DOI QR코드

DOI QR Code

유압 사축식 액셜 피스톤 펌프의 로드 구동에 관한 연구 제1보: 구동 메카니즘의 이론해석

A Study on the Driving of Rods in Hydraulic Bent-axis-type Axial Piston Pump Part 1: The Theoretical Analysis of Driving Mechanism

  • 김종기 (전북대학교 정밀기계공학과 대학원) ;
  • 오석형 (군산대학교 기계공학부) ;
  • 정재연 (전북대학교 기계공학부, 자동차 신기술연구소)
  • 발행 : 1998.12.01

초록

Recently, bent-axis-type axial piston pumps driven by rods being in extensively used in the world, because of simple design, lightweight, effective cost. So, to guarantee the quality of bent-axis-type axial piston pumps driven by rods, it is necessary to know characteristics of the driving mechanism of rods. But, as they perform both reciprocating and spinning motions, it is difficult to understand driving mechanism. In this paper, I studied the theoretical driving mechanisms of cylinder block driven by rods through geometric method. I found that the cylinder block was driven by one rod in limited area and the driving area was changed by rod's tilting angle and cylinder block's swivel angle.

키워드

참고문헌

  1. Pump design by force balance v.14 no.11 Franco, N.
  2. ASME, Paper 63-WA-90 Minimum power loss conditions of the pistons and valve plate in axial-type pumps and motors Shute, N.A.;Turnbull, D.E.
  3. Proc. I. Mech. E. v.181 no.1 Hydrodynamic factors affecting the design of valve plates and thrust bearings McKeown, J.;Milner, D.A.;Shute, N.A.;Turnbull, D.E.
  4. BHRA, Paper G2 The balancing of piston and valve plate forces in axial-piston pumps and motors Hibbert, G.;Lindsay, D.V.;Shute, N.A.;Turnbull, D.E.
  5. ASLE Trans. v.18 no.1 Tribological Interaction between piston and cylinder of a model high pressure hydraulic pump Dowd, J.R.;Barwell, E.T.
  6. 6th International FLUID POWER SYMPOSIUM The effects of centrifugal load and ball friction on the lubrication of slippers in axial piston pumps Hooke, C.J.;Kakouliis, Y.P.
  7. 油壓と空氣壓 v.23 no.4 斜板式アキシアルピストンポンプ·モタの低速におけるピストン~シリンタ間潤滑狀態 方義;池谷光榮
  8. 北陸信越支部第31基總會講演會論文集 油壓ピストンポンプ·モタにあけるピストン~シリダ間の油膜厚さ測定 山岐;ほか