Structural Engineering and Mechanics

  • 제6권2호
  • /
  • Pages.143-159
  • /
  • 1998
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Progressive failure of symmetric laminates under in-plane shear : I-positive shear

  • Singh, S.B. (Indian Institute of Technology Kanpur) ;
  • Kumar, Ashwini (Indian Institute of Technology Kanpur) ;
  • Iyengar, N.G.R. (Indian Institute of Technology Kanpur)
  • 발행 : 1998.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this present work is to estimate the failure loads, associated maximum transverse displacements, locations and the modes of failure, including the onset of delamination, of thin, square symmetric laminates under the action in-plane positive (+ve) shear load. Two progressive failure analyses, one using the Hashin criterion and the other using a Tensor polynomial criterion, are used in conjunction with finite element method. First order shear deformation theory along with geometric non-linearity in the von Karman sense have been employed. Variation of failure loads and failure characteristics with five type of lay-ups and three types of boundary conditions has been investigated in detail. It is observed that the maximum difference between failure loads predieted by various criteria depends strongly on the laminate lay-up and the flexural boundary restraint. Laminates with clamped edges are found to be more susceptible to failure due to transverse shear (ensuing from the out of plane bending) and delamination, while those with simply supported edges undergo total collapse at a load slightly higher than the fiber failure load. The investigation on negative (-ve) in-plane shear load is in progress and will be communicated as part-II of the present work.

키워드

참고문헌

  1. Engelstad, S.P., Reddy, J.N. and Knight, N.F. Jr. (1992), "Postbuckling response and failure prediction of graphite epoxy plates loaded in compression", AIAA Journal, 30, 2106-2113. https://doi.org/10.2514/3.11187
  2. Fung, Y.C. (1965), Foundations of Solid Mechanics, Prentice Hall, .
  3. Hashin, Z. (1980), "Failure criteria for unidirectional fiber composites", J. Appl. Mech, 47, 329-334. https://doi.org/10.1115/1.3153664
  4. Hill, R. (1948), "A theory of yielding and plastic flow of anisotropic materals", Proc. of the Royal Society, Series A, 193, 281. https://doi.org/10.1098/rspa.1948.0045
  5. Hoffman, O. (1967), "The brittle strength of orthotropic materials", J. of Composite Materials, 1, 200-211. https://doi.org/10.1177/002199836700100210
  6. Kam, T.Y. and Sher, H.F. (1995), "Nonlinear and first-ply failure analysis of laminated composite crossply plates", J. of Composite Materials, 29, 463-485. https://doi.org/10.1177/002199839502900403
  7. Kosteletos, S. (1992), "Postbuckling response of laminated plates under shear loads", Composite Structures, 20.137-145. https://doi.org/10.1016/0263-8223(92)90020-D
  8. Lee, H.H. and Hyer, M.W. (1993), "Postbuckling failure of composite plates with holes", AIAA J., 31, 1293-1298. https://doi.org/10.2514/3.11766
  9. Reddy, J.N. and Pandey, A.K. (1987), "A first-ply failure analysis of composite laminates", Computers and Structures, 25, 371-393. https://doi.org/10.1016/0045-7949(87)90130-1
  10. Reddy, Y.S.N. and Reddy, J.N. (1992), "Linear and non-linear failure analysis of composite laminates with transverse shear", Composite Science and Technology, 44, 227-255. https://doi.org/10.1016/0266-3538(92)90015-U
  11. Singh, S.B., Kumar, A. and Iyengar, N.G.R. (1997), "Progressive failure of symmetrically laminated plates under uni-axial compression", Structural Engineering and Mechanics, 5(4), 433-450. https://doi.org/10.12989/sem.1997.5.4.433
  12. Tsai, S.W. (1965), "Strength characteristics of composite materials", NASA Contract Report, NASA CR-224.
  13. Tsai, S.W. and Wu, E.M. (1971), "A general theory of strength for anisotropic materials", J. of Composite Materials, 5, 58-80. https://doi.org/10.1177/002199837100500106
  14. Tsai, S.W. (1984), "A surve of macroscopic failure criteria for composite materials", J. of Reinforced Plastics and Composites, 3, 40-62. https://doi.org/10.1177/073168448400300102
  15. Tsai, S.W. (1986), "Composite design", Think Composite, Day-ton,OH.
  16. Turvey, G.J. (1980a), "An initial flexural failure analysis of symmetrically laminated cross-ply rectangular plates", Int. J. Solids and Struct., 16, 451-463. https://doi.org/10.1016/0020-7683(80)90043-8
  17. Turvey, G.J. (1980b), "Flexural failure analysis of angle-ply laminates of GFRP and CFRP", J. Strain Analysis, 15, 43-49. https://doi.org/10.1243/03093247V151043
  18. Turvey, G.J. (1980c), "A study of the onset of flexural failure in cross-ply laminated strips", Fiber Sci. Technology, 13, 325-356. https://doi.org/10.1016/0015-0568(80)90008-1
  19. Turvey, G.J. (1981), "Initial flexural failure of square, simply supported, angle-ply plates", Fiber Sci. Technol., 15, 47-63. https://doi.org/10.1016/0015-0568(81)90031-2
  20. Turvey, G.J. (1982), "Uniformly loaded, antisymmetric cross-ply laminated ,rectangular plates: an initial flexural failure analysis", Fiber Sci. Technol., 15, 1-10.
  21. Turvey, G.J. (1987), "Effects of shear deformation on the onset of flexural failure in symmetric cross-ply laminated rectangular plates", Composite Structures, 4, ed. I.H. Marshall, Elsevier Applied Science, London, 141-146.

피인용 문헌

  1. Progressive Failure Analysis of Laminated Composite Cylindrical Shell Roofs vol.15, pp.3, 2015, https://doi.org/10.1007/s11668-015-9951-6
  2. Postbuckling response and failure of symmetric laminates under uniform temperature rise vol.59, pp.1, 2003, https://doi.org/10.1016/S0263-8223(02)00186-1
  3. Postbuckling response and strength of laminates under combined in-plane loads vol.59, pp.5, 1999, https://doi.org/10.1016/S0266-3538(98)00125-0
  4. Postbuckling response and failure of symmetric laminated plates with rectangular cutouts under in-plane shear vol.34, pp.2, 2010, https://doi.org/10.12989/sem.2010.34.2.175
  5. Progressive failure and post-buckling response of tapered composite plates under uni-axial compression vol.82, pp.2, 2008, https://doi.org/10.1016/j.compstruct.2006.12.014
  6. Review of Degradation Models for Progressive Failure Analysis of Fiber Reinforced Polymer Composites vol.62, pp.1, 2009, https://doi.org/10.1115/1.3013822
  7. Postbuckling response of composite laminated plates with evolving damage vol.23, pp.2, 2014, https://doi.org/10.1177/1056789513489322
  8. Postbuckling strengths of composite laminate with various shaped cutouts under in-plane shear vol.92, pp.12, 2010, https://doi.org/10.1016/j.compstruct.2010.05.008
  9. Postbuckling response and failure of symmetric laminated plates with rectangular cutouts under uniaxial compression vol.29, pp.4, 2008, https://doi.org/10.12989/sem.2008.29.4.455
  10. Response and failure of square laminates under combined loads vol.55, pp.3, 2002, https://doi.org/10.1016/S0263-8223(01)00141-6
  11. Progressive failure of symmetric laminates under in-plane shear: Il-Negative shear vol.6, pp.7, 1998, https://doi.org/10.12989/sem.1998.6.7.757
  12. Postbuckling response and failure of symmetric laminates under in-plane shear vol.58, pp.12, 1998, https://doi.org/10.1016/S0266-3538(98)00032-3
  13. Fem Analysis of Progressive Failure for Composite Hypar Shells vol.52, pp.4, 2020, https://doi.org/10.1007/s11223-020-00202-w