DOI QR코드

DOI QR Code

Endochronic prediction for the mechanical ratchetting of a stepped beam subjected to steady tension and cyclic bending

  • Pan, W. F. (Department of Engineering Science, National Cheng Kung University) ;
  • Yang, Y. S. (Department of Engineering Science, National Cheng Kung University) ;
  • Lu, J. K. (Department of Civil Engineering, National Pingtung Polytechnic Institute)
  • 발행 : 1998.04.25

초록

In this paper, the first-order ordinary differential constitutive equations of endochronic theory are incorporated into finite element formalism. A theoretical investigation is performed on the ratchetting effect of a stepped beam subjected to steady tension and cyclic bending. Experimental data of lead alloy found in literature are used for comparison. Those data reveal that the endochronic prediction yields more adequate results than those predictions using the plasticity models with isotropic hardening or kinematic hardening, as employed by Hardy, et al. (1985).

키워드

과제정보

연구 과제 주관 기관 : National Science Council

참고문헌

  1. Bazant, Z.P. and Bhat, P.D. (1976), "Endochronic theory of inelasticity and failure for concrete", J. Engng. Mech. Div., Proc. ASME, 102, EM4, 701-722.
  2. Fan, J. (1983), "A comprehensive numerical study and experimental verification of endochronic plasticity", Ph. D. Dissertation, Department of Aerospace Engineering and Applied Mechanics, University of Cincinnati.
  3. Fan J. and Peng X. (1991), "A physically based constitutive description for nonproportional cyclic plasticity", J. Engng. Mater. Tech., 113, 254-262. https://doi.org/10.1115/1.2903400
  4. Fessler, H. and Hyde, T.H. (1985), "Ratchetting tests of a stepped beam under steady tension and cycling bending", J. Strain Analysis, 20(4), 193-200. https://doi.org/10.1243/03093247V204193
  5. Goodman, A.M. and Goodall, I.W. (1981), "Constitutive relations for stainless steels", Metals Society Conference, Varese.
  6. Hardy, S.J., Webster, J.J. and Hyde, T.H. (1985), "An assessment of simple material behaviour models for predicting the mechanical ratchetting of a stepped beam", J. Strain Analysis, 20(2), 63-78. https://doi.org/10.1243/03093247V202063
  7. Hyde, T.H., Sahari, B.B. Sahari. and Webster, J.J. (1985), "The effect of material ratchetting on the incremental growth of beams subjected to steady axial loads and cycle bending", Int. J. Mech. Sci., 27(4), 207-223. https://doi.org/10.1016/0020-7403(85)90080-3
  8. Imai, G. and Xie, C. (1990), "An endochronic constitutive law for static shear behavior of overconsolidated clays", Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, 30(1), 65-75.
  9. Mathison, S.R., Pindera, M.J. and Herakovich, C.T. (1991), "Nonlinear response of resin matrix laminates using endochronic theory", J. Engng. Mater. Tech., 113, 449-455. https://doi.org/10.1115/1.2904125
  10. Murakami, H. and Read, H.E. (1989), "A second-order numerical scheme for integrating the endochronic plasticity equations", Computers and Structures, 31, 663-672. https://doi.org/10.1016/0045-7949(89)90200-9
  11. Valanis, K.C. (1971), "A theory of viscoplasticity without a yield surface, Part I-general theory; Part II-application to mechanical behavior of metals", Archive Mechanics, 25, 517-551.
  12. Valanis, K.C. (1980), "Fundamental consequence of a new intrinsic time measure-plasticity as a limit of the endochronic theory", Archive Mechanics, 32, 171-191.
  13. Valanis, K.C. and Fan, J. (1983), "Endochronic analysis of cyclic elastoplastic strain fields in a notched plate", J. Appl. Mech., 50, 789-794. https://doi.org/10.1115/1.3167147
  14. Valanis, K.C. and Lee, C.F. (1984), "Endochronic theory of cyclic plasticity with applications", J. Appl. Mech., 51, 367-374. https://doi.org/10.1115/1.3167627
  15. Valanis, K.C. and Read, H.E. (1986), "An endochronic plasticity theory for concrete", Mech. Mater., 5, 277-295. https://doi.org/10.1016/0167-6636(86)90024-4
  16. Watanabe, O. and Atluri, S.N. (1985), "A new endochronic approach to computational elasto-plasticity: and example of cyclically loaded cracked plate", J. Appl. Mech., 52, 857-864. https://doi.org/10.1115/1.3169159
  17. Wu, H.C. and Yip, M.C. (1981), "Endochronic description of cyclic hardening behavior for metallic material", J. Engng. Mat. Tech., 103, 212-217. https://doi.org/10.1115/1.3225003
  18. Wu, H.C. and Aboutorabi, M.R. (1988), "Endochronic model of sand with circular stress path", J. Geotech. Engng., 114(1), 95-105.
  19. Wu, H.C., Wang, T.P., Pan, W.F. and Xu, Z.Y. (1990), "Cyclic stress-strain response of porous aluminum", Int. J. Plasticity, 6, 207-230. https://doi.org/10.1016/0749-6419(90)90022-7

피인용 문헌

  1. Application of softened truss model with plastic approach to reinforced concrete beams in torsion vol.11, pp.4, 2001, https://doi.org/10.12989/sem.2001.11.4.393