Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)
- Volume 18 Issue 1
- /
- Pages.1-9
- /
- 1998
- /
- 1225-7842(pISSN)
- /
- 2287-402X(eISSN)
Effects of Wave Attenuation on the Acoustic Emission Amplitude Distribution of Injection-Molded Fiber/Plastic Composites
섬유/플라스틱 사출성형 복합재료의 음향방출 진폭분포에 대한 감쇠효과
- Choi, N.S. (Department of Mechanical Engineering, Hanyang University) ;
- Takahashi, Kiyoshi (Research Institute for Applied Mechanics, Kyushu University)
- 최낙삼 (한양대학교 기계공학과) ;
- Published : 1998.02.28
Abstract
The attenuation of acoustic emission (AE) waves was evaluated for injection-molded short-fiber-reinforced thermoplastic composites employing simulated AE waves. Values of attenuation coefficient (
짧은 섬유로 강화된 열가소성수지의 복합재료를 대상 재료로 하여 AE의 발생위치(AE source location)를 구하고 AE신호의 진폭분포에 미치는 감쇠 손실(attenuation loss)의 영향을 정량적으로 검토했다. 모의 AE파를 이용하여 측정된 감쇠율은 시험편내의 섬유체적함유율의 증가에 따라 단순 선형관계식으로 예상되는 값보다 더 작았다. 시험편에서 계측된 AE진폭분포에 감쇠손실을 보정한 결과, 시험편의 게이지부에 설정된 각 구역에서 서로 유사한 수준의 진폭분포가 나타났다. 또한 보정된 AE진폭은 시험편의 변형이 진행됨에 따라 더욱 크게 되었다. 따라서, AE진폭을 이용한 고분자복합재료의 손상해석에서는 AE파의 감쇠효과를 보정해야 됨이 확인되었다.
Keywords