VC 첨가가 Ti(CN)계 써메트의 미세구조 및 기계적 성질에 미치는 영향

Effect of VC Addition on the Microstructure & Mechanical Properties of Ti(CN)-based Cermet

  • 발행 : 1998.12.01

초록

The amount of VC and C/N ratio in Ti(CN) was varied to investigate the effect of VC addition on the mi-crostructural change in Ti(CN)-Ni system. As the amount of VC addition increases in Ti(C0.7N0.3)-20Ni sys-tem a complete solid solution was observed in Ti(C0.7N0.3)-20Ni-25VC system. It implies that the ratio of the dissolution rates of Ti(C0.7N0.3)to that of VC is nearly 2:1 at the sintering conditions used in this study. It was found from the experiments that the system composed of the Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. That is among Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. This is among Ti(C1-xNx) phases the dissolution rate of Ti(C0.3N0.7) is the lowest. Also fracture toughness(KIC) of the cermet was measured by indentation method. Attentions were paid to crack propagation path to look for a dominant fracture mode and to cor-relate it with fracture toughness values. The fracture toughness was relatively high with the addition of VC content. But the addition of a large VC content reduced the overall toughness of the cermet. This result is explained with the difference in fracture mode.

키워드

참고문헌

  1. Mod. Dev. in PM v.3 Cemented Titanium Carbide Cutting Tools D. Moskowitz;M. Humenik, Jr.
  2. Mat. Sci. and Eng. v.A163 Titanium Carbonitride-based Cetmet : Processes and pwperties S. Zhang
  3. Pow. Metall. Int. v.21 The Story of Cermet P. Ettmayer
  4. J. Am. Cer. Soc. v.66 no.12 Liquid-Phase Sintering of TiC-Ni Composites D.J. Miller;J.A. Pask
  5. Int. J. of Refractory Metals & Hard Matrials v.13 Ti(C,N) Cermets-Merallur & Properties P. Ettmayer(et al.)
  6. Int. J. of Refractory Metals & Hard Matrials v.13 Mechanical Properties and Microstructure of Submicro Cermets M. Ehira;A. Egami
  7. Mat. Sci. and Eng. v.A15;A106 Cemented Titanium Carbonitrides : Effects of Carbon-to-Nitrogen Ratio Temperature D. Moskowitz
  8. 박사학위논문 다성분Ti(C,N)계 써메트의 미?S직과 기계적 성질 양준규
  9. Int. J. of Pow. Metall. & Pow. Thec. v.13 no.1 The Pseudoquaternary System WC-TaC-TiC-VC and VC Containing Cermeted Carbide R. Kieffer;W. Mader;H. Nowotny;P. Ettmayer
  10. J. Mat. Sci. v.20 Indentation Fracture WC-Co Cermets D.K. Shetty;I G. Wright;P.N. Mincer;A.H. Clauer
  11. J. Mat. Sci. v.25 Fracture Analysis of Cobalt-Bonded Tungsten Carbide Composite D. Han;J.J. Mecholsky
  12. J. Mat. Sci. v.10 Indentation Fracture : Princples and Application B.R. Lawn;T.R. Wilshaw
  13. Mat. Sci. Eng. A A Study on Microstructure Change in Ti(CN)-NbC-Ni Cermet System Qi Feng;S. Kang
  14. 석사학윈논문 Ti(CN)-Ni 계에 HfC첨가가 미세구조에 미치는 영향 문석기
  15. Acta Mater A Study on the Ti(CN) Formation and its Hardness I.J. Jung;S. Kang;S.H. Jhi;J. Ihm
  16. Powd. Met. Int. v.14 no.4 Effect of Nitrogen Content on Grain Growth in Ti(C,N)-Ni-Mo Sintered Alloy M. Fukuhara;H. Mitani