DOI QR코드

DOI QR Code

Temperature-time analysis for steel structures under fire conditions

  • Wong, M.B. (Monash University) ;
  • Ghojel, J.I. (Monash University) ;
  • Crozier, D.A. (Monash University)
  • 발행 : 1998.04.25

초록

The objective of the paper is to present a method whereby the time required for a steel structure to sustain the effects of a prescribed temperature rise according to real fire curves can be calculated. The method is divided into two parts. The first part deals with the post-yield behaviour of steel structures at elevated temperatures. It takes into account the variation of the properties of steel material with temperature in an incremental elastoplastic analysis so that the safety factor of the structure under certain fire conditions can be assessed. The second part deals with the heat transfer problem of bare steel members in real fire. Factors affecting the heat transfer process are examined and a model for predicting the temperature variation with time under real fire conditions is proposed. This model results in more accurate temperature predictions for steel members than those obtained from previously adopted model.

키워드

참고문헌

  1. Barthelemy, B. (1976), "Heating calculation of structural steel members", J. St. Div., ASCE, 102(8), 1549-1558.
  2. British Iron and Steel Research Association (1952), Physical Constants of Steels at Elevated Temperature, BISRA.
  3. BSI (1995), "Eurocode 3-Design of steel structures, Part 1.2: General rules-Structural fire design".
  4. Brockenbrough, R.L. (1970), "Theoretical stresses and strains from heat curving", J. St. Div., ASCE, 96(7), 1421-1444.
  5. Chiou, Y.J., Tam, J.Q., Chen, J.M. and Chung, Y.C. (1991), "A numerical model for the fire response of steel structures", J. Chin. Inst. Engrg., 14(4), 397-406. https://doi.org/10.1080/02533839.1991.9677351
  6. CIB (1983), Design Guide Structural Fire Safety, Fire Commission of the Conseil International du Batiment, Workshop CIB W14.
  7. Crozier, D.A. and Wong, M.B. (1994), "Collapse temperature analysis of steel frames", Proceedings of the Australasian Structural Engineering Conference, Sydney, September, 1005-1010.
  8. Crozier, D.A. and Wong, M.B. (1995), "A solution for elastoplastic analysis of structures under uniformly distributed loads", Proceedings of the Fifth East Asia-Pacific Conference on Structural Engineering & Construction, Gold Coast, Australia, July, 91-96.
  9. CTICM (1982), "Methode de prevision par le calcule du comportement au feu des structures en acier", Construction Metallique, 19(3), 39-79.
  10. ECCS (1983), European Recommendation for the Fire Safety of Steel Structures ECCS Technical Committee 3 - Fire Safety of Steel Structures, Elsevier, Amsterdam.
  11. Edwards, D.K. and Matavosian, R. (1984), "Scaling rules for total absorptivity and emissivity of gases", J. Heat Transfer, 106, 684-689. https://doi.org/10.1115/1.3246739
  12. Edwards, D.K. and Matavosian, R. (1990), "Emissivity data for gases", Section 5.5.5, Hemisphere Handbook of Heat Exchanger Design, Ed, G.J. Hewitt, Hemisphere, New York.
  13. Holman, J.P. (1986), Heat Transfer, McGraw Hill.
  14. Iding, R. and Bresler, B. (1984), "Prediction of fire response of buildings using finite element methods", Proceedings of The Third Conference, Computing in Civil Engineering, San Diego, April.
  15. Kirby, B.R. and Preston, R.R. (1988), "High temperature properties of hot-rolled, structural steels for use in fire engineering design studies", Fire Safety Journal, 13, 27-37. https://doi.org/10.1016/0379-7112(88)90030-6
  16. Lie, T.T. (1992), Structural Fire Protection, ASCE Manuals and Reports on Engineering Practice No. 78.
  17. Mills, A.F. (1992), Heat Transfer, Irwin Inc., 555-579.
  18. Olawale, A.O. and Plank, R.J. (1988), "The collapse analysis of steel columns in fire using a finite strip method", Int. J. Num. Meth. Engrg., 26(12), 2755-2764. https://doi.org/10.1002/nme.1620261212
  19. Saab, H.A. and Nethercot, D.A. (1991), "Modelling steel frame behaviour under fire conditions", Eng. St., 13, 371-382. https://doi.org/10.1016/0141-0296(91)90024-7
  20. Schleich, J.B., Dotreppe, J.C. and Franssen, J.M. (1985), "Numerical simulations of fire resistance tests on steel and composite structural elements or frames", Proceedings of the First International Symposium, Fire Safety Science, Oct., 311-323.
  21. Smith, C.I. and Stirland, C. (1983), "Analytical methods and the design of steel framed buildings", International Seminar on three Decades of Structural Fire Safety, Fire Research Station, Herts, UK, 155-200.
  22. Standards Australia (1990), AS4100 - 1990, Standards Australia, SA.
  23. Tin-Loi, F. and Wong, M.B. (1989), "Nonholonomic computer analysis of elastoplastic frames", Comp. Meth. Appl. Mech. Engrg., 72, 351-364. https://doi.org/10.1016/0045-7825(89)90004-2
  24. Ueda, Y., Rashed, S.M.H. and Nakacho, K. (1985), "New efficient and accurate method of nonlinear analysis of offshore tubular frames (the Idealized Structural Unit)", J. of Energy Resources Technology, ASME, 107, 204-211. https://doi.org/10.1115/1.3231178
  25. Wong, M.B. (1991), "Direct analytical methods for plastic design", Aust. Civil Eng. Trans., CE33(2), 81-86.
  26. Wong, M.B. (1995), "Foundation settlement and its effects on the inelastic behaviour of structures", Proceedings of the Fourth International Conference on Structural Studies of Historical Buildings, Greece, May, 137-144.

피인용 문헌

  1. Effect of Torsion on Limiting Temperature of Steel Structures in Fire vol.132, pp.5, 2006, https://doi.org/10.1061/(ASCE)0733-9445(2006)132:5(726)
  2. Plastic Limit Temperatures of Flexibly Connected Steel Frames: A Linear Programming Problem vol.129, pp.1, 2003, https://doi.org/10.1061/(ASCE)0733-9445(2003)129:1(79)
  3. Modelling of axial restraints for limiting temperature calculation of steel members in fire vol.61, pp.5, 2005, https://doi.org/10.1016/j.jcsr.2004.10.003
  4. Behaviour of cold-formed stainless steel beams at elevated temperatures vol.9, pp.11, 2008, https://doi.org/10.1631/jzus.A0820285
  5. Visco-Elasto-Plastic Analysis of Steel Frames in Fire vol.128, pp.1, 2002, https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(105)
  6. Nonlinear Elastoplastic Analysis of Semirigid Steel Frames at Elevated Temperature: MP Approach vol.129, pp.5, 2003, https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(661)
  7. Temperature development in structural stainless steel sections exposed to fire vol.41, pp.3, 2006, https://doi.org/10.1016/j.firesaf.2005.11.009
  8. Heat transfer: a review of 1998 literature vol.44, pp.2, 2001, https://doi.org/10.1016/S0017-9310(00)00117-4
  9. Plastic Frame Analysis under Fire Conditions vol.127, pp.3, 2001, https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(290)
  10. Elastic and plastic methods for numerical modelling of steel structures subject to fire vol.57, pp.1, 2001, https://doi.org/10.1016/S0143-974X(00)00012-2
  11. Experimental Investigation of Emissivity of Steel vol.34, pp.3, 2013, https://doi.org/10.1007/s10765-013-1421-3
  12. Size Effect on Temperatures of Structural Steel in Fire vol.131, pp.1, 2005, https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(16)
  13. Sensitivity analysis of heat transfer formulations for insulated structural steel components vol.38, pp.2, 2003, https://doi.org/10.1016/S0379-7112(02)00057-7
  14. Spreadsheet method for temperature calculation of unprotected steelwork subject to fire vol.12, pp.2, 2003, https://doi.org/10.1002/tal.214
  15. Three-sided heating of I-beams in composite construction exposed to fire vol.61, pp.6, 2005, https://doi.org/10.1016/j.jcsr.2004.11.006
  16. A new approach to modeling heat transfer in compartment fires vol.31, pp.3, 1998, https://doi.org/10.1016/s0379-7112(98)00010-1
  17. Behaviour and design of duplex stainless steel CHS stub columns at elevated temperature vol.4, pp.2, 1998, https://doi.org/10.1002/cepa.1471