. and Sun, S.M. (1989), "A parametric quadratic programming approach to elastic contact problems with friction", Computers & Structures, 32(1), 37-43. https://doi.org/10.1016/0045-7949(89)90066-7
  22. Tophob, M. (1965), Calculation of Structures on Elastic Foundation, China Industry Press.

피인용 문헌

  1. Characterization of the effect of joint clearance on the energy loss of flexible multibody systems with variable kinematic structure vol.63, pp.5, 1998, https://doi.org/10.12989/sem.2017.63.5.691