Electric and Electrochemical Characteristic of PMMA-PEO Gel Electrolyte for Rechargeable Lithium Battery

  • 박수길 (충북대학교 공대 화학공학부 공업화학과) ;
  • 박종은 (충북대학교 공대 화학공학부 공업화학과) ;
  • 이홍기 (우석대학교 공대 화학공학과) ;
  • 이주성 (한양대학교 공대, 화학공학과)
  • Published : 1998.10.01

Abstract

The new type polymer electrolyte composed of polymethyl methacrylate(PMMA) - polyethy leneoxide(PEO) contain $LiClO_4$ -EC/PC was developed for the weightless and long or life time of lithium polymer batery system with using polyaniline electrode. the gel type electrolytes were prepared by PMMA with PEO at different lithium salts in the glove box. The minimum thickness of PMMA-PEO gel electrolyte for the slim type is about(400~450$\mu\textrm{m}$. These gel electrolyte showed good compatibility with lithium electrode. The test cell Li/polymer electrolyte/polyaniline solid state cell which was prepared by different lithium salt was researched by electrochemical technique.

Keywords

References

  1. J. electrochem. Soc. v.138 Liu, M.;Visco, S.J.;L.C.
  2. Proc. New Sealed Rechargeable Batteries Supercapacitors Oyama, N.(et al.)
  3. J. Power Sources F. Coowar(et al.)
  4. Solid State Ionic v.40/41 L. Yang(et al.)
  5. J. Electrochem. Soc. no.142 D. Peramunage;D. M. Pasquariello.;K. M. Abraham
  6. J. Electrochem. Soc. no.136 S. J. Visco;C. C. Mailhe;L. C. De jonghe;M. B. Armand
  7. Sloid State Ionics v.18/19 I. D. Raistic
  8. Handbuch der Experimental Physik, Bd. xⅡ C. Tubandt
  9. Sloid State Ionics no.11 J. Mizusaki;K. Arai;K. Fueki
  10. J. Electrochem. Soc. v.104 K. Kiukkola;C. Wagner
  11. Proc. CITCE 7th C. Wagner
  12. Rev. Chim. Minerale no.17 J. Mizusaki;K. Fueki
  13. Bull. Chem. Soc. Jpn. no.51 J. Mizusaki;K. Fueki;T. Mukaibo