DOI QR코드

DOI QR Code

Lateral buckling of reinforced concrete beams without lateral support

  • Aydin, Ruhi (Department of Civil Engineering, Osmangazi University, Engineering & Architecture Faculty) ;
  • Kirac, Nevzat (Department of Civil Engineering, Osmangazi University, Engineering & Architecture Faculty)
  • 발행 : 1998.03.25

초록

Reinforced concrete beams possess variable flexural and torsional stiffnesses due to formation of cracks in the tension area along the beam. In order to check the stability of the beam, it is thus more appropriate to divide the beam into a finite number of segments for which mean stiffnesses and also bending moments are calculated. The stability analysis is further simplified, by using these mean values for each segment. In this paper, an algorithm for calculating the critical lateral buckling slenderness ratio for a definite load level, in a reinforced concrete beam without lateral support at the flanges, is presented. By using this ratio, the lateral buckling safety level of a slender beam may be checked or estimated.

키워드

참고문헌

  1. Aydin, R. (1990), "Nonlinear analysis of structural systems and application to reinforced concrete structures", J. Engrg. and Arch. Fac, 6(1) 65-95, Eskisehir (In Turkish).
  2. Aydin, R. (1992), "Lateral buckling of reinforced concrete simple supported beams without lateral support", J. Engrg. and Arch. Fac., 8(1), 1-32, Eskisehir (In Turkish).
  3. Building code requirements for reinforced concrete (1989), ACI 318,89, American Concrete Institute, Detroit, Michigan.
  4. CEB-FIB (1990), "Model code for concrete structures", Comite Euro-International du Beton-Federation Internationale de la Precontrainte, Lausanne.
  5. Deneke, O., Holz, K. and Litzner, U. (1985), "A survey of practical methods of checking the lateral stability of slender reinforced or prestressed concrete beams", Stahlbetonbau, 85(9), 238-243, 274-280, 299-304., Wilhelm Ernst unfd Sohn Verlag, berlin.
  6. EC 2, Design of concrete structures. Part 1: General rules for buildings, (1992), CEN European Committee for standardization.
  7. Favre, R. and Charif, H. (1994), Basic model and simplified calculations of deformations according to the CEB-FIB model Code 1990", ACI Structural Journal, 91(2), 169-177.
  8. Graubrier, C., (1989), "Structural analysis of the indeterminate reinforced concrete beams with considering of the modified material behaviours and comparision of the solutions with respect to elastic and plastic theories", Ph.D. thesis, Munich Technical University, Munich (In German).
  9. Ghali, A. (1993), "Deflection of reinforced concrete members: A critical review", ACI Structural Journal, 90(4), 364-373.
  10. Hognestad, E., (1951), "A study of combined bending and axial load in R/C members", University of Illinois Engineering Exp. Sta. Bull., 339, Illinois.
  11. Inan, M. (1988), "Strength of Materials", I.T.U Vakfi Yayin No: 25 Istanbul (In Turkish).
  12. Litzner, H.U., (1993), "General rules for design of concrete structures according to Eurocode 2", Beton-Kalender 1993, Ernst und Sohn, 509-687, Berlin (In German).
  13. Park, R. and Paulay, T., (1975), Reinforced Concete Structures, John Wiley Sons, Inc., Canada.
  14. Timoshenko, S.P. and Gere, J.M. (1988), Theory of Elastic Stability, McGraw Hill Co., Singapore.

피인용 문헌

  1. Numerical and experimental analysis of lateral stability in precast concrete beams vol.57, pp.10, 2005, https://doi.org/10.1680/macr.2005.57.10.635
  2. Analysis of equal leg single-angle section beams subjected to biaxial bending and constant axial compressive force vol.65, pp.2, 2009, https://doi.org/10.1016/j.jcsr.2008.04.009
  3. Elastic, full plastic and lateral torsional buckling analysis of steel single-angle section beams subjected to biaxial bending vol.63, pp.1, 2007, https://doi.org/10.1016/j.jcsr.2006.03.012