Elastomers and Composites
- Volume 33 Issue 1
- /
- Pages.10-16
- /
- 1998
- /
- 2092-9676(pISSN)
- /
- 2288-7725(eISSN)
Mechanical and Thermal Properties of Cured Specimen or DGEBA/DDM System
DGEBA/DDM계 에폭시수지 경화 시험편의 기계적 및 열적특성
- Kim, Kong-Soo (Dept. of lnd. and Eng. Chem., Chungbuk National University) ;
- Park, Jun-Ha (Dept. of lnd. and Eng. Chem., Chungbuk National University) ;
- Kim, Ki-Wun (Dept. of lnd. and Eng. Chem., Chungbuk National University) ;
- Kim, Young-Jun (Dept. of lnd. and Eng. Chem., Chungnam Sanup University)
- Published : 1998.03.31
Abstract
In DGEBA/DDM system, the curing specimen are many curing factors which can affect on thermal and mechanical properties. This study was performed to prove the effect on curing specimen prepared by changing of the curing factors which are curing time and temperature of DGEBA/DDM system. As a result on thermal and mechanical properties, flexural strength, modulus and glass transition temperature (Tg) were increased with curing time and temperature were increased. It was found that the optimum curing condition of DGEBA/DDM system cure at
Keywords